Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    VLAN Problem VIA based Nexgate NSA-1041 since 1.2.3 RC2

    Scheduled Pinned Locked Moved Hardware
    17 Posts 5 Posters 10.2k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mibo
      last edited by

      i have tried disabling hardware checksum offloading but no luck…

      on fxp0 the RXSUM and TXSUM option disappeared, but on vlan0 and fxp1 not.

      see ifconfig

      fxp0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=2198 <vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:ce
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::210:f3ff:fe0e:19ce%fxp0 prefixlen 64 scopeid 0x1
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fxp1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:cf
        inet6 fe80::210:f3ff:fe0e:19cf%fxp1 prefixlen 64 scopeid 0x2
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fxp2: flags=8802 <broadcast,simplex,multicast>metric 0 mtu 1500
        options=219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:d0
        media: Ethernet autoselect (none)
        status: no carrier
fxp3: flags=8802 <broadcast,simplex,multicast>metric 0 mtu 1500
        options=219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:d1
        media: Ethernet autoselect (none)
        status: no carrier
lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
enc0: flags=0<> metric 0 mtu 1536
pfsync0: flags=41 <up,running>metric 0 mtu 1460
        pfsync: syncdev: lo0 syncpeer: 224.0.0.240 maxupd: 128
pflog0: flags=100 <promisc>metric 0 mtu 33204
vlan0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=3 <rxcsum,txcsum>ether 00:10:f3:0e:19:cf
        inet6 fe80::210:f3ff:fe0e:19ce%vlan0 prefixlen 64 scopeid 0x9
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        vlan: 10 parent interface: fxp1</full-duplex></rxcsum,txcsum></up,broadcast,running,simplex,multicast></promisc></up,running></up,loopback,running,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></broadcast,simplex,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></broadcast,simplex,multicast></full-duplex></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></up,broadcast,running,simplex,multicast></full-duplex></vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></up,broadcast,running,simplex,multicast>
      1 Reply Last reply Reply Quote 0
      • M
        mibo
        last edited by

        Switching the interfaces will switch the RXCSUM Options.

        see ifconfig

        fxp0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:ce
        inet6 fe80::210:f3ff:fe0e:19ce%fxp0 prefixlen 64 scopeid 0x1
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fxp1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=2198 <vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:cf
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::210:f3ff:fe0e:19cf%fxp1 prefixlen 64 scopeid 0x2
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fxp2: flags=8802 <broadcast,simplex,multicast>metric 0 mtu 1500
        options=219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:d0
        media: Ethernet autoselect (none)
        status: no carrier
fxp3: flags=8802 <broadcast,simplex,multicast>metric 0 mtu 1500
        options=219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:d1
        media: Ethernet autoselect (none)
        status: no carrier
lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
enc0: flags=0<> metric 0 mtu 1536
pfsync0: flags=41 <up,running>metric 0 mtu 1460
        pfsync: syncdev: lo0 syncpeer: 224.0.0.240 maxupd: 128
pflog0: flags=100 <promisc>metric 0 mtu 33204
vlan0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=3 <rxcsum,txcsum>ether 00:10:f3:0e:19:ce
        inet6 fe80::210:f3ff:fe0e:19ce%vlan0 prefixlen 64 scopeid 0x9
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        vlan: 10 parent interface: fxp0</full-duplex></rxcsum,txcsum></up,broadcast,running,simplex,multicast></promisc></up,running></up,loopback,running,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></broadcast,simplex,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></broadcast,simplex,multicast></full-duplex></vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></up,broadcast,running,simplex,multicast></full-duplex></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></up,broadcast,running,simplex,multicast>
        1 Reply Last reply Reply Quote 0
        • P
          Perry
          last edited by

          You could try the manual way
          ifconfig fxp0 -rxcsum -txcsum

          /Perry
          doc.pfsense.org

          1 Reply Last reply Reply Quote 0
          • M
            mibo
            last edited by

            sorry.. did not work. the option disappears but it still not work..

            i had a look at a packet capture. At the DHCP discover on the WAN interface i can not see a VLAN tag.
            other packet from my network come with a correct VLAN tag.

            the vlan id is 10 and the following value appears in the ip packet:

            Differentiated Services Field: 0x10 (DSCP 0x04: Unknown DSCP; ECN: 0x00)
0001 00.. = Differentiated Services Codepoint: Unknown (0x04)
.... ..0\. = ECN-Capable Transport (ECT): 0
.... ...0 = ECN-CE: 0

            i think the vlan tagging is not working correctly…

            1 Reply Last reply Reply Quote 0
            • jimpJ
              jimp Rebel Alliance Developer Netgate
              last edited by

              If it's not working properly, it must be something specific to your fxp chip revision.

              I'm using VLANs heavily on fxp cards on 1.2.3-RELEASE and it works just fine for me, either with onboard NICs or add-in cards. It does look like yours have tso, you might try disabling that if it isn't already:

              sysctl -w net.inet.tcp.tso=0

              The output of these commands might also help:

              # pciconf -lv | grep fxp0
fxp0@pci0:0:11:0:       class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08 hdr=0x00

# ifconfig -m fxp0
fxp0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=2009 <rxcsum,vlan_mtu,wol_magic>capabilities=2049 <rxcsum,vlan_mtu,polling,wol_magic>ether 00:02:b3:03:80:28
        inet6 fe80::202:b3ff:fe03:8028%fxp0 prefixlen 64 scopeid 0x1 
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        supported media:
                media autoselect
                media 100baseTX mediaopt full-duplex
                media 100baseTX
                media 10baseT/UTP mediaopt full-duplex
                media 10baseT/UTP
                media none
                media 100baseTX mediaopt hw-loopback</full-duplex></rxcsum,vlan_mtu,polling,wol_magic></rxcsum,vlan_mtu,wol_magic></up,broadcast,running,simplex,multicast>

              Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

              Need help fast? Netgate Global Support!

              Do not Chat/PM for help!

              1 Reply Last reply Reply Quote 0
              • M
                mibo
                last edited by

                TSO is already disabled.

                # sysctl -w net.inet.tcp.tso
net.inet.tcp.tso: 0

                here the infos:

                # pciconf -lv | grep fxp0
fxp0@pci0:0:9:0:        class=0x020000 card=0xffffffff chip=0x12098086 rev=0x10 hdr=0x00

                # ifconfig -m fxp0
fxp0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=2198 <vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>capabilities=21db <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,polling,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:ce
        inet6 fe80::210:f3ff:fe0e:19ce%fxp0 prefixlen 64 scopeid 0x1
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        supported media:
                media autoselect
                media 100baseTX mediaopt full-duplex
                media 100baseTX
                media 10baseT/UTP mediaopt full-duplex
                media 10baseT/UTP
                media none
                media 100baseTX mediaopt hw-loopback</full-duplex></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,polling,vlan_hwcsum,tso4,wol_magic></vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></up,broadcast,running,simplex,multicast>
                1 Reply Last reply Reply Quote 0
                • jimpJ
                  jimp Rebel Alliance Developer Netgate
                  last edited by

                  Looks like yours has a later chip revision and claims to do VLANs in hardware. Mine doesn't claim such support, not sure any of them do.

                  Perhaps it's a problem along those lines, but unfortunately it's a bit beyond my level of expertise. It might be interesting to try a stock FreeBSD 7.2 install on there to see if you have similar problems, or it may be easier to try a pfSense 2.0 beta snapshot to see if the problem persists on FreeBSD 8.

                  Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                  Need help fast? Netgate Global Support!

                  Do not Chat/PM for help!

                  1 Reply Last reply Reply Quote 0
                  • M
                    mibo
                    last edited by

                    So i have tested a pfSense 2.0 snapshot.
                    The same tests as before were made but the problem also exists in this version with the same behaviour.

                    to complete the tests here the outputs:

                    # ifconfig -m fxp0
fxp0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=2198 <vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>capabilities=21db <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,polling,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:ce
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::210:f3ff:fe0e:19ce%fxp0 prefixlen 64 scopeid 0x1
        nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        supported media:
                media autoselect
                media 100baseTX mediaopt full-duplex
                media 100baseTX
                media 10baseT/UTP mediaopt full-duplex
                media 10baseT/UTP
                media none
                media 100baseTX mediaopt hw-loopback</full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,polling,vlan_hwcsum,tso4,wol_magic></vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></up,broadcast,running,simplex,multicast>

                    # ifconfig
fxp0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=2198 <vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:ce
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::210:f3ff:fe0e:19ce%fxp0 prefixlen 64 scopeid 0x1
        nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fxp1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=2198 <vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic>ether 00:10:f3:0e:19:cf
        inet6 fe80::210:f3ff:fe0e:19cf%fxp1 prefixlen 64 scopeid 0x2
        nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
...

fxp1_vlan10: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        ether 00:10:f3:0e:19:cf
        inet6 fe80::210:f3ff:fe0e:19ce%fxp1_vlan10 prefixlen 64 scopeid 0xa
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        vlan: 10 parent interface: fxp1</full-duplex></performnud,accept_rtadv></up,broadcast,running,simplex,multicast></full-duplex></performnud,accept_rtadv></vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></up,broadcast,running,simplex,multicast></full-duplex></performnud,accept_rtadv></vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic></up,broadcast,running,simplex,multicast>

                    Any idea how to proceed?

                    I have found the following lines in the FreeBSD Release Notes:

                    The fxp(4) driver has been improved. Changes include:

                    • Rx checksum offload support for 82559 or later controllers has been added
                    • VLAN hardware tag insertion/stripping support and Tx/Rx checksum offload for VLAN frames support have been added. Note that the VLAN hardware assistance is available only on 82550 or 82551-based controllers.

                    pfSense recognize my card as a "Intel 82559ER". Can the VLAN hardware support be the issue? Like using VLAN hardware tag but my card cannot do this?

                    1 Reply Last reply Reply Quote 0
                    • jimpJ
                      jimp Rebel Alliance Developer Netgate
                      last edited by

                      Try this:

                      ifconfig fxp0 -vlanhwtag -vlanhwfilter

                      Not sure about the hwfilter but try it anyhow, if it doesn't work, try just -vlanhwtag

                      That should disable the hardware tagging. If that works, install the shellcmd package and add a command in there for that. Might help for now.

                      Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                      Need help fast? Netgate Global Support!

                      Do not Chat/PM for help!

                      1 Reply Last reply Reply Quote 0
                      • M
                        mibo
                        last edited by

                        Solved!
                        at first sight.

                        only disabling hwtag.

                        ifconfig fxp0 -vlanhwtag

                        I will do some more tests on the system till it goes back as my carp slave (with many VLANs ;-)).

                        Thanks a lot for your help!

                        1 Reply Last reply Reply Quote 0
                        • F
                          Fakster
                          last edited by

                          Hey mibo

                          would you know where I can find a pdf manual for the nsa 1041 ?

                          I have been given one but no instructions for hardware i.e. the pin header info
                          for power reset etc

                          any help appreciated, thanks

                          1 Reply Last reply Reply Quote 0
                          • M
                            mibo
                            last edited by

                            Hi Fakster,

                            have a look at the user manual:
                            http://www.nexcom.com/ProductModel_Download.aspx?id=97c0aec4-d471-49af-b4f5-78f12f0c57a8

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.