Captive portal behind squid?

0tt0

Not really sure. I have problems and noone seems to be able to explain why it doesn't work. I got CP to work briefly both with and without transparent squid and then it died completely after I installed-and-removed imspector(?).

There seem to be some kind of problem when several packages are listening and redirecting at the same time, which feels like logical.

I don't think that explains why my config doesn't work now though, since I have removed squid etc, but perhaps old stuff can cause problems somehow.

I like squid a lot but it feels like it should be run on a seperate machine to fully work.

A few resent threads involving this that you may want to read:

http://forum.pfsense.org/index.php/topic,19585.0.html

http://forum.pfsense.org/index.php/topic,20206.0.html

http://forum.pfsense.org/index.php/topic,20134.0.html

I use: 1.2.3-RC3 built on Tue Oct 6 01:32:12 UTC 2009 FreeBSD 7.2-RELEASE-p4 i386

eri--

You cannot on 1.2.3 or previous versions.

periko

Thanks all for your great info, appreciated.

"I like squid a lot but it feels like it should be run on a seperate machine to fully work."

I had seen this before, maybe 2.0 will have a better squid performance, but this the time let us know.

Thanks my friends again!!!

0tt0

@periko:

I had seen this before, maybe 2.0 will have a better squid performance, but this the time let us know.

Just a note, I have squid 2.7.7 running nicely again, it's just CP that doesn't work and now it doesn't matter whether or not squid is active on the same interface or not, CP is dead any way :(
Apart from now and then stopped logging after reboot (earlier versions) I haven't really had any hard issues with squid itself.

Cheers,

XIII

I am able to do it with 1.2.2

mikesamo

with transparent squid and are you using squidguard ?

XIII

just squid, no squidguard

CarlMGregory

@ermal:

You cannot on 1.2.3 or previous versions.

Hu? I use squid, squidGuard and CaptivePortal on 1.2.3-RELEASE. They all work fine for me.

heitor.lessa

@CarlMGregory:

@ermal:

You cannot on 1.2.3 or previous versions.

Hu? I use squid, squidGuard and CaptivePortal on 1.2.3-RELEASE. They all work fine for me.

Periko,

I´m running squid (transparent) w/ squidGuard and CP w/ Radius too, everything works fine.

Att.
Heitor Lessa
Blog -> http://tinodiaadia.wordpress.com

rhy7s

@Heitor:

Periko,

I´m running squid (transparent) w/ squidGuard and CP w/ Radius too, everything works fine.

Att.
Heitor Lessa
Blog -> http://tinodiaadia.wordpress.com

That's cool, you haven't noticed any delays like http://forum.pfsense.org/index.php/topic,11105.0.html?

heitor.lessa

@rhy7s:

@Heitor:

Periko,

I´m running squid (transparent) w/ squidGuard and CP w/ Radius too, everything works fine.

Att.
Heitor Lessa
Blog -> http://tinodiaadia.wordpress.com

This happened w/ I was using 1.2.2 Version.. but when I upgrade to 1.2.3-RELEASE works fine.

But.. I use CP + RADIUS w/ proxy transparent, following this tutorial -> http://files.pfsense.org/tutorials/cp_config/radius_win2k3.htm

Att.
Heitor Lessa
Blog -> http://tinodiaadia.wordpress.com
That's cool, you haven't noticed any delays like http://forum.pfsense.org/index.php/topic,11105.0.html?