MultiWan+10.0.0.0/8+Mylan–FineTune Question

biomecanoid

HI,

I have read the tutorial here and implemented a dual wan configuration and i mean to install a 3rd wan soon. But i dont think it works very well cause when i want to access the modems on the wan interfaces even if i have implemented NAT the modem's pages load very slow and with packet loss. Plus here where i live we have a wireless community (where you connect with satelite dish and pc with MikrotikOS on the roof) called AWMN and this community works as a mini internet with its own websites and services and this network works with 10.0.0.0/8 addresses and its websites end in *.awmn, i have tired to put that on pfsense with no luck.

Here are my specs:

NETWORK
WanIP : 192.168.2.0/24
Wan2IP : 192.168.1.0/24
Wan3IP : To be implented soon but i must know how to put it in the Loadbalancer pool
Awmn : 10.32.42.1 My GW on the roof with MikrotikOS
Lan : 192.168.5.0/24

HARDWARE
Minitx: G03-7F2WE-F with via C7 1ghz and 1Gb ram
HD: Compact Flash to IDE 8Gb with no Swap
Ethernet: Onboard Ethernet+Pci Gigabite+DaughterBoard with 3 Gigabite etherenet = 5 ethernet IFS

Here is a video of the my setup for the Wireless AWMN network:
http://www.youtube.com/watch?v=arlMmpwgXgA

Here are some Screeshots of PfSense and Miktrotik:

LoadBalancer.JPG_thumb

Miktorik.JPG_thumb

biomecanoid

More pics…

Lan.jpg_thumb

biomecanoid

More pics…

Wan.jpg_thumb

biomecanoid

More pics…

Wan2.jpg_thumb

biomecanoid

More pics…

Nat.jpg_thumb

biomecanoid

More pics…

Status.jpg_thumb

biomecanoid

More pics…

Firewall.jpg_thumb

biomecanoid

.
If you please can spot out mistakes or ommisions to my setup and give me hints on your to improve things and how can i implement the 3rd internet , be able to access the modem's Webgui in a better way and also include the AWMN Wifi network it will very helpfull for me since internet is crusial to my line of work and i need to have multi-wan to have reliable and fast internet. I can provide any details you would possible need to draw out your conclusions. Also i want to add that the second wan has the most severe problems with packet loss even even trying to look at the modems webgiu

Thanks :)

biomecanoid

some more info:
192.168.2.100 is the modem/router on one wan
and
192.168.1.1 is the modem/routeron the other wan

C:\DOCUME~1\ADMINI~1>tracert 192.168.2.100

Tracing route to 192.168.2.100 over a maximum of 30 hops

1 89 ms 97 ms 99 ms dsldevice.lan [192.168.1.254]
2 35 ms 35 ms 37 ms bbras-llu-kln-08L0.forthnet.gr [194.219.231.70]

**This is working well …

but**

C:\DOCUME~1\ADMINI~1>tracert 192.168.1.1

Tracing route to TALOS.lan [192.168.1.1]
over a maximum of 30 hops:

1 42 ms 3 ms 4 ms . [192.168.2.1]
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.

This is not

biomecanoid

.
Feb 22 01:58:52 kernel: arpresolve: can't allocate route for 192.168.1.254
Feb 22 01:58:56 kernel: arplookup 192.168.1.254 failed: host is not on local network

Plus i think that the 2nd wan is used rarely. I need your help since this is only my 2nd pfsense setup i was using other linux firewalls so far but pfsense is far superior cause of the multi wan support

biomecanoid

i fixed most of my problems and now the second wan interface doesnt resolve ip addresses. i have dns problems from the wan2