Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Supermicro X7SPA-H

    Scheduled Pinned Locked Moved Hardware
    83 Posts 32 Posters 74.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      tractng
      last edited by

      Do you know if the pci-e x4 allows a card other then a video card.  I am interested in getting the board and put a 3ware 9650 in it.

      Looking to run openfiler.

      thanks,
      tony

      1 Reply Last reply Reply Quote 0
      • S
        scoop
        last edited by

        AFAIK there is no reason to believe only a graphics card would work in that PCI-e slot. Just make sure the expansion card you're going to use is compatible with PCI-e x4 or lower.

        I'm also looking into buying one of these new pineview mobo's from SuperMicro and running pfSense on it. I haven't dug into all the chipset specs yet but I would also be interested to know if a stock pfSense 1.2.3 install would run on it.

        1 Reply Last reply Reply Quote 0
        • S
          sosdk
          last edited by

          Here is a discusion of the board for UnRaid - a NAS OS

          http://lime-technology.com/forum/index.php?topic=5133.0

          The PCI-e slot supports other cards than a graphics card.

          1 Reply Last reply Reply Quote 0
          • M
            Mookatroid
            last edited by

            Has anyone found any stock available for immediate purchase ?

            If so, please post.

            North American source preferred, but anything will be helpful :)

            Thanks!

            1 Reply Last reply Reply Quote 0
            • R
              rkelleyrtp
              last edited by

              Wow - you  just missed it!  Provantage had 4 in stock this morning.    http://www.provantage.com/supermicro-x7spa-h~7SUPM362.htm

              If it were me, I would wait until the "X7SPA-HF" model is available.  That one has embedded IPMI (built-in KVM over IP) which is essential for a headless box stuck in a closet or datacenter.

              1 Reply Last reply Reply Quote 0
              • M
                Mookatroid
                last edited by

                Yes … it is the X7SPA-HF model that I am actually after.
                Should have said that.

                Either way, can anyone clarify what size of pico psu should be used for this board?  Intel forums are all over the map.

                Wondering if I should get a PicoPSU-150-XT w/102Watt adapter or if the PicoPSU-90 w/60Watt adapter is sufficient??

                Other than RAM, the only other thing I will be running is an SSD .. and maybe a few extra case fans if the little bugger runs too hot.

                Anyone have any solid info re: minimum / recommended power supplies ?

                re: your comment about IPMI ... I noticed that fro the HF model as well but could not determine if there was an extra module to buy to use it.   It also says "shared with LAN1" so I hope that means that LAN1 is used to communicate with it and than LAN1 can also be used for the pfSense LAN/WAN config, etc.

                1 Reply Last reply Reply Quote 0
                • S
                  SecretAsianMan
                  last edited by

                  Update time.

                  My pair of X7SPA-H boards arrived, as did the other necessary parts.  On Saturday, I built my two mini-servers and confirmed that the parts work.  I used very nice Silverstone black cube cases that have lots of room for future expansion.  I'll post part descriptions and pictures in several days, when I am finished with the project.

                  pfSense is not installed yet.  My plan to boot from a 4GB thumb drive hit a snag: the pfSense embedded image wants to use serial console instead of VGA.  I can't be bothered with that, as I got rid of my last RS-232 junk many years ago.  It seems a few others have been through this before, so I will look at those threads in depth and figure out the best way around the problem.

                  1 Reply Last reply Reply Quote 0
                  • T
                    tractng
                    last edited by

                    The manual says it needs 2-amp from the 5v standby rail.

                    I got the chenbro case, a little pricey :) that has 180 watts psu.

                    http://www.newegg.com/Product/Product.aspx?Item=N82E16811123128&cm_re=chenbro--11-123-128--Product

                    tnt

                    @Mookatroid:

                    Yes … it is the X7SPA-HF model that I am actually after.

                    Should have said that.

                    Either way, can anyone clarify what size of pico psu should be used for this board?  Intel forums are all over the map.

                    Wondering if I should get a PicoPSU-150-XT w/102Watt adapter or if the PicoPSU-90 w/60Watt adapter is sufficient??

                    Other than RAM, the only other thing I will be running is an SSD .. and maybe a few extra case fans if the little bugger runs too hot.

                    Anyone have any solid info re: minimum / recommended power supplies ?

                    re: your comment about IPMI ... I noticed that fro the HF model as well but could not determine if there was an extra module to buy to use it.   It also says "shared with LAN1" so I hope that means that LAN1 is used to communicate with it and than LAN1 can also be used for the pfSense LAN/WAN config, etc.

                    1 Reply Last reply Reply Quote 0
                    • E
                      evildave
                      last edited by

                      @Mookatroid:

                      Yes … it is the X7SPA-HF model that I am actually after.
                      Should have said that.

                      Either way, can anyone clarify what size of pico psu should be used for this board?  Intel forums are all over the map.

                      Wondering if I should get a PicoPSU-150-XT w/102Watt adapter or if the PicoPSU-90 w/60Watt adapter is sufficient??

                      Other than RAM, the only other thing I will be running is an SSD .. and maybe a few extra case fans if the little bugger runs too hot.

                      Anyone have any solid info re: minimum / recommended power supplies ?

                      re: your comment about IPMI ... I noticed that fro the HF model as well but could not determine if there was an extra module to buy to use it.   It also says "shared with LAN1" so I hope that means that LAN1 is used to communicate with it and than LAN1 can also be used for the pfSense LAN/WAN config, etc.

                      We've just gotten in a (Supermicro Xeon) board with what's probably the same module.  The documentation is pretty slim but it seems like you can put the IMPI directly onto a seperate 802.1q tagged VLAN and use the rest of the VLANs and untagged as usual.

                      1 Reply Last reply Reply Quote 0
                      • M
                        Mookatroid
                        last edited by

                        @tractng:

                        The manual says it needs 2-amp from the 5v standby rail.

                        I got the chenbro case, a little pricey :) that has 180 watts psu.

                        http://www.newegg.com/Product/Product.aspx?Item=N82E16811123128&cm_re=chenbro--11-123-128--Product

                        tnt

                        That is helpful to know if I go with a bigger case, but I am still motivated to use a case with a PicoPSU.
                        Can anyone tell me if the PicoPSU-150-XT will drive this board OK ?
                        Intel's D510MO board is recommended to be used with a PicoPSU-80, so one might assume the 150Watt would be more than plenty.
                        But I'd like to know this before ordering parts.

                        I emailed SuperMicro support, but so far all they have confirmed is that the X7SPA-HF works in their 1U chassis w/200Watt P/S

                        1 Reply Last reply Reply Quote 0
                        • C
                          clarknova
                          last edited by

                          @Mookatroid:

                          Can anyone tell me if the PicoPSU-150-XT will drive this board OK ?
                          Intel's D510MO board is recommended to be used with a PicoPSU-80, so one might assume the 150Watt would be more than plenty.
                          But I'd like to know this before ordering parts.

                          I have a Zotac ION-ITX board with Atom 330, nvidia Ion, 2 * 3.5" hdd. It runs typically around 35W, and I've never seen it hit 50W (using a brick power supply). I'm not sure you could make the X7SPA-H pull 150W if you wanted to.

                          db

                          1 Reply Last reply Reply Quote 0
                          • S
                            Skud
                            last edited by

                            I just finished building a new, completely silent, no moving parts pfSense system using this board (actually, the X7SPA-HF). The -HF includes on-board IPMI 2.0.

                            At idle it's using ~20 watts. Maxxing my cable connection at ~25Mbps I'm seeing around 8% CPU usage.

                            It's definitely a sweet little board. ICR9R, good Intel NICs, and I can verify that the PCIe x16 slot works with cards other than video. I have a PCIe x4 Intel PRO/1000 PT dual port card and pfSense sees it. I had to take it out though as I don't have a 90* PCIe adapter yet.

                            The IPMI is very nice. It gives full control over the board via web management (don't even need to install software on your pc). You get temps, alerts, and console access via the web interface.

                            It's running off a SATA -> CompactFlash adapter that mounts in one of the expansion slots. The card sticks out the back like on a Cisco router.

                            This is the case: http://www.microcenter.com/single_product_results.phtml?product_id=0294113

                            Riley

                            1 Reply Last reply Reply Quote 0
                            • M
                              mrbostn
                              last edited by

                              Nice write up. Very helpful. By the way what are the temps like? What type of power supply are you using?

                              Thanks again!

                              1 Reply Last reply Reply Quote 0
                              • S
                                Skud
                                last edited by

                                CPU Temp @ idle is 45C with a max of 90C.

                                Keep in mind this is fanless. I'm sure with some airflow it would be pretty close to ambient..

                                Riley

                                1 Reply Last reply Reply Quote 0
                                • M
                                  mrbostn
                                  last edited by

                                  Thanks-

                                  Are you using a pico power supply?

                                  1 Reply Last reply Reply Quote 0
                                  • S
                                    Skud
                                    last edited by

                                    No, a 60 watt DC-DC unit came with the case.

                                    Also, tonight I added a small 40mm fan to the one side of the case. It's only rated at 7cfm, but it's for all intents and purposes silent. It's brought the CPU and system temp down quite a bit.

                                    Riley

                                    1 Reply Last reply Reply Quote 0
                                    • M
                                      maluk
                                      last edited by

                                      Can this board deal with 500Mbps routing traffic? from one network adapter to other ?

                                      1 Reply Last reply Reply Quote 0
                                      • C
                                        clarknova
                                        last edited by

                                        @maluk:

                                        Can this board deal with 500Mbps routing traffic? from one network adapter to other ?

                                        I quite doubt that, even under best case scenario. Somebody with the board go and prove me wrong though.

                                        db

                                        1 Reply Last reply Reply Quote 0
                                        • C
                                          Cino
                                          last edited by

                                          Been running 2.0 on this board for about 2 weeks now…Not a bad board at all... Only issue I have is that vnstat doesn't see any traffic... Not sure its because i'm using 2.0 or if its hardware issue... Need to try 1.2.3 and see if that works...

                                          Here is the output of dmesg:

                                          Copyright © 1992-2010 The FreeBSD Project.
                                          Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                                          The Regents of the University of California. All rights reserved.
                                          FreeBSD is a registered trademark of The FreeBSD Foundation.
                                          FreeBSD 8.0-STABLE #1: Wed Mar 31 12:46:07 EDT 2010
                                              sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                                          Timecounter "i8254" frequency 1193182 Hz quality 0
                                          CPU: Intel(R) Atom(TM) CPU D510  @ 1.66GHz (1669.16-MHz 686-class CPU)
                                            Origin = "GenuineIntel"  Id = 0x106ca  Stepping = 10
                                            Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x40e31d <sse3,dtes64,mon,ds_cpl,tm2,ssse3,cx16,xtpr,pdcm,movbe>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                                          real memory  = 2147483648 (2048 MB)
                                          avail memory = 2086248448 (1989 MB)
                                          ACPI APIC Table: <011910 APIC1514>
                                          FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                                          FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
                                          cpu0 (BSP): APIC ID:  0
                                          cpu1 (AP/HT): APIC ID:  1
                                          cpu2 (AP): APIC ID:  2
                                          cpu3 (AP/HT): APIC ID:  3
                                          ioapic0: Changing APIC ID to 4
                                          ioapic0 <version 2.0="">irqs 0-23 on motherboard
                                          wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                                          wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (wpi_fw, 0xc08f7bc0, 0) error 1
                                          ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                                          ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0728440, 0) error 1
                                          ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                                          ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0728500, 0) error 1
                                          wlan: mac acl policy registered
                                          ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                                          ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                          module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07285c0, 0) error 1
                                          kbd1 at kbdmux0
                                          cryptosoft0: <software crypto="">on motherboard
                                          padlock0: No ACE support.
                                          acpi0: <smci>on motherboard
                                          acpi0: [ITHREAD]
                                          acpi0: Power Button (fixed)
                                          acpi0: reservation of fee00000, 1000 (3) failed
                                          acpi0: reservation of 0, a0000 (3) failed
                                          acpi0: reservation of 100000, 7ff00000 (3) failed
                                          Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                                          acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                                          cpu0: <acpi cpu="">on acpi0
                                          cpu1: <acpi cpu="">on acpi0
                                          cpu2: <acpi cpu="">on acpi0
                                          cpu3: <acpi cpu="">on acpi0
                                          acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                                          Timecounter "HPET" frequency 14318180 Hz quality 900
                                          pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                                          pci0: <acpi pci="" bus="">on pcib0
                                          uhci0: <intel 82801i="" (ich9)="" usb="" controller="">port 0xcc00-0xcc1f irq 16 at device 26.0 on pci0
                                          uhci0: [ITHREAD]
                                          uhci0: LegSup = 0x2f00
                                          usbus0: <intel 82801i="" (ich9)="" usb="" controller="">on uhci0
                                          uhci1: <intel 82801i="" (ich9)="" usb="" controller="">port 0xc880-0xc89f irq 21 at device 26.1 on pci0
                                          uhci1: [ITHREAD]
                                          uhci1: LegSup = 0x2f00
                                          usbus1: <intel 82801i="" (ich9)="" usb="" controller="">on uhci1
                                          uhci2: <intel 82801i="" (ich9)="" usb="" controller="">port 0xc800-0xc81f irq 19 at device 26.2 on pci0
                                          uhci2: [ITHREAD]
                                          uhci2: LegSup = 0x2f00
                                          usbus2: <intel 82801i="" (ich9)="" usb="" controller="">on uhci2
                                          ehci0: <intel 82801i="" (ich9)="" usb="" 2.0="" controller="">mem 0xfebfbc00-0xfebfbfff irq 18 at device 26.7 on pci0
                                          ehci0: [ITHREAD]
                                          usbus3: EHCI version 1.0
                                          usbus3: <intel 82801i="" (ich9)="" usb="" 2.0="" controller="">on ehci0
                                          pcib1: <acpi pci-pci="" bridge="">irq 17 at device 28.0 on pci0
                                          pci1: <acpi pci="" bus="">on pcib1
                                          pcib2: <acpi pci-pci="" bridge="">irq 17 at device 28.4 on pci0
                                          pci2: <acpi pci="" bus="">on pcib2
                                          em0: <intel(r) 1000="" pro="" network="" connection="" 6.9.14="">port 0xdc00-0xdc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 16 at device 0.0 on pci2
                                          em0: Using MSIX interrupts
                                          em0: [ITHREAD]
                                          em0: [ITHREAD]
                                          em0: [ITHREAD]
                                          pcib3: <acpi pci-pci="" bridge="">irq 16 at device 28.5 on pci0
                                          pci3: <acpi pci="" bus="">on pcib3
                                          em1: <intel(r) 1000="" pro="" network="" connection="" 6.9.14="">port 0xec00-0xec1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 17 at device 0.0 on pci3
                                          em1: Using MSIX interrupts
                                          em1: [ITHREAD]
                                          em1: [ITHREAD]
                                          em1: [ITHREAD]
                                          uhci3: <intel 82801i="" (ich9)="" usb="" controller="">port 0xc480-0xc49f irq 23 at device 29.0 on pci0
                                          uhci3: [ITHREAD]
                                          uhci3: LegSup = 0x2f00
                                          usbus4: <intel 82801i="" (ich9)="" usb="" controller="">on uhci3
                                          uhci4: <intel 82801i="" (ich9)="" usb="" controller="">port 0xc400-0xc41f irq 19 at device 29.1 on pci0
                                          uhci4: [ITHREAD]
                                          uhci4: LegSup = 0x2f00
                                          usbus5: <intel 82801i="" (ich9)="" usb="" controller="">on uhci4
                                          uhci5: <intel 82801i="" (ich9)="" usb="" controller="">port 0xc080-0xc09f irq 18 at device 29.2 on pci0
                                          uhci5: [ITHREAD]
                                          uhci5: LegSup = 0x2f00
                                          usbus6: <intel 82801i="" (ich9)="" usb="" controller="">on uhci5
                                          ehci1: <intel 82801i="" (ich9)="" usb="" 2.0="" controller="">mem 0xfebfb800-0xfebfbbff irq 23 at device 29.7 on pci0
                                          ehci1: [ITHREAD]
                                          usbus7: EHCI version 1.0
                                          usbus7: <intel 82801i="" (ich9)="" usb="" 2.0="" controller="">on ehci1
                                          pcib4: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                                          pci4: <acpi pci="" bus="">on pcib4
                                          vgapci0: <vga-compatible display="">mem 0xfc000000-0xfcffffff,0xfdffc000-0xfdffffff,0xfe000000-0xfe7fffff irq 17 at device 4.0 on pci4
                                          isab0: <pci-isa bridge="">at device 31.0 on pci0
                                          isa0: <isa bus="">on isab0
                                          atapci0: <intel ich9="" sata300="" controller="">port 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f,0xb400-0xb40f irq 19 at device 31.2 on pci0
                                          atapci0: [ITHREAD]
                                          ata2: <ata 0="" channel="">on atapci0
                                          ata2: [ITHREAD]
                                          ata3: <ata 1="" channel="">on atapci0
                                          ata3: [ITHREAD]
                                          pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
                                          atapci1: <intel ich9="" sata300="" controller="">port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 19 at device 31.5 on pci0
                                          atapci1: [ITHREAD]
                                          ata4: <ata 0="" channel="">on atapci1
                                          ata4: [ITHREAD]
                                          ata5: <ata 1="" channel="">on atapci1
                                          ata5: [ITHREAD]
                                          acpi_button0: <power button="">on acpi0
                                          atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
                                          uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                                          uart0: [FILTER]
                                          uart2: <16550 or compatible> port 0x3e8-0x3ef irq 4 on acpi0
                                          uart2: [FILTER]
                                          pmtimer0 on isa0
                                          orm0: <isa option="" rom="">at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
                                          sc0: <system console="">at flags 0x100 on isa0
                                          sc0: VGA <16 virtual consoles, flags=0x300>
                                          vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                                          ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
                                          ata0: [ITHREAD]
                                          ata1 at port 0x170-0x177,0x376 irq 15 on isa0
                                          ata1: [ITHREAD]
                                          atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                                          atkbd0: <at keyboard="">irq 1 on atkbdc0
                                          kbd0 at atkbd0
                                          atkbd0: [GIANT-LOCKED]
                                          atkbd0: [ITHREAD]
                                          ppc0: parallel port not found.
                                          p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                                          p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                                          p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
                                          p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
                                          Timecounters tick every 1.000 msec
                                          IPsec: Initialized Security Association Processing.
                                          usbus0: 12Mbps Full Speed USB v1.0
                                          usbus1: 12Mbps Full Speed USB v1.0
                                          usbus2: 12Mbps Full Speed USB v1.0
                                          usbus3: 480Mbps High Speed USB v2.0
                                          usbus4: 12Mbps Full Speed USB v1.0
                                          usbus5: 12Mbps Full Speed USB v1.0
                                          usbus6: 12Mbps Full Speed USB v1.0
                                          usbus7: 480Mbps High Speed USB v2.0
                                          ad4: 152627MB <seagate st9160314as="" 0001sdm1="">at ata2-master UDMA100 SATA 3Gb/s
                                          ugen0.1: <intel>at usbus0
                                          uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                                          ugen1.1: <intel>at usbus1
                                          uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                                          ugen2.1: <intel>at usbus2
                                          uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
                                          ugen3.1: <intel>at usbus3
                                          uhub3: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus3
                                          ugen4.1: <intel>at usbus4
                                          uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
                                          ugen5.1: <intel>at usbus5
                                          uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
                                          ugen6.1: <intel>at usbus6
                                          uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
                                          ugen7.1: <intel>at usbus7
                                          uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
                                          SMP: AP CPU #1 Launched!
                                          SMP: AP CPU #2 Launched!
                                          SMP: AP CPU #3 Launched!
                                          Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
                                          uhub0: 2 ports with 2 removable, self powered
                                          uhub1: 2 ports with 2 removable, self powered
                                          uhub2: 2 ports with 2 removable, self powered
                                          uhub4: 2 ports with 2 removable, self powered
                                          uhub5: 2 ports with 2 removable, self powered
                                          uhub6: 2 ports with 2 removable, self powered
                                          Root mount waiting for: usbus7 usbus3
                                          Root mount waiting for: usbus7 usbus3
                                          uhub3: 6 ports with 6 removable, self powered
                                          uhub7: 6 ports with 6 removable, self powered
                                          Root mount waiting for: usbus3
                                          Trying to mount root from ufs:/dev/ad4s1a
                                          ugen2.2: <winbond electronics="" corp="">at usbus2
                                          ums0: <winbond 0="" 2="" electronics="" corp="" hermon="" usb="" hidmouse="" device,="" class="" 0,="" rev="" 1.10="" 0.01,="" addr="">on usbus2
                                          ums0: 3 buttons and [Z] coordinates ID=0
                                          ugen0.2: <ituner inc="">at usbus0
                                          ukbd1: <winbond 0="" 2="" electronics="" corp="" hermon="" usb="" hidmouse="" device,="" class="" 0,="" rev="" 1.10="" 0.01,="" addr="">on usbus2
                                          kbd2 at ukbd1
                                          pflog0: promiscuous mode enabled
                                          tun1: changing name to 'ovpns1'
                                          tun2: changing name to 'ovpns2'
                                          ovpns2: link state changed to UP
                                          ovpns1: link state changed to UP
                                          em0: link state changed to UP
                                          em0: promiscuous mode enabled</winbond></ituner></winbond></winbond></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></seagate></cpu></cpu></cpu></cpu></at></keyboard></generic></system></isa></at></power></ata></ata></intel></serial></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel(r)></acpi></acpi></intel(r)></acpi></acpi></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></high></acpi></acpi></acpi></acpi></smci></software></version></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,tm2,ssse3,cx16,xtpr,pdcm,movbe></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

                                          1 Reply Last reply Reply Quote 0
                                          • C
                                            Cino
                                            last edited by

                                            @Skud:

                                            It's definitely a sweet little board. ICR9R, good Intel NICs, and I can verify that the PCIe x16 slot works with cards other than video. I have a PCIe x4 Intel PRO/1000 PT dual port card and pfSense sees it. I had to take it out though as I don't have a 90* PCIe adapter yet.

                                            Did you find a PCIe adapter yet?

                                            I'm using this case and need to find a 90 adapter also

                                            http://www.mini-box.com/Mini-Box-M300-LCD

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.