No automatic connect to ISP

nocer

Hello,

Thanks for your cleaner patch, I just wiped my DIY patchy and apply this, and I second that as jimp said so now willing this one to be committed anytime soon. And, mpd5 ROCKS!

cheers,

xbipin

can it be commited so i can also benefit from it using latest snapshots?

xbipin

or could some1 tell me what command to run in order to apply the patch directly in a nanobsd box?

jimp

You can do it on NanoBSD like so:

# /etc/rc.conf_mount_rw
 <fetch or="" scp="" the="" mpd5.txt="" file="" to="" box="" somehow=""># cd /
# patch -p1 < /root/mpd5.txt
# /etc/rc.conf_mount_ro</fetch>

Just make sure you are running a snap that includes the md5 binary before you do that.

xbipin

im on the 4th feb nanobsd , no idea how to check if mpd5 is there or no

jimp

@xbipin:

im on the 4th feb nanobsd , no idea how to check if mpd5 is there or no

Go to a shell and type:

# which mpd5
/usr/local/sbin/mpd5

If you get back that second line, you have it. Though that snapshot is probably too early, you'll need to update/reflash to a newer one.

xbipin

it says the exact line u mentioned but when i ran the below
/etc/rc.conf_mount_rw
through web interface, the web interface seemed to have died, tried restarting also but no effect, need to reboot the box.

jimp

Yeah, that should have been done from a shell, not the webgui. The Diagnostics > Command interface in the GUI automatically switches to rw/ro during execution.

nocer

hmmmmmmmmmm….it's not that difficult, first click & save ermal's patch somewhere on your local pc, then go grab shell from the console not from the webGUI, then follow jimp's instruction, it's only 3 minutes cook. have fun!

cheers,

ooops, you quick ;D

jimp

Typo? What typo? ;-)

xbipin

@jimp:

You can do it on NanoBSD like so:
# /etc/rc.conf_mount_rw
 <fetch or="" scp="" the="" mpd5.txt="" file="" to="" box="" somehow=""># cd /
# patch -p1 < /root/mpd5.txt
# /etc/rc.conf_mount_ro</fetch> 
Just make sure you are running a snap that includes the md5 binary before you do that.

this is what i get

[root@pfsense.pfsense]/(4): patch -p1 < /root/mpd5.txt
Hmm… Looks like a unified diff to me...
The text leading up to this was:

|diff --git a/etc/inc/interfaces.inc b/etc/inc/interfaces.inc
|index 54808a6..f4bd81e 100644
|--- a/etc/inc/interfaces.inc

+++ b/etc/inc/interfaces.inc
Patching file etc/inc/interfaces.inc using Plan A...
Hunk #1 failed at 2011.
Hunk #2 failed at 2044.
Hunk #3 failed at 2070.
Hunk #4 failed at 2081.
Hunk #5 failed at 2092.
Hunk #6 failed at 2108.
6 out of 6 hunks failed--saving rejects to etc/inc/interfaces.inc.rej
done

Rich0x

Hi guys,

Just to clear up, which file on this mirror http://mirror.optus.net/pub/pfSense/downloads/ Should i install to resolve this issue?

Cheers

Rich0x

@xbipin:

@jimp:
You can do it on NanoBSD like so:
# /etc/rc.conf_mount_rw
 <fetch or="" scp="" the="" mpd5.txt="" file="" to="" box="" somehow=""># cd /
# patch -p1 < /root/mpd5.txt
# /etc/rc.conf_mount_ro</fetch> 
Just make sure you are running a snap that includes the md5 binary before you do that.
this is what i get

[root@pfsense.pfsense]/(4): patch -p1 < /root/mpd5.txt
Hmm… Looks like a unified diff to me...
The text leading up to this was:

|diff --git a/etc/inc/interfaces.inc b/etc/inc/interfaces.inc
|index 54808a6..f4bd81e 100644
|--- a/etc/inc/interfaces.inc

+++ b/etc/inc/interfaces.inc

Patching file etc/inc/interfaces.inc using Plan A...

Hunk #1 failed at 2011.

Hunk #2 failed at 2044.

Hunk #3 failed at 2070.

Hunk #4 failed at 2081.

Hunk #5 failed at 2092.

Hunk #6 failed at 2108.

6 out of 6 hunks failed--saving rejects to etc/inc/interfaces.inc.rej

done

Yeah i get the same thing too.

_igor_

Tried the patch with snap from Sun Mar 7 00:22:39 EST, but got errors:

patch -p1 < /root/mpd5.txt
Hmm… Looks like a unified diff to me...
The text leading up to this was:

|diff --git a/etc/inc/interfaces.inc b/etc/inc/interfaces.inc
|index 54808a6..f4bd81e 100644
|--- a/etc/inc/interfaces.inc

+++ b/etc/inc/interfaces.inc
Patching file etc/inc/interfaces.inc using Plan A...
Hunk #1 succeeded at 2011 with fuzz 2.
Hunk #2 succeeded at 2044.
Hunk #3 failed at 2070.
Hunk #4 failed at 2081.
Hunk #5 succeeded at 2092.
Hunk #6 succeeded at 2108.
2 out of 6 hunks failed--saving rejects to etc/inc/interfaces.inc.rej
done

Think I'm too late...
cat /etc/inc/interfaces.inc.rej

*** 2052,2057 ****
set link no acfcomp protocomp
set link disable pap chap
set link accept chap

EOD;
if (empty($wancfg['mtu']))
–- 2070,2077 ----
set link no acfcomp protocomp
set link disable pap chap
set link accept chap

set pppoe iface {$wancfg['if']}
set pppoe service "{$wancfg['provider']}"

EOD;
if (empty($wancfg['mtu']))

*** 2061,2085 ****

$mpdconf .= <<<eod set link mtu {$mpdmtu}

set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0

EOD;

if (isset($config['system']['dnsallowoverride'])) {
$mpdconf .= <<<eod - set ipcp enable req-pri-dns
EOD;
}
if (!isset($wancfg['dnsnosec']) && isset($config['system']['dnsallowoverride'])) {
$mpdconf .= <<<eod - set ipcp enable req-sec-dns
EOD;
}

$mpdconf .= <<<eod open

–- 2081,2089 ----

$mpdconf .= <<<eod set link mtu {$mpdmtu}

EOD;

$mpdconf .= <<<eod open

#</eod </eod </eod </eod </eod </eod

xbipin

a simple solution would be if some1 could simply upload the interfaces.inc file after the patch applied so everyone else could simply replace the existing file with it to test the new patch.

Rich0x

I've just re-installed to pfSense-1.2.3-RELEASE-LiveCD-Installer.iso.gz and this does not contain MPD5 as far as i can tell. Running the command 'which mdp5' results in 'mpd5: Command not found'.

'which mpd' works though, /usr/local/sbin/mpd

Now that I am running on a different version, I'll see how it goes with the auto-reconnect and general connection stability.

My DSL condition is below:

–- DSL Information ---
DSL Driver Version: AnnexA version - A2pB022g.d20e
DSL VPI/VCI: 8/35
DSL Status: ShowtimeRetrain Reason: 0
DSL Mode: ADSL2+
DSL Channel: FAST
DSL Upstream Rate: 1023 Kbps
DSL Downstream Rate: 12470 Kbps

Down up
DSL Noise Margin: 11.1 dB 13.9 dB
DSL Attenuation: 31.0 dB 19.1 dB
DSL Transmit Power: 18.7 dBm 12.6 dBm

jimp

@Rich0x:

I've just re-installed to pfSense-1.2.3-RELEASE-LiveCD-Installer.iso.gz and this does not contain MPD5 as far as i can tell. Running the command 'which mdp5' results in 'mpd5: Command not found'.

This thread is for pfSense 2.0 beta (it's in the 2.0 board, even) - it will not work on 1.2.3.

Rich0x

@jimp:

@Rich0x:

I've just re-installed to pfSense-1.2.3-RELEASE-LiveCD-Installer.iso.gz and this does not contain MPD5 as far as i can tell. Running the command 'which mdp5' results in 'mpd5: Command not found'.

This thread is for pfSense 2.0 beta (it's in the 2.0 board, even) - it will not work on 1.2.3.

I understand - Sorry about that, however if the auto-connect feature works correctly on the version I have installed, I will be happy to stick to that.

xbipin

hi Jimp,

could u paste the contents of the interface.inc file after the patch so i can simply edit the file?

Regards

jimp

I suppose I could put it somewhere but the patch still applies cleanly on today's snapshot – I'm not sure why people are having any problems with it.

[2.0-BETA1]
[root@tester.local]/root(1): cd /
[2.0-BETA1]
[root@tester.local]/(2): patch -p1 < root/mpd5.diff 
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|diff --git a/etc/inc/interfaces.inc b/etc/inc/interfaces.inc
|index 54808a6..f4bd81e 100644
|--- a/etc/inc/interfaces.inc
|+++ b/etc/inc/interfaces.inc
--------------------------
Patching file etc/inc/interfaces.inc using Plan A...
Hunk #1 succeeded at 2030 (offset 19 lines).
Hunk #2 succeeded at 2063 (offset 19 lines).
Hunk #3 succeeded at 2089 (offset 19 lines).
Hunk #4 succeeded at 2100 (offset 19 lines).
Hunk #5 succeeded at 2111 (offset 19 lines).
Hunk #6 succeeded at 2127 (offset 19 lines).
Hmm...  Ignoring the trailing garbage.
done
[2.0-BETA1]
[root@tester.local]/(3): uname -a
FreeBSD tester.local 8.0-STABLE FreeBSD 8.0-STABLE #1: Mon Mar  8 02:04:41 EST 2010     sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8  i386

Here is my copy:

mv /etc/inc/interfaces.inc /etc/inc/interfaces.inc.old
fetch -o /etc/inc/interfaces.inc http://pingle.org/files/interfaces.inc.txt

No automatic connect to ISP

[root@pfsense.pfsense]/(4): patch -p1 < /root/mpd5.txt Hmm… Looks like a unified diff to me... The text leading up to this was:

[root@pfsense.pfsense]/(4): patch -p1 < /root/mpd5.txt Hmm… Looks like a unified diff to me... The text leading up to this was:

patch -p1 < /root/mpd5.txt Hmm… Looks like a unified diff to me... The text leading up to this was:

[root@pfsense.pfsense]/(4): patch -p1 < /root/mpd5.txt
Hmm… Looks like a unified diff to me...
The text leading up to this was:

[root@pfsense.pfsense]/(4): patch -p1 < /root/mpd5.txt
Hmm… Looks like a unified diff to me...
The text leading up to this was:

patch -p1 < /root/mpd5.txt
Hmm… Looks like a unified diff to me...
The text leading up to this was: