Multi WAN Setup Guide
-
Dear all,
This is what i want to setup,
ISP 1 ISP 2
| |
| Linksys Router (PPOE)
| 192.168.2.1
|–----------------FAILOver---------------|
PFSense
WAN 1 (PPOE) WAN 2 (OPT)
ip:203.118.28.x --------- Switch------------ip:192.168.2.5
gw:203.118.34.1 gw:192.168.2.1
| |
| |
LAN 1 LAN 2
ip:192.168.1.x/24 ip:192.168.2.x/24
gw:192.168.1.1 gw:192.168.2.1(The reason we serpated Linksys router to ISP 2 because, we want to use ISP 2 for skype dedicated link)
The problem is I could not able to ping from LAN 1 to LAN 2.
are there any solutions for this setup?
Thanks
-
Dear leap,
You need routing between the 2 lans. If your switch is not a layer 3 one, so do it with pfsense.
i.e if the lan ip addrerss of pfsense is 192.168.1.1, so add a new route to 192.168.2.0. -
Dear Marito
Thanks for your replied. I already added. but no luck. still not able to access Lan2.
This is the route table
Destination GW
LAN 192.168.2.0/24 192.168.1.10Any idea
-
Dear Marito
Thanks for your replied. I already added. but no luck. still not able to access Lan2.
This is the route table
Destination GW
LAN 192.168.2.0/24 192.168.1.10Any idea
Pardon me but did you add the rule that will enable LAN1 to access LAN2?
-
You're causing routing complications with that kind of a setup. Put LAN2 off of another interface on pfSense, and leave WAN2 connected to the Linksys (but change the subnet if you want to leave LAN2 as is).