Snort-dev has been released. old snort has been renamed snort-old

tester_02

Bad day so far. I thought this would be easy install from the last dev to the release. I uninstalled the last dev release and rebooted (I always like a clean boot). Then pfsense (1.2.3)failed to respond. I am guessing squid/squidguard, although I did notice the webconfigurator failed to start.
I could not browse into the pfsense box, but I could ssh in.
I needed it back in a hurry and after 30 minutes I could not figure it out. So fresh install and restore and I am back up and running. Maybe the next machine I'll skip the reboot process :)
Just my warning….

netmethods

tester_02

It might've been easier to just reinstall the upgrade from ssh so you didn't have to reconfigure. This happened to me a little bit ago, but wasn't snort related.

-J

tester_02

I remember some posts on how to do it, but I could not get on the net easily and browse here to find the commands to do it. It was easier to install and import config than to get on the net to find out how. freebsd newb here.

Got a new reinstall down to 1/2 hour with everything back to normal. Good thing I've remembered to export any changes :)

vito

Hi JamesDean,
I just did an upgrade from what was "old-Snort" to the latest version.
In the some where during the upgrade i got this error

Fatal error: Cannot redeclare sync_package_snort_reinstall() (previously declared in /usr/local/pkg/snort.inc:46) in /usr/local/pkg/snort/snort.inc on line 323

The upgrade froze, so i did the upgrade again and it seemed to install ok.

I need to reset up Snort at this point so i do not have any useful feed back yet
But i do have a GUI issue See screen shot
Thanks for your help

running PF 1.2.3 FULL
tested on FF3.6.2 and IE 8

![4-1-2010 10-11-57 PM.png](/public/imported_attachments/1/4-1-2010 10-11-57 PM.png)
![4-1-2010 10-11-57 PM.png_thumb](/public/imported_attachments/1/4-1-2010 10-11-57 PM.png_thumb)
![4-1-2010 10-12-57 PM.png](/public/imported_attachments/1/4-1-2010 10-12-57 PM.png)
![4-1-2010 10-12-57 PM.png_thumb](/public/imported_attachments/1/4-1-2010 10-12-57 PM.png_thumb)

netmethods

Just tried to run the update manually and it seems to stuck on clean up process.

When checking the logs, I see this twice:
snort[45846]: Could not remove pid file /var/run//snort_em19121_em1.pid: Permission denied

I'm guessing this has something to do with the snort account permissions on the files/folder? Unfortunately, I'm still fairly new to using the CLI on FreeBSD and Linux, etc and not sure how to fix this.

simby

@tester_02:

Bad day so far. I thought this would be easy install from the last dev to the release. I uninstalled the last dev release and rebooted (I always like a clean boot). Then pfsense (1.2.3)failed to respond. I am guessing squid/squidguard, although I did notice the webconfigurator failed to start.
I could not browse into the pfsense box, but I could ssh in.
I needed it back in a hurry and after 30 minutes I could not figure it out. So fresh install and restore and I am back up and running. Maybe the next machine I'll skip the reboot process :)
Just my warning….

I have the same problem!! Fresh install :)

jamesdean

@netmethods:

Just tried to run the update manually and it seems to stuck on clean up process.

When checking the logs, I see this twice:
snort[45846]: Could not remove pid file /var/run//snort_em19121_em1.pid: Permission denied

I'm guessing this has something to do with the snort account permissions on the files/folder? Unfortunately, I'm still fairly new to using the CLI on FreeBSD and Linux, etc and not sure how to fix this.

One low end systems cleanup may take a few minutes.
"snort_em19121_em1.pid" has nothing to do with updates.

I'll review the code but its working for me on firefox.

Maybe its a IE thing I have to workout.

Are you on nanobsd ?

What browser and pfsense version are you using ?

james

jamesdean

@simby:

@tester_02:

Bad day so far. I thought this would be easy install from the last dev to the release. I uninstalled the last dev release and rebooted (I always like a clean boot). Then pfsense (1.2.3)failed to respond. I am guessing squid/squidguard, although I did notice the webconfigurator failed to start.
I could not browse into the pfsense box, but I could ssh in.
I needed it back in a hurry and after 30 minutes I could not figure it out. So fresh install and restore and I am back up and running. Maybe the next machine I'll skip the reboot process :)
Just my warning….

I have the same problem!! Fresh install :)

I think I know whats wrong. I am unistalling mysql and perl. I fix it in a bit.

James

ColdFusion

Anyone else missing the rules category Tab?…...All other Tabs are there including rules update and downloaded rules went ok.
Ver. 2.8.5.3 pkg v. 1.19

vito

@ColdFusion:

Anyone else missing the rules category Tab?…...All other Tabs are there including rules update and downloaded rules went ok.
Ver. 2.8.5.3 pkg v. 1.19

This is the first time i am using the new package, so i am not sure if it should be somewhere else…
But i do have a category tab on the interface

jamesdean

@vito:

@ColdFusion:

Anyone else missing the rules category Tab?…...All other Tabs are there including rules update and downloaded rules went ok.
Ver. 2.8.5.3 pkg v. 1.19

This is the first time i am using the new package, so i am not sure if it should be somewhere else…
But i do have a category tab on the interface

@anyone having troubles with the new package
Tracked the problems to the old-snort.
Seems old-snort is not uninstalling completely and is conflicting with the new install.
Do a fresh install, sorry I didn't see this coming.

James

netmethods

RE:
One low end systems cleanup may take a few minutes.
"snort_em19121_em1.pid" has nothing to do with updates.

I'll review the code but its working for me on firefox.

Maybe its a IE thing I have to workout.

Are you on nanobsd ?

What browser and pfsense version are you using ?

james

It's not a low end system, quad core, 4gb, etc. I'm using the latest version firefox (although I might've been on my mac at the time) with 1.2.3-RELEASE (not nanobsd). I refreshed the browser and everything looks ok. Restarted snort and it came up ok. Looks like it's running ok, so probably nothing.

lightenup

I found two issues after performing a fresh install of 1.2.3-Release. First logging to mysql database does not look to be functioning properly. The configuration looks to be going into place but I never see any connection attempts to the mysql server.

Syslog output from barnyard2:

resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: database: host = 10.1.1.5
resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: database: host = 10.1.1.5
resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: ===============================================================================
resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: ===============================================================================
resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: database: user = snort
resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: database: user = snort
resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: Record Totals:
resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: Record Totals:
resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: database: database name = snort
resistance.quantum.local daemon 10:42:27 barnyard2 barnyard2[41812]: database: database name = snort

I ran a TCPdump at the time of snort starting up and I see it make an initial connection to the mysql server, I took at look at the database and it updates its sensor name and interface info however when alerts are generated by snort there is no updates sent to the database.

Second, this is a minor issue, in the system.log everything from snort and barnyard2 is logging twice at startup, as you can see above. I think the old version may have done this too.

Another feature that I liked in the old version was the ability to add in custom commands. In my syslogs I liked snort alerts to show up as warnings ie. <configpassthru>output alert_syslog: log_warning</configpassthru> (by default they are sent as alert).

LiGHT

grandrivers

james when you have time,

I tried to define some servers and on saving I get the following error

snort release pf 2.0 April 3 windows 7 ff3.6.3

Warning: touch(): Unable to create file because No such file or directory in /usr/local/www/snort/snort_define_servers.php on line 215 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 217 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 218 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 219 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 220 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 221 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 224

joukahainen

@jamesdean:

@anyone having troubles with the new package
Tracked the problems to the old-snort.
Seems old-snort is not uninstalling completely and is conflicting with the new install.
Do a fresh install, sorry I didn't see this coming.

James

Hi and thanks for your great work with Snort.

Is there any way for doing this without doing full fresh install of Pfsense? I am using 1.2.3 release of Pfsense, and stuck with Snort 2.8.4.1_5 pkg v. 1.7. The new version just wont start (conflicting with the old-snort leftovers).

A Former User

Does this new version of snort work in Pfsense 2.0 beta .I would like to test it but the last time i did that i could not get snort to run at all .

expert_az

Hello jamesdean,

First of all thank you for your great job,

I have installed new snort package with success,i did all my conf and update,now lan interface working well,but when i stared my wan interface i received following errors on system logs

Apr 5 09:34:32 SnortStartup[9193]: Interface Rule START for 0_39767_ng0…
Apr 5 09:34:32 snort[9191]: FATAL ERROR: Unable to open rules file "/usr/local/etc/snort/snort_39767_ng0/snort.conf": Not a directory.
Apr 5 09:34:32 snort[9191]: FATAL ERROR: Unable to open rules file "/usr/local/etc/snort/snort_39767_ng0/snort.conf": Not a directory.
Apr 5 09:34:32 snort[9191]: Parsing Rules file "/usr/local/etc/snort/snort_39767_ng0/snort.conf"
Apr 5 09:34:32 snort[9191]: Parsing Rules file "/usr/local/etc/snort/snort_39767_ng0/snort.conf"

any idea?

regards

expert_az

my pf version is 1.2.3 stable

g4m3c4ck

Probably wrong thread but I am in a big hurry. Just tried to add some defined servers after reinstalling to the newest snort on 1.2.3 release.

Warning: touch(): Unable to create file because No such file or directory in /usr/local/www/snort/snort_define_servers.php on line 215 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 217 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 218 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 219 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 220 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 221 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/www/snort/snort_define_servers.php:215) in /usr/local/www/snort/snort_define_servers.php on line 224

Just an fyi

Looks like it is holding its settings though…. Also is it normal for Dashboard and Status:Services to say the service is stopped even though on the Snort Interfaces Panel I get a green arrow?

g4m3c4ck

nope not working.

uninstalled, and reinstalled will try more later…

Apr 5 09:41:56	SnortStartup[1633]: Interface Rule START for 0_65478_vlan0...
Apr 5 09:41:56	snort[1631]: FATAL ERROR: Invalid pidfile suffix: 65478_vlan0\. Suffix must less than 11 characters and not have ".." or "/" in the name.
Apr 5 09:41:56	snort[1631]: FATAL ERROR: Invalid pidfile suffix: 65478_vlan0\. Suffix must less than 11 characters and not have ".." or "/" in the name.
Apr 5 09:41:56	SnortStartup[1561]: Toggle for 65478_vlan0...
Apr 5 09:41:23	SnortStartup[1160]: Error: snort.sh IS running
Apr 5 09:38:32	kernel: msk0: watchdog timeout (missed Tx interrupts) -- recovering
Apr 5 09:25:50	php: /pkg_mgr_install.php: Beginning package installation for snort.
Apr 5 09:24:36	php: /pkg_mgr_install.php: cd /var/db/pkg && pkg_delete ls | grep snort
Apr 5 09:24:36	php: /pkg_mgr_install.php: cd /var/db/pkg && pkg_delete ls | grep
Apr 5 09:22:35	php: /pkg_mgr_install.php: Beginning package installation for snort.
Apr 5 08:59:04	dnsmasq[908]: reading /var/dhcpd/var/db/dhcpd.leases
Apr 5 08:46:42	dnsmasq[908]: reading /var/dhcpd/var/db/dhcpd.leases
Apr 5 08:46:12	SnortStartup[49241]: Error: snort.sh IS running
Apr 5 08:11:09	php: /pkg_mgr_install.php: Beginning package installation for snort.
Apr 5 08:06:42	php: /pkg_mgr_install.php: Beginning package installation for snort.
Apr 5 08:05:56	snort[2149]: Snort exiting
Apr 5 08:05:56	snort[2149]: Snort exiting