Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Subnet to subnet routing

    Routing and Multi WAN
    2
    17
    8.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • GruensFroeschliG
      GruensFroeschli
      last edited by

      Create a static route on your AP pointing to 192.168.1.254 for 192.168.5.0/24

      We do what we must, because we can.

      Asking questions the smart way: http://www.catb.org/esr/faqs/smart-questions.html

      1 Reply Last reply Reply Quote 0
      • D
        diretore
        last edited by

        Like I said… I am using RIP on both routers (pfSense and the AP)
        And routing tables show the routes exist. I am guessing this is a firewall problem...

        1 Reply Last reply Reply Quote 0
        • GruensFroeschliG
          GruensFroeschli
          last edited by

          How does your any-any rule look like?
          Are you allowing TCP/UDP or "any" as protocol?
          If you are pinging: Do you have ICMP allowed?

          We do what we must, because we can.

          Asking questions the smart way: http://www.catb.org/esr/faqs/smart-questions.html

          1 Reply Last reply Reply Quote 0
          • D
            diretore
            last edited by

            For OPT1: alow any any coming in interface opt1
            for LAN: alow any any coming in from OPT1 subnet (191.168.1.0/24)

            I disabled RIP and added a static route to the AP router.

            Maybe I'm doing smth wrong. What exactly does my firewall rule must look like?

            1 Reply Last reply Reply Quote 0
            • D
              diretore
              last edited by

              Nothing?

              Here is a (very bad) picture of the setup for better understanding:

              The goal is to enable network communication between OPT1 clients and LAN clients.
              PfSense is in the multiwan setup and load balancing/fail-over for LAN clients work flawlessly

              setup.jpg
              setup.jpg_thumb

              1 Reply Last reply Reply Quote 0
              • GruensFroeschliG
                GruensFroeschli
                last edited by

                Ok now i know the whole setup.
                The key-missing information for me was that the AP is used as WAN for the pfSense as well and you're loadbalancing the LAN.

                You need on the LAN above the loadbalancing-rule another rule allowing access to the AP for the additional subnet.
                The gateway for this rule above the balancing rule has to be default (*).

                So LAN:
                Rule1: protocol: any, source: LAN-subnet, srcport: any, destination: AP-subnet, destport: any, gateway: default
                Rule2: protocol: any, source: LAN-subnet, srcport: any, destination: any, destport: any, gateway: balancer

                OPT:
                Rule1: protocol: any, source: AP-subnet, srcport: any, destination: LAN-subnet, destport: any, gateway: default

                We do what we must, because we can.

                Asking questions the smart way: http://www.catb.org/esr/faqs/smart-questions.html

                1 Reply Last reply Reply Quote 0
                • D
                  diretore
                  last edited by

                  Thank you!

                  Will try that and report back!

                  1 Reply Last reply Reply Quote 0
                  • D
                    diretore
                    last edited by

                    Just to be sure…
                    on the AP router I have to configure a static route to the network 192.168.5.0/24 using the gateway 192.168.1.254 (the ip of my pfsense interface)?

                    Because I did that and still nothing. Ping times out...

                    1 Reply Last reply Reply Quote 0
                    • GruensFroeschliG
                      GruensFroeschli
                      last edited by

                      Yes your static route should look the way you describe.

                      Did you debug this step by step?
                      1: Can you ping 192.168.1.254.
                      2: If 1 was yes: if you ping 192.168.5.1 (pfSense IP on it's LAN), do you see this logged in the pfSense firewall-log?
                      3: Enable logging for the allow-rule. If the packet is getting to the pfSense it should show either allowed or blocked up.
                      4: If this you cannot see it in the firewall log: did you TCP-dump on the pinging machine to see how the ARP-requests get answered? where the packets are actually sent to?

                      We do what we must, because we can.

                      Asking questions the smart way: http://www.catb.org/esr/faqs/smart-questions.html

                      1 Reply Last reply Reply Quote 0
                      • D
                        diretore
                        last edited by

                        1. yes. pinging 192.168.1.254 works
                        2. no. ping times out
                        3. allow rule displays like this: 192.168.1.100:54675 192.168.1.254:2189 TCP:S (on the opt1 interface)
                        also get this in the log :192.168.1.100:58840 239.255.255.250:1900 UDP (uPnP this is ok, I will allow it)
                        4. when pinging 192.168.5.5 (a machine on my 192.168.5.0 subnet) i get:

                        From 192.168.1.1: icmp_seq=2 Redirect Host (new nexthop:192.168.1.254) so I'm guessing the AP router actually knows where to send the packets.  
                        The weird thing is it just stands there (no host unreachable or timeout errors) Cursor just blinks and nothing happens (using ubuntu 9 here)
                        EDIT: after some time (minutes) i get: network unreachable

                        Also tried manually adding route using the route add command (on another windows 7 client). No luck….

                        loosing my mind here...

                        EDIT:
                        nmap output:
                        ddwrt router:

                        Not shown: 997 closed ports
                        PORT STATE SERVICE
                        23/tcp open telnet
                        53/tcp open domain
                        80/tcp open http
                        MAC Address: 00:25:9C:CF:BA:9D (Cisco-Linksys)

                        opt1 interface:

                        Interesting ports on 192.168.1.254:
                        Not shown: 996 filtered ports
                        PORT STATE SERVICE
                        53/tcp open domain
                        80/tcp open http
                        443/tcp open https
                        1723/tcp open pptp
                        MAC Address: 00:25:9C:CF:BA:9D (Cisco-Linksys)

                        as shown the MAC addresses are the same for 2 different IP addresses but I am assuming this doesn't matter

                        1 Reply Last reply Reply Quote 0
                        • GruensFroeschliG
                          GruensFroeschli
                          last edited by

                          Not sure i read that right.
                          Are you telling that the MAC of the pfSense and of the AP are the same?
                          This matters very much.
                          You cannot resolve ARP requests like this.

                          We do what we must, because we can.

                          Asking questions the smart way: http://www.catb.org/esr/faqs/smart-questions.html

                          1 Reply Last reply Reply Quote 0
                          • D
                            diretore
                            last edited by

                            no, no…

                            pfsense box->ddwrt router->AP

                            pfsense box and ddwrt router have same MAC. AP has another.

                            Talking about client bridge mode here.... something like this:

                            http://www.dd-wrt.com/wiki/index.php/Image:Standard_bridge_large.jpg

                            1 Reply Last reply Reply Quote 0
                            • GruensFroeschliG
                              GruensFroeschli
                              last edited by

                              Well if you connect the pfSense box to the ddwrt box and both have the same MAC on the interfaces to each other they are not able to talk.
                              First they do an ARP lookup and find out that they have this MAC themself
                              –> Traffic never gets sent out.

                              Try to set a different MAC for both devices and they should be able to talk to each other.

                              We do what we must, because we can.

                              Asking questions the smart way: http://www.catb.org/esr/faqs/smart-questions.html

                              1 Reply Last reply Reply Quote 0
                              • D
                                diretore
                                last edited by

                                ok.. some of the logs of my opt1 interface:
                                Apr 7 16:35:44   opt1   192.168.1.102:51072   192.168.1.254:53   UDP
                                Apr 7 16:35:44 opt1 192.168.1.102:58188 192.168.1.253:53 UDP
                                Apr 7 16:35:44 opt1 192.168.1.102:53841 192.168.1.254:53 UDP
                                Apr 7 16:35:44 opt1 192.168.1.102:59647 192.168.1.254:53 UDP

                                Obviously DNS queries. So i can confirm the packets reach OPT1 interface. If I enable vpn, the 192.168.1.0/24 clients actually can connect to my 192.168.5.0/24 clients (thru vpn but slow as hell)

                                Problem is that… well packets are not routed between subnets... Smth is wrong in my pfsense config....

                                1 Reply Last reply Reply Quote 0
                                • First post
                                  Last post
                                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.