FTP outgoing from FreeBSD broken when Windows works = FIXED/WORKAROUND
-
I've seen it asked once or twice but never encountered the problem before until today when I set up the pfSense firewall to allow users to do outgoing ftp and it wasn't working. This would keep many of the maintenance features of FreeBSD not working which would cause huge amounts of work for me. Strangely, the Windows ftp client was working in passive mode so I began digging around…
It seems that the default client on FreeBSD and probably others is set to use epsv4 (extended passive mode) and that doesn't work with the default install of pfSense. Oh sure, it may be nice if pfSense supported epsv4 but really it's not necessarily needed and there's an easy workaround.
Add the following to your .netrc file and it should start working again for you:
default login anonymous password someone@somewhere.com macdef
init
passive
epsv4 offThat's all it took for me and now my ftp on my freebsd box is working just fine.
Regards,
WHUPDATE: I found a simpler way of getting this to work just fine:
Disable the ftp-proxy on the LAN side
Enable the ftp-proxy on the WAN sideIt seems that when the proxy rules for both sides were enabled the packets were getting dropped on the LAN side for some reason. It works now and I don't necessarily need to understand the whole reason why. However, if you try both of these and still have a problem, maybe I can help out.