2.0 NanoBSD : any known working version regarding upgrades?

xbipin

did u mean to say which snapshot onwards upgrade works on nanobsd?
if so then it started march onwards

and if ur looking for the best nanobsd upgrade snapshot then consider 1th april and u can upgrade from any older nanobsd to 11th april nanobsd upgrade snap without any issue, atleast for me and once on 11th april snap, it works smooth

mgaudette

I just tried upgrading from April 12th to April 21 using the "upload firmware" screen. On NanoBSD 2G version.

I can't say whether it's working because right now my Mozilla screen is still on the "upgrade screen", my serial console tells me there hasn't been a reboot and the file has been transferred about 20 minutes ago. (could tell from my PC's network utilization).

How long should I wait before calling this a problem?

xbipin

once upgrade starts, u will see it in the console and once its done successfully, its suppose to reboot

mgaudette

Ok, well there you go. I gave up, used the console, and upgraded "using URL". Everything seems fine, until it reboots to the good old version.

See console log:

Enter the URL to the .tgz update file:

http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_HEAD/nanobsd/pfSense-2.0-BETA1-2g-20100421-0506-nanobsd.img.gz

Fetching file size…

File size: 166627341

Fetching file...
looking up snapshots.pfsense.org
connecting to snapshots.pfsense.org:80
requesting http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_HEAD/nanobsd/pfSense-2.0-BETA1-2g-20100421-0506-nanobsd.img.gz
remote size / mtime: 166627341 / 1271841173
/root/firmware.tgz 100% of 158 MB 996 kBps 00m00s

Fetching MD5...
looking up snapshots.pfsense.org
connecting to snapshots.pfsense.org:80
requesting http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_HEAD/nanobsd/pfSense-2.0-BETA1-2g-20100421-0506-nanobsd.img.gz.md5
remote size / mtime: 112 / 1271841679
/root/firmware.tgz.md5 100% of 112 B 178 kBps
URL MD5: 99f5a28e4ad255b1798670ebbb8e534e

Downloaded file MD5: 99f5a28e4ad255b1798670ebbb8e534e

MD5 checksum matches.
NanoBSD upgrade file detected...

WARNING! ACHTUNG! DANGER!

This image is not digitally signed.

This means that the image you uploaded is not an official/supported image and
may lead to unexpected behavior or security compromises.

Only install images that come from sources that you trust, and make sure
that the image has not been tampered with.

Do you want to install this image anyway at your own risk [n]?y

Continuing upgrade…

One moment please...

Broadcast Message from root@pfsense.localdomain
(no tty) at 12:06 EDT...

Firmware upgrade in progress...

..Done. Rebooting...

*** Welcome to pfSense 2.0-BETA1-nanobsd on pfsense ***

WAN (wan) -> vr1 -> SOMETHING
LAN (lan) -> vr0 -> 192.168.1.1
OPT1 (opt1) -> vr2 -> NONE

pfSense console setup

0) Logout (SSH only)
1) Assign Interfaces
2) Set interface(s) IP address
3) Reset webConfigurator password
4) Reset to factory defaults
5) Reboot system
6) Halt system
7) Ping host
8) Shell
9) PFtop
10) Filter Logs
11) Restart webConfigurator
12) pfSense Developer Shell
13) Upgrade from console
14) Enable Secure Shell (sshd)

Enter an option:
*** FINAL System shutdown message from root@pfsense.localdomain ***
System going down IMMEDIATELY

pfSense is now shutting down ...

Waiting (max 60 seconds) for system process vnlru' to stop...done Waiting (max 60 seconds) for system process bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Uptime: 4m7s
Rebooting...
PC Engines ALIX.2 v0.99h
640 KB Base Memory
261120 KB Extended Memory

01F0 Master 848A SanDisk SDCFH-002G
Phys C/H/S 3897/16/63 Log C/H/S 974/64/63

1 pfSense
2 pfSense

F6 PXE
Boot: 2
/boot.config: -h
Consoles: serial port
BIOS drive C: is disk0
BIOS 640kB/261120kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(ermal@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org, Mon Apr 12 18:33:08 EDT 2010)
…..

What am I doing wrong? Seems simple enough p upgrade, and I seem to be the only one seeing this.

xbipin

thats bcoz u didnt use the nanobsd upgrade images

xbipin

u need to upgrade using the nanobsd upgrade images from this location
http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_HEAD/updates/

mgaudette

Ok, that sort of makes sense. So, just for my own education, whats the conceptual difference between an upgrade image and the original "install" image?

xbipin

for that only the developers might be able to give u a clear difference but what i know is u need to use the upgrade images to upgrade as the difference might be something related to the slices

mgaudette

Doesnt seem to be working with the Update files. I get this in my upgrade log (NanoBSD page in pfSense).

I have a 2GB CF card, and am using the 2GB update file now.

File list:

Warning: file_get_contents(/conf/file_upgrade_log.txt): failed to open stream: No such file or directory in /usr/local/www/diag_nanobsd.php on line 272

Misc log:

tar: Unrecognized archive format
tar: Error exit delayed from previous errors.
shutdown: [pid 5964]

fdisk/bsdlabel log:

I am at a loss, all I want is to get on the train and be able to update when needed. This is my console log from the update:
Enter the URL to the .tgz update file:

http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_HEAD/updates/pfSense-2.0-BETA1-2g-20100421-0506-nanobsd-upgrade.img.gz

Fetching file size…

File size: 83266369

Fetching file...
looking up snapshots.pfsense.org
connecting to snapshots.pfsense.org:80
requesting http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_HEAD/updates/pfSense-2.0-BETA1-2g-20100421-0506-nanobsd-upgrade.img.gz
remote size / mtime: 83266369 / 1271841368
/root/firmware.tgz 100% of 79 MB 937 kBps 00m00s

Fetching MD5...
looking up snapshots.pfsense.org
connecting to snapshots.pfsense.org:80
requesting http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_HEAD/updates/pfSense-2.0-BETA1-2g-20100421-0506-nanobsd-upgrade.img.gz.md5
remote size / mtime: 127 / 1271841681
/root/firmware.tgz.md5 100% of 127 B 199 kBps
URL MD5: 3dffbcd9f16f45c6d4a42e87653eb4eb

Downloaded file MD5: 3dffbcd9f16f45c6d4a42e87653eb4eb

MD5 checksum matches.
NanoBSD upgrade file detected...

WARNING! ACHTUNG! DANGER!

This image is not digitally signed.

This means that the image you uploaded is not an official/supported image and
may lead to unexpected behavior or security compromises.

Only install images that come from sources that you trust, and make sure
that the image has not been tampered with.

Do you want to install this image anyway at your own risk [n]?y

Continuing upgrade…

One moment please...

Broadcast Message from root@pfsense.localdomain
(no tty) at 13:38 EDT...

Firmware upgrade in progress...

Done. Rebooting...

jimp

@Mike:

Ok, that sort of makes sense. So, just for my own education, whats the conceptual difference between an upgrade image and the original "install" image?

The original image consists of three slices (sort of like partitions):

pfsense0
pfsense1
cf

These are two system images, and the config slice, plus the bits at the start of the image which make the whole thing bootable, etc.

An upgrade image is just one of the system slices, i.e. pfsense0/pfsense1, which is all that should get overwritten during the upgrade.

I haven't heard anything about NanoBSD upgrades working in a while. I haven't tried on my ALIX in quite some time as I had it running 1.2.3 for some other work I was doing. I have a couple NanoBSD virtual machine setup so I may see if I can reproduce this.

jlepthien

Hey guys,

sorry to 'hijack' this thread, but what about the newest may builds? Are they as stable as the 11th april build?

Thanks

Jimmy