RESOLVED - Captive Portal - Per-user bandwidth problematic
-
Hi
I am using 2.0-BETA1 built on Tue Apr 27 01:08:28 EDT 2010 + gitsync'd to latest commits.
I am running multi wan setup with captive portal enabled on 3 internal interfaces, vlan11, vlan22 and vlan33.
Apart from loading CP page and authenticating with local user manager, I am unable to pass very little traffic if any through the captive portal with "per-user bandwidth restrictions" enabled, if disabled, traffic flows normal.
I have "Disable hardware checksum offload" ticked in System > Advanced, I also have DNS pointing to OpenDNS with the primary set to use gateway "WAN1" and secondary set to use gateway "WAN2" in System > General Setup.
DNS forwarder is also enabled
I noticed quite a few state-mismatch's, though Im not too sure if it is related
INFO:
Status: Enabled for 0 days 00:41:01 Debug: UrgentInterface Stats for re1_vlan44 IPv4 IPv6
Bytes In 0 0
Bytes Out 0 0
Packets In
Passed 0 0
Blocked 0 0
Packets Out
Passed 0 0
Blocked 0 0State Table Total Rate
current entries 265
searches 1210615 491.9/s
inserts 9983 4.1/s
removals 9718 3.9/s
Counters
match 13189 5.4/s
bad-offset 0 0.0/s
fragment 0 0.0/s
short 0 0.0/s
normalize 0 0.0/s
memory 0 0.0/s
bad-timestamp 0 0.0/s
congestion 0 0.0/s
ip-option 7 0.0/s
proto-cksum 2 0.0/s
state-mismatch 184 0.1/s
state-insert 0 0.0/s
state-limit 0 0.0/s
src-limit 0 0.0/s
synproxy 0 0.0/s
divert 0 0.0/sMy interfaces as follows
my network
-
I will fix it soon and will report to try the snapshot that will have the fix.
-
Thanks for the quick reply, I tried the rules change without any luck, Ill revert those changes and keep look out on redmine.
Thanks in advance
Slam
-
Just upgrade to a newer snapshot it should be ok.
-
With the latest snapshot, its working fine and also those state-mismatch's have gone.
Thanks
Slam