Switch lan card-will settings remain as is

[brcisna]

Hi All,

I just got an 1.2.3 pfSense setup and running. Now I have decided to swap the current 10/100 nic to an gigE on the lan card. If I take the current lan card out in the web-gui,,,shut down the box, install the new gigE card I assume I will have to go through all of the port forwards routes etc? I did search this subject and could not find a definate answer?

Thanks,
Barry

[Cry Havok]

You should simply have to re-assign the interface once you switch it over.

[Efonnes]

When the interface mismatch screen comes up at boot, just make sure you assign as many interfaces as you had previously assigned and none of your rules will disappear.