HAVP broken in 2.0?
-
Well, I spoke too soon :( Althought everything seemed up and running, an eicar test failed. I could see squid was not actually talking to havp, so I tried removing havp and giving up. Net result: no squid either. Then I tried uninstalling squid and that left things totally borked. I ended up having to reinstall from scratch and reload the config file. I've not had good results with packages that depend on other packages, so I think I'm going to look for another solution (maybe run squid/lightsquid/havp on my main freebsd server and set up an rdr to that - dunno…)
-
After instalaltion HAVP need update AV bases (last tab GUI). This is process take 10-15 min for the new installation. Now i change this for automatic update on installation. Also need modify package for full compability with 2.0
ps
I have had several unsuccessful attempts to upgrade from 1.2.3 to 2.0. So now all I do on a fresh 2.0 -
Let me clarify: this might or might not have worked, if I had waited as you say (I wasn't aware of that.) What got me to give up on this was the apparent fragility of some packages that are linked to others. I have never had very good luck when it comes to restoring a config, where it has to reinstall the packages. In this case, uninstalling got things totally borked, so I gave up. It may not even have been havp, but maybe squid or lightsquid, I don't know.
-
Syslog; /var/log/clamd/clamd.log; /var/log/clamd/freshclam.log; /var/log/havp/havp.log; exists?
Please email me. -
Sorry, I appreciate the help, but it is off the firewall now, as is squid and lightsquid. After having to spend an hour re-installing from scratch, I don't want to bork this again :(
-
Okay, I think I found out one of the issues. Squid uses the ldap client, but even after deleting squid, something still had a reference to it (a php file somewhere). I had squid/lightsquid working fine, so I am re-installing those. I already have a full clamav install on my main freebsd mail/file/web server, and it always seemed silly to be doing this twice, so I got the havp port working there too. My atom mini has two spare gigabit ports, and the main server has a spare gigabit port, so I am going to connect those using a dedicated subnet and have pfsense/squid talk to havp running on the main server over that link.
-
I tried installing havp on nanobsd 2 beta. I get a bunch of warnings and errors when trying to save settings. Basically saying the it cannot open stream for writing. It was the first package i installed on 2.0 beta. Any ideas?
-
Post error message text pls.
-
Warning: file_put_contents(/usr/local/etc/havp/havp_conf.xml): failed to open stream: Read-only file system in /usr/local/pkg/havp.inc on line 560
This displays when going to the Services/Antivirus tab. I get a lot more errors when updating the settings:
Warning: file_put_contents(/usr/local/etc/havp/havp_conf.xml): failed to open stream: Read-only file system in /usr/local/pkg/havp.inc on line 560 Warning: file_put_contents(/usr/local/etc/havp/havp_conf.xml): failed to open stream: Read-only file system in /usr/local/pkg/havp.inc on line 560 Warning: file_put_contents(/usr/local/etc/rc.d/havp_avupdate): failed to open stream: Read-only file system in /usr/local/pkg/havp.inc on line 413 Warning: fopen(/usr/local/etc/rc.d/havp.sh): failed to open stream: Read-only file system in /etc/inc/service-utils.inc on line 60 Warning: fwrite(): supplied argument is not a valid stream resource in /etc/inc/service-utils.inc on line 61 Warning: fclose(): supplied argument is not a valid stream resource in /etc/inc/service-utils.inc on line 62 Warning: chmod(): Read-only file system in /etc/inc/service-utils.inc on line 63 Warning: fopen(/usr/local/etc/rc.d/clamd): failed to open stream: Read-only file system in /etc/inc/service-utils.inc on line 60 Warning: fwrite(): supplied argument is not a valid stream resource in /etc/inc/service-utils.inc on line 61 Warning: fclose(): supplied argument is not a valid stream resource in /etc/inc/service-utils.inc on line 62 Warning: chmod(): Read-only file system in /etc/inc/service-utils.inc on line 63 Warning: file_put_contents(/usr/local/etc/havp/whitelist): failed to open stream: Read-only file system in /usr/local/pkg/havp.inc on line 314 Warning: file_put_contents(/usr/local/etc/havp/blacklist): failed to open stream: Read-only file system in /usr/local/pkg/havp.inc on line 315 Warning: file_put_contents(/usr/local/etc/clamd.conf): failed to open stream: Read-only file system in /usr/local/pkg/havp.inc on line 443 Warning: file_put_contents(/usr/local/etc/havp/havp.config): failed to open stream: Read-only file system in /usr/local/pkg/havp.inc on line 321 Warning: file_put_contents(/usr/local/etc/freshclam.conf): failed to open stream: Read-only file system in /usr/local/pkg/havp.inc on line 450 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/havp.inc:560) in /usr/local/www/pkg_edit.php on line 50
I am running 2.0-BETA2
built on Fri Jun 4 18:07:10 EDT 2010
FreeBSD 8.1-PRERELEASE -
failed to open stream: Read-only file systemI'm not sure that is the problem of the package. The report says about the impossibility of writing.
Check your file system on the possibility of recording /usr/local/etc/havp. -
Sorry, i am very new to pfsense. What do you want me to do? I do understand that when running nanobsd, the package has to set the compact flash card in a read/write mode when writing data, then resetting it to read only when finished.
-
Hm.. this package not for nano-BSD.
-
crap! will it eventually be made for it?
-
crap! will it eventually be made for it?
No. CF card has a limited resource read-write.
-
So i am now running pfsense on a hard drive. I am running 2.0 beta. I installed havp but am having trouble. If i set standard for the proxy, set the port to 8080, and then set firefox to use proxy 192.168.1.1:8080, the connections fail. What am i doing wrong?
-
now trying 1.2.3 and still doesnt work