Please need help for this problem.

[ll_hellBoy_ll]

Hi. Please I need help to configure my dual wan setup. I am sure I did something wrong that’s why my load balance is not working. For example I am seeing my both wan is online but my only one connection is using. Cause when I speed test or either surfing its very slow.

I have 2 adsl connection from same ISP. My primary wan speed is 8 mbps and second one 24 mbps. but my load balancer is not working.

I have 26 workstation in my network. It’s a internet café.

Even if my primary wan goes down my all internet goes down.. so it means failover also not working.

My current setup like this.

8 mbps primary Adsl modem setup.

Bridge Mode.

Modem Ip = 10.0.0.138

DHCP = Disable

Pfsense primary setup for 8 mbps primary Adsl modem

Ppope – user name and password

24 mbps second Adsl Modem Setup

PPope,  user name and password

DHCP = Enable

Modem ip = 192.168.2.1

Pfsense opt1 setup for 24 mbps second Adsl Modem

DHCP

Ip address – 192.168.2.2/24

Gateway – 192.168.2.1

. I attach all the picture what I did on configuration page.

Please let me know what I did wrong. So that I can fix it. I will wait for the answer. Thank you. Please try to help me. Its very important …..God bless


[ll_hellBoy_ll]

please help me. why my load-balance and failover is not working.

i can ping both my wan connection from pfsense.and i can see all my connection is green on load-blance status.

i can access my both wan's modem also from my lan.

my both modem setup as a ppope. my modem's getting public ip. and pfsense as a DHCP for both wan.

I am uploading my all picture for help. Please help me

[ll_hellBoy_ll]

my other picture.

thse are my current setup. please help me. how can i fix this problem. thank you




[ll_hellBoy_ll]

Really dont know why i am not getting any help. please help me. i cant fix it. my load balance and failover is not working. but i am seeing my both wan is online on pfsense. please what i have to do for this problem.
I will wait for the help. thank you

[ll_hellBoy_ll]

Thanks to God. That At last I able made it. I am very very happy now. Its working now like a charm.though i have little problem on delay. other wise everything is working. My load Balancer and fail-over all working. I will try to solve the delay when my second wan goes online. Thank you very very much Pfsense and the Developer that they made a such a great Product. I am glad that i am using it. Thank you all and God bless all. Ba bye

[overand]

I see you're double-NATed (your 'routers'  that your pfSense box is plugged into are also NAT routers themselves) - this can cause some complications and confusion.

I would suggest you make sure that under WAN you have disabled (no checkmark in) the "Block Private (RFC 1918) addresses" - that could cause a number of issues.