Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    SNMP interface status

    2.0-RC Snapshot Feedback and Problems - RETIRED
    3
    12
    8.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • G
      gadams999
      last edited by

      Hi,

      Just did an fresh install of 2.0BETA2 (2.0-BETA2 built on Fri Jun 11 03:35:31 EDT 2010) and am liking it.

      My Nagios monitors are complaining about SNMP values. I've got SNMP fully enabled and when I snmpwalk it, get back just a subset of values:

      [root@nms02 libexec]# snmpwalk -c public -v 2c  patti
SNMPv2-MIB::sysDescr.0 = STRING: patti.peanuts.local 3577635749 FreeBSD 8.1-PRERELEASE
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.12325.1.1.2.1.1
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (288019) 0:48:00.19
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING: patti.peanuts.local
SNMPv2-MIB::sysLocation.0 = STRING:
SNMPv2-MIB::sysServices.0 = INTEGER: 76
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORID.1 = OID: SNMPv2-SMI::enterprises.12325.1.1.1.10.2
SNMPv2-MIB::sysORID.2 = OID: SNMPv2-SMI::enterprises.12325.1.1.1.10.3
SNMPv2-MIB::sysORID.3 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.4 = OID: SNMPv2-SMI::enterprises.12325.1.1
SNMPv2-MIB::sysORDescr.1 = STRING: udp transport mapping
SNMPv2-MIB::sysORDescr.2 = STRING: lsock transport mapping
SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for SNMPv2 entities.
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for the Begemot SNMPd.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.2 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.3 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORUpTime.4 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::snmpInPkts.0 = Counter32: 267
SNMPv2-MIB::snmpInBadVersions.0 = Counter32: 6
SNMPv2-MIB::snmpInBadCommunityNames.0 = Counter32: 0
SNMPv2-MIB::snmpInBadCommunityUses.0 = Counter32: 0
SNMPv2-MIB::snmpInASNParseErrs.0 = Counter32: 0
SNMPv2-MIB::snmpEnableAuthenTraps.0 = INTEGER: disabled(2)
SNMPv2-MIB::snmpSilentDrops.0 = Counter32: 0
SNMPv2-MIB::snmpProxyDrops.0 = Counter32: 0

      Not a biggie, but are there any known problems with SNMP? Tried a search, but not much came up here or on the bug tracker.

      Great work!

      1 Reply Last reply Reply Quote 0
      • C
        cmb
        last edited by

        That's all the output you get with snmpwalk? SNMP works fine on all my installs, and snmpwalk shows vastly more than that. I'm not aware of any issues with it.

        1 Reply Last reply Reply Quote 0
        • G
          gadams999
          last edited by

          That appears to be the only information listed. I also did a query starting at .1 and similar results are returned:

          $ snmpwalk -v 2c -c peanuts patti .1
          SNMPv2-MIB::sysDescr.0 = STRING: patti.peanuts.local 3577635749 FreeBSD 8.1-PRERELEASE
          SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.12325.1.1.2.1.1
          DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (3283) 0:00:32.83
          SNMPv2-MIB::sysContact.0 = STRING:
          SNMPv2-MIB::sysName.0 = STRING: patti.peanuts.local
          SNMPv2-MIB::sysLocation.0 = STRING:
          SNMPv2-MIB::sysServices.0 = INTEGER: 76
          SNMPv2-MIB::sysORLastChange.0 = Timeticks: (0) 0:00:00.00
          SNMPv2-MIB::sysORID.1 = OID: SNMPv2-SMI::enterprises.12325.1.1.1.10.2
          SNMPv2-MIB::sysORID.2 = OID: SNMPv2-SMI::enterprises.12325.1.1.1.10.3
          SNMPv2-MIB::sysORID.3 = OID: SNMPv2-MIB::snmpMIB
          SNMPv2-MIB::sysORID.4 = OID: SNMPv2-SMI::enterprises.12325.1.1
          SNMPv2-MIB::sysORDescr.1 = STRING: udp transport mapping
          SNMPv2-MIB::sysORDescr.2 = STRING: lsock transport mapping
          SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for SNMPv2 entities.
          SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for the Begemot SNMPd.
          SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00
          SNMPv2-MIB::sysORUpTime.2 = Timeticks: (0) 0:00:00.00
          SNMPv2-MIB::sysORUpTime.3 = Timeticks: (0) 0:00:00.00
          SNMPv2-MIB::sysORUpTime.4 = Timeticks: (0) 0:00:00.00
          SNMPv2-MIB::snmpInPkts.0 = Counter32: 52
          SNMPv2-MIB::snmpInBadVersions.0 = Counter32: 0
          SNMPv2-MIB::snmpInBadCommunityNames.0 = Counter32: 0
          SNMPv2-MIB::snmpInBadCommunityUses.0 = Counter32: 0
          SNMPv2-MIB::snmpInASNParseErrs.0 = Counter32: 0
          SNMPv2-MIB::snmpEnableAuthenTraps.0 = INTEGER: disabled(2)
          SNMPv2-MIB::snmpSilentDrops.0 = Counter32: 0
          SNMPv2-MIB::snmpProxyDrops.0 = Counter32: 0
          SNMPv2-SMI::enterprises.12325.1.1.1.1.1.0 = INTEGER: 2048
          SNMPv2-SMI::enterprises.12325.1.1.1.1.2.0 = INTEGER: 2048
          SNMPv2-SMI::enterprises.12325.1.1.1.1.3.0 = INTEGER: 1
          SNMPv2-SMI::enterprises.12325.1.1.1.1.4.0 = IpAddress: 0.0.0.0
          SNMPv2-SMI::enterprises.12325.1.1.1.1.5.0 = Gauge32: 3
          SNMPv2-SMI::enterprises.12325.1.1.1.4.1.3.0.0.0.0.161 = INTEGER: 1
          SNMPv2-SMI::enterprises.12325.1.1.1.7.1.0 = Counter32: 0
          SNMPv2-SMI::enterprises.12325.1.1.1.7.2.0 = Counter32: 0
          SNMPv2-SMI::enterprises.12325.1.1.1.7.3.0 = Counter32: 0
          SNMPv2-SMI::enterprises.12325.1.1.1.7.4.0 = Counter32: 0
          SNMPv2-SMI::enterprises.12325.1.1.1.8.1.0 = INTEGER: 2
          SNMPv2-SMI::enterprises.12325.1.1.1.8.2.0 = Gauge32: 0
          SNMPv2-SMI::enterprises.12325.1.1.1.8.3.0 = INTEGER: 7
          SNMPv2-SMI::enterprises.12325.1.1.1.9.1.2.19.47.118.97.114.47.114.117.110.47.115.110.109.112.100.46.115.111.99.107 = INTEGER: 1
          SNMPv2-SMI::enterprises.12325.1.1.1.9.1.3.19.47.118.97.114.47.114.117.110.47.115.110.109.112.100.46.115.111.99.107 = INTEGER: 4
          SNMPv2-SMI::enterprises.12325.1.1.1.10.1.1.2.3.117.100.112 = INTEGER: 1
          SNMPv2-SMI::enterprises.12325.1.1.1.10.1.1.2.5.108.115.111.99.107 = INTEGER: 1
          SNMPv2-SMI::enterprises.12325.1.1.1.10.1.1.3.3.117.100.112 = OID: SNMPv2-SMI::enterprises.12325.1.1.1.10.2
          SNMPv2-SMI::enterprises.12325.1.1.1.10.1.1.3.5.108.115.111.99.107 = OID: SNMPv2-SMI::enterprises.12325.1.1.1.10.3
          SNMPv2-MIB::snmpSetSerialNo.0 = INTEGER: 1203067178
          SNMPv2-MIB::snmpSetSerialNo.0 = No more variables left in this MIB View (It is past the end of the MIB tree)

          Later today I'll try a restart of pfsense and if that doesn't work, apply the latest daily build and report the results.

          1 Reply Last reply Reply Quote 0
          • jimpJ
            jimp Rebel Alliance Developer Netgate
            last edited by

            Which options do you have checked in the SNMP config?

            Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

            Need help fast? Netgate Global Support!

            Do not Chat/PM for help!

            1 Reply Last reply Reply Quote 0
            • G
              gadams999
              last edited by

              @jimp:

              Which options do you have checked in the SNMP config?

              All are active. For SNMP modules, all four (MibII, Netgraph, PF and Host Resources) are selected. Traps are disabled, but the Daemon and community string are set. I do see that interface RRDgraphs are being populated, so maybe it's a OID filter or something for non-local SNMP queries?

              I haven't tried an update on the 20100610 that I'm running.

              1 Reply Last reply Reply Quote 0
              • jimpJ
                jimp Rebel Alliance Developer Netgate
                last edited by

                I enabled the SNMP server on a VM running a snap from the 10th and it returned over 7000 lines for the same query you ran.

                Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                Need help fast? Netgate Global Support!

                Do not Chat/PM for help!

                1 Reply Last reply Reply Quote 0
                • G
                  gadams999
                  last edited by

                  Okay, progress. Since it worked for you, I started to change what modules were active. Initially, all four modules were active yet only returning 15-20 results. Once I turned off "host resources" the count of objects went to approx 1700. when I turned "host resources" back on (now all 4 are active again), I'm getting 6714 objects.

                  Things are working again!

                  1 Reply Last reply Reply Quote 0
                  • jimpJ
                    jimp Rebel Alliance Developer Netgate
                    last edited by

                    There's proably not a good way to reproduce it, but it would be nice to have seen the snmpd config file from /var/etc when it was misbehaving.

                    Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                    Need help fast? Netgate Global Support!

                    Do not Chat/PM for help!

                    1 Reply Last reply Reply Quote 0
                    • G
                      gadams999
                      last edited by

                      I would have grabbed the config but didn't think of it. However, I get the same amount of objects returned with SNMP is enabled, but all of the modules are deselected. Possible the GUI had the modules checked when they really weren't?

                      1 Reply Last reply Reply Quote 0
                      • jimpJ
                        jimp Rebel Alliance Developer Netgate
                        last edited by

                        It's possible. When I first enabled the daemon it had the module boxes all checked but greyed out, then when I saved it came back with the boxes enabled but not checked. I had to check them and save again.

                        Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                        Need help fast? Netgate Global Support!

                        Do not Chat/PM for help!

                        1 Reply Last reply Reply Quote 0
                        • G
                          gadams999
                          last edited by

                          That may have been it. I probably looked and same the modules checked prior to starting the service.

                          From a usability point of view, I'd expect that when the service is disabled the module boxes would be unchecked. Then upon enabling the daemon, the modules could be selected. I probably saw the selected checkboxes and hit "save", but never reviewed.

                          I'll keep on eye out for it in the future. It's working, so that's good in my books. Now on to traffic shaping.

                          1 Reply Last reply Reply Quote 0
                          • jimpJ
                            jimp Rebel Alliance Developer Netgate
                            last edited by

                            I opened a ticket for the GUI inconsistency. It should be fairly easy to fix.

                            http://redmine.pfsense.org/issues/659

                            Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                            Need help fast? Netgate Global Support!

                            Do not Chat/PM for help!

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.