SYN_SENT:CLOSED
-
It not a silly question… :-)
Do you mean the time reg server
I can ping it an get respond, but there is no other services on the time reg server that i can access, it´s onley open for port 28001 -
well if you can ping it, that eliminates a whole different set of possible errors. is it possible the server on that host is blocking your request? some sort of ACL or firewall rule? Can you access that port 28001 service from the other pfsense LAN?
-
How can i try that?
I can not install the time reg client on any og my servers, it is not suported. -
What do you mean "it is not supported"?
-
The software is for time reg. when we meet at work and leve.
I can not install it on any of the servers the OS is not supported.
And i onley have server OS installed on the host located in the hosting site. -
ah, okay, well that is not important. it is pretty clear from the debug info you sent that it is not an application issue. so the question: from the other pfsense site, open a command prompt and do 'telnet TIMESERVER 28001' and see if you can even connect. Obviously replace TIMESERVER with the real IP :)
-
get connection closed by remote host wen using putty.
-
now try again from your original LAN.
-
$mñ▐╦\╫ %Φæo
Connection to host lost.
-
so it got disconnected too? just so i understand this correctly: you are using telnet to connect to the exact same host that the program can't? e.g. if you connect manually, it gets disconnected right away, but the other software gets the CLOSED/SYN_SENT hang?
-
The last 2 posts is output fran telnet, and the frewall come with SYN_SENT:CLOSED
-
Oh, okay, I misremembered what the CLOSED meant. Are you sure the server with port 28001 is not somehow blocking you? If it is closing the connection it sounds like you can get there okay but are being rejected, which would not be pfsense-related.
-
Just to sanity check: when you try to connect using telnet, do you get the same "SYN_SENT/CLOSED" thing?
-
Yes i did, it som how got to work to night after i reinstalled the firewall… wired.
Still running from the same public IP address så i don´t think it is the IP thats blocked in the other end.