L2TP\IPSPEC with preshared key passthrough
-
I am trying to forward L2TP\ipsec with preshared key vpn request to my server. I have forwarded 4500, 500, and 1701 both tcp/udp on right now. I haven't had any luck what am I missing? Using version 1.2.3
-
Ive also added esp packets to be forwarded still nothing.
-
I assume you mean this? If so, you'll need to forward IKE (udp port 500), L2TP (UDP 1701) and ESP (IP protocol 50). So I guess you forgot to forward IKE. The other ports you mention seem to be unnessecary.
-
i believe the default firewall rules where on tcp
-
I have fixed the firewall rules but I am still unable to get it to work. It works internally if I put in the local ip and use it from a internal computer. And I see it allowing the ports threw when I try to connect from a remote computer
-
If you are using the combination IPSec+L2TP VPN, you don't need to let L2TP through, as that is tunneled through the IPSec VPN. I could be wrong, but I seem to recall there being some limitation of IPSec that it doesn't work with NAT on the server end, requiring the server to have a public IP.
-
http://support.microsoft.com/kb/926179
Ill give this a try.. hopefully this is the answer to all my problems
-
didnt work, does the adapter have to have a public ip?
-
kc8apf says its broken is this true?
1.2.3 is broken. Either use 1.2.2 or 2.0 beta.
-
It works now…. its not 1.2.3
Do this on the server and client and you should be fine... it just took some time to take effect
and I forgot todo it on the client computer also
http://support.microsoft.com/kb/926179