Forced speed and duplex, now interface errors..
-
The WAN side is connected to a cisco and the LAN (my side HP procurve) i had the HP set to 100FD now its auto.
When i modify the below….
<media>100baseTX</media>
<mediaopt>full-duplex</mediaopt>to..
i get a error on the restore saying there's a mismatch on the interface.
I want to make the lan interface back to auto hopefully fixing the issue...
<interfaces><lan><if>fxp0</if> <ipaddr><subnet>24</subnet> <media>100baseTX</media> <mediaopt>full-duplex</mediaopt> <bandwidth>100</bandwidth> <bandwidthtype>Mb</bandwidthtype> <bridge>wan</bridge> <disableftpproxy></disableftpproxy></ipaddr></lan> <wan><if>fxp1</if> <mtu>1500</mtu> <media>100baseTX</media> <mediaopt>full-duplex</mediaopt> <bandwidth>100</bandwidth> <bandwidthtype>Mb</bandwidthtype> <spoofmac>02:21:59:87:e6:d5</spoofmac> <disableftpproxy><ipaddr>216.151.xx.xx</ipaddr> <subnet>24</subnet> <gateway>216.151.xx.xx</gateway></disableftpproxy></wan></interfaces>
-
That isn't a proper empty tag, so you're making it an invalid XML file.
Either delete the tags entirely, or use <media>and <mediaopt>. Deleting them is better.</mediaopt></media>