Configuring Transparent Mode

globalmcs · Jul 16, 2010, 11:06 PM

The option "Automatic outbound NAT rule generation (IPsec passthrough)" is selected.

danswartz · Jul 16, 2010, 11:43 PM

aha, click to AON (manual) and delete the rule that then appears.

globalmcs · Jul 16, 2010, 11:55 PM

I did it and lost internet connectivity from the LAN and the OTP1 still the same.
I selected the "Automatic outbound NAT rule generation (IPsec passthrough)" back.

danswartz · Jul 17, 2010, 12:15 AM

sorry, my bad. re-enable manual AON and tell me what rule you see.

globalmcs · Jul 17, 2010, 12:26 AM

Its ok, I appreciate you trying to help me.
Here is the only rule when manual AON is Enabled

Interface Source Source Port Destination Destination Port NAT Address NAT Port Static Port Description
WAN 192.168.1.1/24 * * * * * NO Auto created rule for LAN

danswartz · Jul 17, 2010, 12:38 AM

okay, that is correct. can you post contents of /tmp/rules.debug?

globalmcs · Jul 17, 2010, 1:01 AM

I hope you dont mind but I emailed it to you, didn't want to post it.

globalmcs · Jul 18, 2010, 1:44 AM

Hey Dan, I just wanted to let you know that with version "2.0-BETA3" the Transparent Mode (bridge) is working. I notice one issue on the server in OPT1, if I restart it can't get out to the internet 'till I "repair" the network connection.

By repair I mean, in Windows going to Network Connections right clicking on the connection and selecting the option to repair.

Thanks for all your help

danswartz · Jul 18, 2010, 1:46 AM

glad it is working. if this server has a static IP what you are describing is odd. be interesting to run a packet trace on the OPT1 interface after booting the server and then doing the repair.

globalmcs · Jul 20, 2010, 12:45 AM

Hi, sorry I didn't get back to you sooner, I was not able to reproduce the error to run a packet capture - I'll make sure to run capture it if it ever happens again.

Thank you again for all your help!