Pfsense does not recognize 4GB ram
-
HI thanks
I am using
SmartValue! DELL
PowerEdge R210 (SV3R210)ref :http://configure.euro.dell.com/dellstore/config.aspx?c=uk&cs=ukbsdt1&kc=305&l=en&oc=SV3R210&s=bsd&sbc=poweredge-r210
With 4GB of ram and the cpu is :
Intel
Pentium G6950, 2C, 2.80GHz, 4M Cache, Memory runs at 1066MHz MaxI have few more server of same configuration. and I have installed Centos 64Bit on those
so which means i would be able to install pfsense 64 bit , is not it ??
Thanks again for your supports
-
It should work then. Just keep in mind that pfSense 2.0 is still BETA, not a release, so there are still some things that may not work.
Here is a link to an .iso you can use to install it. If you have issues with 2.0, post in the 2.0 board:
http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/amd64/pfSense_HEAD/livecd_installer/pfSense-2.0-BETA4-20100811-0244.iso.gz
-
Hi thanks
I just need bellow 4 packages to work
Snort,Squid,Squid Guard,LightSquid,Bandwidthd
is there any known issue with those 4 packages with 64 bit system ??
-
Snort may not work - I think the others are OK. Squid and SquidGuard worked the last time I tested them.
2.0 isn't the issue for packages working, almost all of them are fine there, it's the 64-bit platform that may not have all the packages in order.
-
I am loving pfsense mostly for the snort . it has nice way to block offender by using snort .
but you saying, snort might not work with 64bit, in that case i will have to stick with 32 bit, as i really want to use snort .
but if you say : snort might work, might not then i will 64 bit a try ..
-
I haven't tried snort on x64, so I can't say for sure. It might be worth trying. It may not work right now, but it will be fixed eventually.
-
Ok thanks
I will give it a tryand will come back to you on 2.0 Board
-
One more thing , i need advise ..
is this 64 bit recommended to put in production environment ??
if i put this 64bit in production, will there would be any security problem as this is not tested properly
-
I have few more server of same configuration. and I have installed Centos 64Bit on those
so which means i would be able to install pfsense 64 bit , is not it ??
Yes, those system should support the 64 bit version of pfSense.
@kpa:
Number of channels (dual or single) has nothing to do with the OS's ability to use the memory in 3-4GB region in case of 32-bit operating systems.
Agreed, my remark about number of memory channels wasn't meant to have anything to do with memory in any particular region it was rather about the consequences of think of some of the memory as "wasted".
Consider a system with dual memory channels, four memory slots each with 1GB of RAM. You boot and see there is 1GB "wasted" memory and remove a stick. Now you have a configuration that at best has a lower available memory bandwidth than it did with 4 memory sticks. Even though that memory is not able to be accessed it is not "wasted" because its presence gives higher memory bandwidth than could be seen in its absence. The higher memory bandwidth might be important if the CPU has multiple threads all working pretty hard.
The guide for the relatively recent motherboard (ASUS M3A78-EMH HDMI) effectively says a user may have one, two or four memory sticks in the system. The guide for a newer motherboard (ASUS M4A785D-M PRO) doesn't suggest that three memory sticks is a bad choice but mentions that some memory may operate in single channel mode if the memory configuration is not chosen wisely.
-
It's a BETA snapshot - so that is up to you. We don't generally recommend them for production yet, but some people use them without problems.
There should not be any security issues. There might be a couple missing features or things that don't work quite as expected yet, but those are getting better every day.
It's up to what is required for your system. If you must have more than 4GB of RAM, then you will need to use x64. If you can get by with less for now, stick with 1.2.3 and update after 2.0 is released for real.
