Mobile IPSec - default route not set trough tunnel

eazydor

when connected to the pfsense via mobile ipsec, traffic isn't routed per default trough the tunnel, even if i priorize the connection manually, the route trough the tunnel becomes the second entry in the routing table.
when connecting i.e. to a lancon ipsec the default route is set trough the tunnel.
besides this behavior everything works fine..

is this normal behavior?
is there a way to push the default route, like i.e. openvpn?

Snapshot: 17/08/2010; 386.
i will try to supply more documentation as soon as possible at the moment..

spiritbreaker

Hi,

what about your config?

Route all traffic into tunnel:

1. VPN -> IPsec -> Tunnels -> Phase 2 page set local network to none.
2. VPN -> IPsec -> Mobile Clients -> goto network list and uncheck "Provide a list of accessible networks to clients".

I tested a few days before, its working with iPhone, Cisco Client on XP and ShrewSoft VPN.

Also have a look at this topic http://forum.pfsense.org/index.php/topic,27394.0.html

cya

eazydor

hi spiritbreaker..

i'm still dealing around with this problem and it's difficult since i can't access internet all the time, at least for the moment…
but hey, thanks for your reply..

what about the (outbound) nat rule you & azzido had to create..
because local networking is allright, but this (outbound traffic with ipec-ip's) may be one of the causes, why i have outbound problems..

still changing the local network to none solved the problem with the routing table, i.r. routing all traffic trough tunnel.

thanks for your help, man..

S.