PUBLISH WEB SERVER PFSENSE
-
sorry you can set with the system and take pictures VMnet yourself but with the setting of NAT PORT Rule or you do not succeed! thank you :(
-
I am not following.
@vanchienbmt:sorry you can set with the system and take pictures VMnet yourself but with the setting of NAT PORT Rule or you do not succeed! thank you
?????
According to your picture you are double natting, so either do what I stated in my previous post or set both the dsl router/gateway with the firewall disabled or port forward everything to the pf box. -
I can access the Web from the network layer in the DMZ 192.168.1.x 192.168.2.x network layer but when the NAT on the DMZ port via modem using the WAN IP access server can not find who did it help I thank the many ???
-
vanchienbmt -
What is your native language? Have you looked to see if it is listed on the boards here below?
Double NAT port forwarding is tricky but can be done, however you might be better off setting up your modem in bridge mode if possible and letting your pfSense box do the log in.
Good Luck!
-
I was a student Vietnam still limited knowledge does not do her any you have experienced the post with specific instructions thank you :-[
-
Look through these screen shots… There is a couple of pages related to port forwarding there.
http://www.pfsense.org/screenshots/
-
thank you but you can offline chpalmer specific video help me? I can not really be smart for not understanding the demo video you can help yourself to thank all offline
-
http://doc.pfsense.org/index.php/How_can_I_forward_ports_with_pfSense%3F
-
I understand your article and understand the principles but failed to do so skeptical need help with video from the first one you go again thank you all. A happy day ;D
-
No you don't need a video.
What doesn't work with the guide from the wiki? -
what doesn't work is he doesn't have someone doing all the work for him.
-
why don't you just start by bridging the dsl modem to make things less complicated on you?
