Dual WAn / load balance not working.

datarite64

Thank you in advance for any and all help….

I will try to explain my situation.

I was running 1.2.3 with dual wan / loadballancing and failover without any problems.

I have just installed
2.0-BETA4 (i386)
built on Sun Aug 22 06:39:51 EDT 2010
FreeBSD 8.1-RELEASE

LAN with Static ip 192.168.1.1
WAN with static ip 192.168.0.1 and gateway 192.168.0.254
OPT1 with static ip 192.168.2.1 and gateway 192.168.2.254

lan is connected to 8 port switch ----> pc's
WAN is connected directly to DSL modem (static ip 192.168.0.254)
OPT1 is connected directly to DSL modem (static ip 192.168.2.254)

I have also created Gateways"
Name Interface Gateway Monitor IP Description

BackupADSL OPT1 192.168.2.254 192.168.2.254 Backup
MainADSL WAN 192.168.0.254 192.168.0.254 Main ADSL

Gateway Groups
Group Name Gateways Priority Description
LoadBalancer BACKUPADSL Tier 1
MAINADSL Tier 1 LoadBalancer

My issue is ALL trafic is going through the WAN/Main ADSL

I can ping both modems from the PFSENSE ping command but have obviously missed something to make it load balance.

Any helpwill be appreciated.

datarite64

I found my answers…..
http://forum.pfsense.org/index.php/topic,27390.0.html

roi

Plz share…

pieter64

It was so simple….

I had forgot to change the gateway to "LoadBalancer" in my instance

In the firewall - rules - LAN

ID Proto Source Port Destination Port Gateway Queue Schedule Description

* LAN net * * * LoadBalancer none Default allow LAN to any rule (LOADBALANCE AND FAILO

I hope this helps

CryoGenID

Thanks!

That was just the little piece I missed all the time to finally get the loadbalancer working :D

Best regards,

Chris