Multiwan with pfsense 1.2.3\. Pool no showing link up after gateway reconnect
-
I am using pfsense 1.2.2 so far not upgrading to 1.2.3 because having this issue with MultiWAN in 1.2.3.
I configure Multiwan as,
WAN2FailtoWAN1 WAN1 ( 8.8.8.8 )
(Failover) WAN2 ( 8.8.4.4 )WAN1FailtoWAN2 WAN2 ( 8.8.4.4 )
(Failover) WAN1 ( 8.8.8.8 )LoadBalance WAN1 ( 8.8.8.8 )
WAN2 ( 8.8.4.4 )Everything work out fine. But when I try disconnect WAN1 (on purpose) the pool take less then 20 secs to show link down. Then I reconnect back WAN1 and WAN1 pool still show link down even after I waited for 1 - 2 hours. It just doesn't show link up again after disconnect but I can actually see there's traffic flowing in and out of WAN1 when I test download files.
In order to make WAN1 show link up (after disconnect) I may actually need to change the monitoring IP address of WAN1 ( 8.8.8.8 ) to something else on both failover and loadbalance pool and save the setting.
If anyone know solution to this issue please help. Thanks in advance.
-
What type of WAN is WAN1? DHCP? PPPoE? Static IP?
-
Sorry to reply so late.
Both WAN1 and WAN2 are static IP.
WAN1 IP = 10.1.1.2 Gateway 10.1.1.1 (Modem IP)
WAN2 IP = 10.1.2.2 Gateway 10.1.2.1 (Modem IP)