Can't add static route
-
hello,
pfSense 2.0-BETA4 (i386)built on Thu Sep 23 11:51:18 EDT 2010 FreeBSD 8.1-RELEASE-p1
I can't add a static route: "A valid gateway must be specified"
My network:
ComputersLan1
|172.16.0.x
|(LAN1)
|172.16.0.254
MODEM–--------------------PFSENSE----------------NETWORK_CORE-----------------ComputersLan2
192.168.0.254--192.168.0.251 10.0.0.254--10.0.0.253 172.17.0.0.254--172.17.0.0.x
(WAN) (INTERCO) (LAN2)Pfsense server have two networks card em0 and em1 connected to the Network-core with LAAG-LACP
The 3 iface of pfsense are VLAN on the LAAG (laag0):
WAN (DHCP and default gateway) 192.168.0.0/24
LAN 172.16.0.0/24
INTERCO 10.0.0.0/24I want to add a static route to join LAN2 (172.17.0.0/4)
I had add a gateway:
Interface: INTERCO
name: Core
Gateway: 10.0.0.253But when a want add the static route:
Destination network: 172.17.0.0/24
Gateway: i select "Core - 10.0.0.253"I get: "A valid gateway must be specified"
Thank in advance
-
Is this problem related to gateway problem that i had seen in
others topic ?Thank
-
hi,
Looks like the problem is specific to pfsense itself. What happens if you go to shell and add static manually using route command?
cheers,
-
hi,
Looks like the problem is specific to pfsense itself. What happens if you go to shell and add static manually using route command?
cheers,
if i download the config, edit it to manually add the static route en upload the config, that work.
-
I can confirm this error. I have the following setup:
Site 1----------------------- Site 2 | | DNS at 192.168.11.123 Site2:Static route to 192.168.11.123 via LAN interface (Goes through IPSec)I get the same error "A valid gateway must be specified".
Running an older version of pfSense on other hardware does not have this issue.Non-working version:
2.0-BETA4 (i386)
built on Mon Sep 27 05:13:14 EDT 2010
FreeBSD 8.1-RELEASE-p1Working (old) version:
2.0-BETA4 (i386)
built on Sun Sep 5 18:43:23 EDT 2010
FreeBSD 8.1-RELEASE