Install from USB drive (working)
-
Give it a try:
http://cvs.pfsense.org/~jimp/pfSense-1.2.3-usbinstall.img.gz
Let me know if there are any issues.
-
Your welcome Flashman hope it will work for you just as good as it did for me.
Jimp I didnt put a link to your file as i wasnt sure if you wanted this.
Thanks
Nem
-
Jimp I didnt put a link to your file as i wasnt sure if you wanted this.
I moved it to a more public location :)
-
That worked perfectly. You should sticky this post.
Jason
-
Great it worked for you as well Flashman.
Big thanks to Jimp though as he made the usb version i only added the howto to write to the usb stick :)
-
Big thanks to Jimp though as he made the usb version i only added the howto to write to the usb stick :)
Edit your first post to include the url and a shout-out to me, and I'll sticky the thread. :-)
-
Another note: Instead of DD, you could also have used physdiskwrite/physgui, or Image Writer for Windows.
Jim
-
I'm not able to decompress the .gz file. Is there anyting wrong with it ?
edit :
When using wget it was ok….... -
I'm not able to decompress the .gz file. Is there anyting wrong with it ?
edit :
When using wget it was ok…....Some browsers (like Opera, and I think Safari on a Mac) will decompress the file as it downloads, but not rename it. Using wget/fetch is usually safer.
-
In many cases you can get around that by right-clicking the link and selecting "save link as" or "save target as" (whatever the browser has) instead of just opening the link normally.
-
Run this command: "dd if=pfSense-1.2.3-usbinstall.img of=\.*g:* bs=1k"
where g: is the drive of the usb stick.
Exelent post is working
-
Im also havin some problem with decompressing this. Could anyone decompress and reupload as .rar please?
-
Every other file distributed by pfSense is gzip compressed. It shouldn't be any harder to decompress than any other image.
-
Every other file distributed by pfSense is gzip compressed. It shouldn't be any harder to decompress than any other image.
@Efonne:
In many cases you can get around that by right-clicking the link and selecting "save link as" or "save target as" (whatever the browser has) instead of just opening the link normally.
Solved by doin this. :) totally missed that comment.
-
hey guys i tried both dd and windiskimager, they write the image to the pendrive but at the moment to boot from it doesnt work :(…..any tips? thx
-
Did you try downloading the link in a different browser? Or right clicking the link and choosing "Save Link As"?
-
yes i did that way too,i tried another pen too,no luck,when dd or diskimager finish i try to access to the pendrive and i say that isnt formated,is that normal?
-
That is normal. Windows won't see the partition, because Windows doesn't understand FreeBSD's file system (ufs2)
-
oh yeah,my bad,but i cant boot from the pen yet :(
-
It may be your BIOS. I have encountered many systems over the years that would either not boot from USB, or would only do so unreliably.
