Multiple Package problems (2.0BETA4 amd64 Sep29)

Qsonx

Hello, I'm a new poster on the forum and I have searched these at multiple places before I decided to make an account and post.

I currently am running the 64-bit Snapshot from "Wed Sep 29 21:59:05 UTC 2010"

I am having a problem with Squid and BandwidthD. I have attempted to install them from the package manager. They both install fine; they show up in the webgui. The problem is they wont start. BandwidthD does absolutely nothing when I try to start the service. No log, nothing. It is as if no command is sent. I tried to manually run BandwidthD and got a reply of "Command not Found". Squid will start for a few seconds and crashed. Below is from the logs.

2010/09/30 18:45:18| Starting Squid Cache version 2.7.STABLE9 for amd64-portbld-freebsd8.0...
2010/09/30 18:45:18| Process ID 45582
2010/09/30 18:45:18| With 11095 file descriptors available
2010/09/30 18:45:18| Using kqueue for the IO loop
2010/09/30 18:45:18| DNS Socket created at 0.0.0.0, port 58365, FD 15
2010/09/30 18:45:18| Adding domain localdomain from /etc/resolv.conf
2010/09/30 18:45:18| Adding nameserver 4.2.2.1 from /etc/resolv.conf
2010/09/30 18:45:18| Adding nameserver 8.8.8.8 from /etc/resolv.conf
2010/09/30 18:45:18| Referer logging is disabled.
2010/09/30 18:45:18| logfileOpen: opening log /dev/null
2010/09/30 18:45:18| Unlinkd pipe opened on FD 20
2010/09/30 18:45:18| Swap maxSize 102400 + 8192 KB, estimated 8507 objects
2010/09/30 18:45:18| Target number of buckets: 425
2010/09/30 18:45:18| Using 8192 Store buckets
2010/09/30 18:45:18| Max Mem  size: 8192 KB
2010/09/30 18:45:18| Max Swap size: 102400 KB
2010/09/30 18:45:18| Local cache digest enabled; rebuild/rewrite every 3600/3600 sec
2010/09/30 18:45:18| Store logging disabled
2010/09/30 18:45:18| Rebuilding storage in /var/squid/cache (CLEAN)
2010/09/30 18:45:18| Using Least Load store dir selection
2010/09/30 18:45:18| Current Directory is /usr/local/www
2010/09/30 18:45:18| mimeLoadIconFile: /usr/local/etc/squid/icons/(null): (2) No such file or directory
2010/09/30 18:45:18| mimeLoadIconFile: /usr/local/etc/squid/icons/(null): (2) No such file or directory
2010/09/30 18:45:18| Loaded Icons.
2010/09/30 18:45:18| Accepting proxy HTTP connections at 10.20.31.2, port 3128, FD 23.
2010/09/30 18:45:18| Accepting HTCP messages on port 4827, FD 24.
2010/09/30 18:45:18| Accepting SNMP messages on port 3401, FD 25.
2010/09/30 18:45:18| WCCP Disabled.
2010/09/30 18:45:18| Ready to serve requests.
2010/09/30 18:45:18| Done reading /var/squid/cache swaplog (0 entries)
2010/09/30 18:45:18| Finished rebuilding storage from disk.
2010/09/30 18:45:18|         0 Entries scanned
2010/09/30 18:45:18|         0 Invalid entries.
2010/09/30 18:45:18|         0 With invalid flags.
2010/09/30 18:45:18|         0 Objects loaded.
2010/09/30 18:45:18|         0 Objects expired.
2010/09/30 18:45:18|         0 Objects cancelled.
2010/09/30 18:45:18|         0 Duplicate URLs purged.
2010/09/30 18:45:18|         0 Swapfile clashes avoided.
2010/09/30 18:45:18|   Took 0.3 seconds (   0.0 objects/sec).
2010/09/30 18:45:18| Beginning Validation Procedure
2010/09/30 18:45:18|   Completed Validation Procedure
2010/09/30 18:45:18|   Validated 0 Entries
2010/09/30 18:45:18|   store_swap_size = 0k
FATAL: Received Segment Violation...dying.
2010/09/30 18:45:18| storeDirWriteCleanLogs: Starting...
2010/09/30 18:45:18|   Finished.  Wrote 0 entries.
2010/09/30 18:45:18|   Took 0.0 seconds (   0.0 entries/sec).
CPU Usage: 0.015 seconds = 0.007 user + 0.007 sys
Maximum Resident Size: 6116 KB
Page faults with physical i/o: 0

I am also currently running this on ESXi 4.1 and after trying different methods I revert to a snapshot. I had no issues on the snapshot from August 17th other than BandwidthD.

Any ideas?

I am also secretly testing this with ~50 users. QoS with Layer-7 seems to be working fine though.

jimp

The squid package on amd64 is quite broken lately, something that happens (not sure what) when the packages are automatically compiled nightly is affecting the build.

Qsonx

Thanks. I guess I will just roll the dice and hope for a good build soon. Any idea why BandwidthD isnt working? i had the same problem on the 32bit build too. It will install buy wont start the service. no errors

jimp

Rolling back won't help - the package binary on the package server is the problem. It would be the same on the old build when it reinstalls (unless you're talking about a VM snapshot…)