Kernel panic 4-5 Nov (i386)

FisherKing

Hi singerie - So it probably isn't PPPoE then. Thanks.

are you running either Captive Portal or Traffic shaping?
What network driver is your WAN using?

singerie

i'm not using captive portal or traffic shaping, but i use multi wan, but only as a failover.

My network card is a Intel pci-e.

wallabybob

I've seen similar panics in a build of 9-Nov. More in http://forum.pfsense.org/index.php/topic,29927.0.html

Beerman

Same panic here: http://forum.pfsense.org/index.php/topic,30048.0.html

FisherKing

Beerman, Wallabybob, I'm curious, what nic is assigned to your WAN? Or what driver is your WAN using?

wallabybob

I'm using rl0 for my WAN interface. I could easily swap to vr0 or a wireless link or a USB NIC if you thought it worthwhile to gather some more data. I can reproduce my problem fairly easily.

Efonnes

My Alix 2c3 has this happen when updating and randomly at some other times when accessing the web gui. WAN is vr1 and uses only DHCP, LAN is vr0, and I have ath0 for an access point on OPT1.

PJ2: Some good information there. It looks like it is crashing in the same function at the same line of code every time, called from the same code path.

wallabybob

I swapped interfaces so vr0 was my WAN and on three restarts I've hit the same panic: syncache: mbuf too small

FisherKing

I had wondered if it was just an issue w/ intel nics. Sounds like it's not that specific. Thanks Wallabybob.

Beerman

@PJ2:

Beerman, Wallabybob, I'm curious, what nic is assigned to your WAN? Or what driver is your WAN using?

My WAN is on vr2_vlan7. (ALIX Board)

CryoGenID

Any updates on this already?

We are also facing this problem here…
We stumbled over this "bug" (or whatever it is) a few weeks ago, when we tried to update to the newest snapshot...
Normally we used to update every few days and then suddenly we got this "Fatal Trap 12"-Error during the update...

It seems to be related to the update-system of pfSense, as it occurs either when checking for a new FW or trying to
download a new FW (using the Web-Interface or the Shell doesn't matter, the Trap comes anyway).
(I have attached a screenshot of our system)

We are using pfSense on >10 boxes, all with the same HW.
We have already switched the complete HW, but the problem stays the same (so I doubt that it is related to HW).

WAN1: ste0
WAN2: ste1
LAN: vr0

Hopefully there will be a fix soon (as we want to be able to upgrade again, also because of the now fixed PPTP-Bug)...

Thanks a lot and best regards,

Christian

pfSense_ERROR.jpg_thumb

CryoGenID

Hello everybody,

are there already any news on this?
As I can on other threads here, the "kernel panic"-problem seems to be happening to a lot of people…

Is this a bug in FreeBSD itself oder pfSense?

Thanks and best regards,

Christian

eri--

I am looking into it and will post when a solution is checked in.

CryoGenID

Perfect, ermal,

thank you :)

Best regards,

Chris

FisherKing

Yeah - thanks for looking into this ermal. It's hard to to much other testing when we can't do anything w/ the GUI. :)

Let us know if you need any other information. I can probably arrange remote access to the box if you can't reproduce this on your hardware.

mbartosch

Hi,

unhappy camper as well. Using the snapshot from 2010-11-18 I tried to configure an interface group, after this I got trapped in a kernel trap - reboot loop.

Running on a Soekris 5501.

FreeBSD/i386 bootstrap loader, Revision 1.1
(sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org, Thu Nov 18 07:57:55 EST 20)
…
vlan7: changing name to 'lagg0_vlan2920'
vlan8: changing name to 'lagg0_vlan2921'
vlan9: changing name to 'lagg0_vlan2930'
vlan10: changing name to 'lagg0_vlan2931'

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x14
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc095d504
stack pointer = 0x28:0xc33fbb48
frame pointer = 0x28:0xc33fbb78
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 11 (swi4: clock)
trap number = 12
panic: page fault
cpuid = 0
Uptime: 29s

eri--

Give a shot at tomorrows snapshots.

FisherKing

Wahoo! Thanks ermal!

bEsTiAn

coming from my own thread :
http://forum.pfsense.org/index.php/topic,30207.msg157592.html
Unfortunately, using latest available snaphost, the crash repeats, after 1 or 2 minutes uptime

FisherKing

Yeah - I installed the 2010-11-25 update and experienced the same thing.

Ermal - do you need a backtrace from the current snapshot, or is what you have already sufficient?