Latest snapshots (i386,full) DIOCADDRULE device busy+cannot define table bogons
-
BTW: reading a bit over my posted log I noticed some entries for snort. I once installed it, but removed it long ago.
-
anyone else getting these errors?
-
Ok I tried Sat Nov 13 21:38:35 snapshot
Same errors and some rules or gateway groups aren't working. For example I can't access any host on port 25 from my "mail" interface while ssh outgoing is fine.
Port 25 outgoing is using gatewaygroup "GWmx_failover" (see rules.debug posted above) which consists of 2 gateways on 2 different wan interfaces configured for static ips ( <gw_upc>Tier1 and <gw_aon>Tier2). Additionally it's using AON to SNAT source ips for connections originating from the "mail" interface.This was working fine till snapshot from 12th oct. (the last one I tried before upgrading to recent Nov. snapshots).
Unfortunately being in a hurry to get the mailserver online again, I forgot to grab the current rules.debug.
The rules.debug I previously posted should still apply (I hope?), although interface names differ as this is another machine (but same config)If it helps I could send you my config by mail.
Here's the system.log:
Nov 14 13:22:55 pfsense1 syslogd: kernel boot file is /boot/kernel/kernel Nov 14 13:22:55 pfsense1 kernel: Copyright (c) 1992-2010 The FreeBSD Project. Nov 14 13:22:55 pfsense1 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Nov 14 13:22:55 pfsense1 kernel: The Regents of the University of California. All rights reserved. Nov 14 13:22:55 pfsense1 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Nov 14 13:22:55 pfsense1 kernel: FreeBSD 8.1-RELEASE-p1 #1: Sat Nov 13 21:36:48 EST 2010 Nov 14 13:22:55 pfsense1 kernel: sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386 Nov 14 13:22:55 pfsense1 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Nov 14 13:22:55 pfsense1 kernel: CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.90-MHz 686-class CPU) Nov 14 13:22:55 pfsense1 kernel: Origin = "GenuineIntel" Id = 0xf29 Family = f Model = 2 Stepping = 9 Nov 14 13:22:55 pfsense1 kernel: Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Nov 14 13:22:55 pfsense1 kernel: Features2=0x4400 <cnxt-id,xtpr>Nov 14 13:22:55 pfsense1 kernel: real memory = 3221225472 (3072 MB) Nov 14 13:22:55 pfsense1 kernel: avail memory = 3141349376 (2995 MB) Nov 14 13:22:55 pfsense1 kernel: ACPI APIC Table: <ibm ="" seronyxp="">Nov 14 13:22:55 pfsense1 kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Nov 14 13:22:55 pfsense1 kernel: FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads Nov 14 13:22:55 pfsense1 kernel: cpu0 (BSP): APIC ID: 0 Nov 14 13:22:55 pfsense1 kernel: cpu1 (AP/HT): APIC ID: 1 Nov 14 13:22:55 pfsense1 kernel: cpu2 (AP): APIC ID: 6 Nov 14 13:22:55 pfsense1 kernel: cpu3 (AP/HT): APIC ID: 7 Nov 14 13:22:55 pfsense1 kernel: MADT: Forcing active-low polarity and level trigger for SCI Nov 14 13:22:55 pfsense1 kernel: ioapic2 <version 1.1="">irqs 32-47 on motherboard Nov 14 13:22:55 pfsense1 kernel: ioapic1 <version 1.1="">irqs 16-31 on motherboard Nov 14 13:22:55 pfsense1 kernel: ioapic0 <version 1.1="">irqs 0-15 on motherboard Nov 14 13:22:55 pfsense1 kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. Nov 14 13:22:55 pfsense1 kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Nov 14 13:22:55 pfsense1 kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xc075aa40, 0) error 1 Nov 14 13:22:55 pfsense1 kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. Nov 14 13:22:55 pfsense1 kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Nov 14 13:22:55 pfsense1 kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc075ab00, 0) error 1 Nov 14 13:22:55 pfsense1 kernel: wlan: mac acl policy registered Nov 14 13:22:55 pfsense1 kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. Nov 14 13:22:55 pfsense1 kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Nov 14 13:22:55 pfsense1 kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc075abc0, 0) error 1 Nov 14 13:22:55 pfsense1 kernel: wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. Nov 14 13:22:55 pfsense1 kernel: wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. Nov 14 13:22:55 pfsense1 kernel: module_register_init: MOD_LOAD (wpi_fw, 0xc094f730, 0) error 1 Nov 14 13:22:55 pfsense1 kernel: kbd1 at kbdmux0 Nov 14 13:22:55 pfsense1 kernel: cryptosoft0: <software crypto="">on motherboard Nov 14 13:22:55 pfsense1 kernel: padlock0: No ACE support. Nov 14 13:22:55 pfsense1 kernel: acpi0: <ibm seronyxp="">on motherboard Nov 14 13:22:55 pfsense1 kernel: acpi0: [ITHREAD] Nov 14 13:22:55 pfsense1 kernel: acpi0: Power Button (fixed) Nov 14 13:22:55 pfsense1 kernel: acpi0: reservation of 460, 2 (4) failed Nov 14 13:22:55 pfsense1 kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 Nov 14 13:22:55 pfsense1 kernel: acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0 Nov 14 13:22:55 pfsense1 kernel: cpu0: <acpi cpu="">on acpi0 Nov 14 13:22:55 pfsense1 kernel: cpu1: <acpi cpu="">on acpi0 Nov 14 13:22:55 pfsense1 kernel: cpu2: <acpi cpu="">on acpi0 Nov 14 13:22:55 pfsense1 kernel: cpu3: <acpi cpu="">on acpi0 Nov 14 13:22:55 pfsense1 kernel: pcib0: <acpi host-pci="" bridge="">on acpi0 Nov 14 13:22:55 pfsense1 kernel: pci0: <acpi pci="" bus="">on pcib0 Nov 14 13:22:55 pfsense1 kernel: vgapci0: <vga-compatible display="">port 0x2400-0x24ff mem 0xf0000000-0xf7ffffff,0xfebf0000-0xfebfffff irq 24 at device 5.0 on pci0 Nov 14 13:22:55 pfsense1 kernel: atapci0: <serverworks csb5="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x700-0x70f at device 15.1 on pci0 Nov 14 13:22:55 pfsense1 kernel: ata0: <ata 0="" channel="">on atapci0 Nov 14 13:22:55 pfsense1 kernel: ata0: [ITHREAD] Nov 14 13:22:55 pfsense1 kernel: ata1: <ata 1="" channel="">on atapci0 Nov 14 13:22:55 pfsense1 kernel: ata1: [ITHREAD] Nov 14 13:22:55 pfsense1 kernel: ohci0: <ohci (generic)="" usb="" controller="">mem 0xfebef000-0xfebeffff irq 11 at device 15.2 on pci0 Nov 14 13:22:55 pfsense1 kernel: ohci0: [ITHREAD] Nov 14 13:22:55 pfsense1 kernel: usbus0: <ohci (generic)="" usb="" controller="">on ohci0 Nov 14 13:22:55 pfsense1 kernel: isab0: <pci-isa bridge="">at device 15.3 on pci0 Nov 14 13:22:55 pfsense1 kernel: isa0: <isa bus="">on isab0 Nov 14 13:22:55 pfsense1 kernel: pcib1: <acpi host-pci="" bridge="">on acpi0 Nov 14 13:22:55 pfsense1 kernel: pci2: <acpi pci="" bus="">on pcib1 Nov 14 13:22:55 pfsense1 kernel: pcib2: <acpi host-pci="" bridge="">on acpi0 Nov 14 13:22:55 pfsense1 kernel: pci4: <acpi pci="" bus="">on pcib2 Nov 14 13:22:55 pfsense1 kernel: pcib3: <pci-pci bridge="">at device 4.0 on pci4 Nov 14 13:22:55 pfsense1 kernel: pci5: <pci bus="">on pcib3 Nov 14 13:22:55 pfsense1 kernel: fxp0: <intel 100="" 82550="" pro="" ethernet="">port 0x3000-0x303f mem 0xef040000-0xef040fff,0xef000000-0xef01ffff irq 22 at device 4.0 on pci5 Nov 14 13:22:55 pfsense1 kernel: miibus0: <mii bus="">on fxp0 Nov 14 13:22:55 pfsense1 kernel: inphy0: <i82555 10="" 100="" media="" interface="">PHY 1 on miibus0 Nov 14 13:22:55 pfsense1 kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Nov 14 13:22:55 pfsense1 kernel: fxp0: [ITHREAD] Nov 14 13:22:55 pfsense1 kernel: fxp1: <intel 100="" 82550="" pro="" ethernet="">port 0x3040-0x307f mem 0xef041000-0xef041fff,0xef020000-0xef03ffff irq 23 at device 5.0 on pci5 Nov 14 13:22:55 pfsense1 kernel: miibus1: <mii bus="">on fxp1 Nov 14 13:22:55 pfsense1 kernel: inphy1: <i82555 10="" 100="" media="" interface="">PHY 1 on miibus1 Nov 14 13:22:55 pfsense1 kernel: inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Nov 14 13:22:55 pfsense1 kernel: fxp1: [ITHREAD] Nov 14 13:22:55 pfsense1 kernel: pcib4: <acpi host-pci="" bridge="">on acpi0 Nov 14 13:22:55 pfsense1 kernel: pci6: <acpi pci="" bus="">on pcib4 Nov 14 13:22:55 pfsense1 kernel: em0: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.2="">port 0x4000-0x403f mem 0xecfe0000-0xecffffff irq 16 at device 1.0 on pci6 Nov 14 13:22:55 pfsense1 kernel: em0: [FILTER] Nov 14 13:22:55 pfsense1 kernel: em1: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.2="">port 0x4040-0x407f mem 0xecfc0000-0xecfdffff irq 17 at device 1.1 on pci6 Nov 14 13:22:55 pfsense1 kernel: em1: [FILTER] Nov 14 13:22:55 pfsense1 kernel: em2: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.2="">port 0x4080-0x40bf mem 0xecfa0000-0xecfbffff irq 29 at device 8.0 on pci6 Nov 14 13:22:55 pfsense1 kernel: em2: [FILTER] Nov 14 13:22:55 pfsense1 kernel: em3: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.2="">port 0x40c0-0x40ff mem 0xecf80000-0xecf9ffff irq 30 at device 8.1 on pci6 Nov 14 13:22:55 pfsense1 kernel: em3: [FILTER] Nov 14 13:22:55 pfsense1 kernel: pcib5: <acpi host-pci="" bridge="">on acpi0 Nov 14 13:22:55 pfsense1 kernel: pci8: <acpi pci="" bus="">on pcib5 Nov 14 13:22:55 pfsense1 kernel: ips0: <ibm serveraid="" adapter="">mem 0xe4000000-0xe7ffffff irq 18 at device 2.0 on pci8 Nov 14 13:22:55 pfsense1 kernel: ips0: [ITHREAD] Nov 14 13:22:55 pfsense1 kernel: fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5 irq 6 drq 2 on acpi0 Nov 14 13:22:55 pfsense1 kernel: fdc0: [FILTER] Nov 14 13:22:55 pfsense1 kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Nov 14 13:22:55 pfsense1 kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Nov 14 13:22:55 pfsense1 kernel: uart0: [FILTER] Nov 14 13:22:55 pfsense1 kernel: atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0 Nov 14 13:22:55 pfsense1 kernel: pmtimer0 on isa0 Nov 14 13:22:55 pfsense1 kernel: orm0: <isa option="" roms="">at iomem 0xc0000-0xcafff,0xcb000-0xce7ff,0xce800-0xcffff,0xd0000-0xd17ff pnpid ORM0000 on isa0 Nov 14 13:22:55 pfsense1 kernel: sc0: <system console="">at flags 0x100 on isa0 Nov 14 13:22:55 pfsense1 kernel: sc0: VGA <16 virtual consoles, flags=0x300> Nov 14 13:22:55 pfsense1 kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Nov 14 13:22:55 pfsense1 kernel: atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 Nov 14 13:22:55 pfsense1 kernel: atkbd0: <at keyboard="">irq 1 on atkbdc0 Nov 14 13:22:55 pfsense1 kernel: kbd0 at atkbd0 Nov 14 13:22:55 pfsense1 kernel: atkbd0: [GIANT-LOCKED] Nov 14 13:22:55 pfsense1 kernel: atkbd0: [ITHREAD] Nov 14 13:22:55 pfsense1 kernel: ppc0: parallel port not found. Nov 14 13:22:55 pfsense1 kernel: p4tcc0: <cpu frequency="" thermal="" control="">on cpu0 Nov 14 13:22:55 pfsense1 kernel: p4tcc1: <cpu frequency="" thermal="" control="">on cpu1 Nov 14 13:22:55 pfsense1 kernel: p4tcc2: <cpu frequency="" thermal="" control="">on cpu2 Nov 14 13:22:55 pfsense1 kernel: p4tcc3: <cpu frequency="" thermal="" control="">on cpu3 Nov 14 13:22:55 pfsense1 kernel: Timecounters tick every 1.000 msec Nov 14 13:22:55 pfsense1 kernel: IPsec: Initialized Security Association Processing. Nov 14 13:22:55 pfsense1 kernel: usbus0: 12Mbps Full Speed USB v1.0 Nov 14 13:22:55 pfsense1 kernel: ugen0.1: <(0x1166)> at usbus0 Nov 14 13:22:55 pfsense1 kernel: uhub0: <(0x1166) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 Nov 14 13:22:55 pfsense1 kernel: acd0: CDROM <lg cd-rom="" crn-8245b="" 1.16="">at ata0-master UDMA33 Nov 14 13:22:55 pfsense1 kernel: ips0: resetting adapter, this may take up to 5 minutes Nov 14 13:22:55 pfsense1 kernel: ips0: adapter type: ServeRAID 5i II (sarasota) Nov 14 13:22:55 pfsense1 kernel: ips0: logical drives: 1 Nov 14 13:22:55 pfsense1 kernel: ips0: Logical Drive 0: RAID1 sectors: 106641408, state OK Nov 14 13:22:55 pfsense1 kernel: ipsd0: <logical drive="">on ips0 Nov 14 13:22:55 pfsense1 kernel: ipsd0: Logical Drive (52071MB) Nov 14 13:22:55 pfsense1 kernel: SMP: AP CPU #2 Launched! Nov 14 13:22:55 pfsense1 kernel: SMP: AP CPU #1 Launched! Nov 14 13:22:55 pfsense1 kernel: SMP: AP CPU #3 Launched! Nov 14 13:22:55 pfsense1 kernel: uhub0: 4 ports with 4 removable, self powered Nov 14 13:22:55 pfsense1 kernel: ugen0.2: <ibm>at usbus0 Nov 14 13:22:55 pfsense1 kernel: ukbd0: <hid kb="">on usbus0 Nov 14 13:22:55 pfsense1 kernel: kbd2 at ukbd0 Nov 14 13:22:55 pfsense1 kernel: ums0: <hid ms="">on usbus0 Nov 14 13:22:55 pfsense1 kernel: ums0: 3 buttons and [Z] coordinates ID=0 Nov 14 13:22:55 pfsense1 kernel: uhid0: <hid sys="">on usbus0 Nov 14 13:22:55 pfsense1 kernel: Trying to mount root from ufs:/dev/ipsd0s1a Nov 14 13:22:55 pfsense1 check_reload_status: reloading filter Nov 14 13:22:55 pfsense1 check_reload_status: reloading filter Nov 14 13:22:55 pfsense1 kernel: pflog0: promiscuous mode enabled Nov 14 13:22:56 pfsense1 php: : Gateways status could not be determined, considering all as up/active. Nov 14 13:22:56 pfsense1 php: : Gateways status could not be determined, considering all as up/active. Nov 14 13:22:56 pfsense1 check_reload_status: Linkup starting em1 Nov 14 13:22:56 pfsense1 kernel: vip2: INIT -> BACKUP Nov 14 13:22:56 pfsense1 kernel: vip3: INIT -> BACKUP Nov 14 13:22:56 pfsense1 kernel: em1: link state changed to UP Nov 14 13:22:56 pfsense1 kernel: vip2: 2 link states coalesced Nov 14 13:22:56 pfsense1 kernel: vip2: link state changed to DOWN Nov 14 13:22:56 pfsense1 kernel: vip3: 2 link states coalesced Nov 14 13:22:56 pfsense1 kernel: vip3: link state changed to DOWN Nov 14 13:22:56 pfsense1 check_reload_status: Linkup starting em0 Nov 14 13:22:56 pfsense1 kernel: em0: link state changed to UP Nov 14 13:22:56 pfsense1 php: : Gateways status could not be determined, considering all as up/active. Nov 14 13:22:57 pfsense1 last message repeated 3 times Nov 14 13:22:57 pfsense1 check_reload_status: Linkup starting em2 Nov 14 13:22:57 pfsense1 kernel: em2: link state changed to UP Nov 14 13:22:57 pfsense1 kernel: em2_vlan16: link state changed to UP Nov 14 13:22:57 pfsense1 kernel: em2_vlan8: link state changed to UP Nov 14 13:22:57 pfsense1 check_reload_status: Linkup starting em3 Nov 14 13:22:57 pfsense1 kernel: vip1: INIT -> BACKUP Nov 14 13:22:57 pfsense1 kernel: em3: link state changed to UP Nov 14 13:22:57 pfsense1 kernel: vip1: 2 link states coalesced Nov 14 13:22:57 pfsense1 kernel: vip1: link state changed to DOWN Nov 14 13:22:57 pfsense1 php: : Gateways status could not be determined, considering all as up/active. Nov 14 13:22:57 pfsense1 last message repeated 3 times Nov 14 13:22:59 pfsense1 kernel: vip2: link state changed to UP Nov 14 13:22:59 pfsense1 kernel: vip3: link state changed to UP Nov 14 13:22:59 pfsense1 php: : The command '/usr/local/sbin/relayd -f /var/etc/relayd.conf' returned exit code '1', the output was '/var/etc/relayd.conf:3: syntax error no redirections, nothing to do' Nov 14 13:22:59 pfsense1 php: : Removing static route for monitor 80.120.17.70 and adding a new route through <gw_aon_ip>Nov 14 13:22:59 pfsense1 apinger: Starting Alarm Pinger, apinger(50714) Nov 14 13:23:00 pfsense1 kernel: vip1: link state changed to UP Nov 14 13:23:00 pfsense1 php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was 'pfctl: DIOCADDRULE: Device busy' Nov 14 13:23:00 pfsense1 php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was 'pfctl: DIOCADDRULE: Device busy' Nov 14 13:23:01 pfsense1 php: : New alert found: There were error(s) loading the rules: pfctl: DIOCADDRULE: Device busy The line in question reads [ DIOCADDRULE]: Nov 14 13:23:01 pfsense1 php: : There were error(s) loading the rules: pfctl: DIOCADDRULE: Device busy - The line in question reads [ DIOCADDRULE]: Nov 14 13:23:03 pfsense1 apinger: ALARM: UPC_GW_ASYNC(<gw_upcasync_ip>) *** UPC_GW_ASYNCdown *** Nov 14 13:23:08 pfsense1 php: : ROUTING: add default route to <gw_upc_ip>Nov 14 13:23:09 pfsense1 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Nov 14 13:23:09 pfsense1 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Nov 14 13:23:09 pfsense1 dhcpd: All rights reserved. Nov 14 13:23:09 pfsense1 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Nov 14 13:23:09 pfsense1 dnsmasq[53490]: started, version 2.55 cachesize 10000 Nov 14 13:23:09 pfsense1 dnsmasq[53490]: compile time options: no-IPv6 GNU-getopt no-DBus I18N DHCP TFTP Nov 14 13:23:09 pfsense1 check_reload_status: updating all dyndns Nov 14 13:23:09 pfsense1 dnsmasq[53490]: reading /etc/resolv.conf Nov 14 13:23:09 pfsense1 dnsmasq[53490]: using nameserver 80.120.17.70#53 Nov 14 13:23:09 pfsense1 dnsmasq[53490]: using nameserver 213.33.99.70#53 Nov 14 13:23:09 pfsense1 dnsmasq[53490]: using nameserver 195.58.161.122#53 Nov 14 13:23:09 pfsense1 dnsmasq[53490]: using nameserver 195.58.160.194#53 Nov 14 13:23:09 pfsense1 dnsmasq[53490]: read /etc/hosts - 46 addresses Nov 14 13:23:10 pfsense1 php: : IPSEC interface is not WAN but opt1, adding static route for VPN endpoint <ipsec_endpoint1_ip>via <gw_aon_ip>Nov 14 13:23:10 pfsense1 php: : The command '/sbin/route delete -host <ipsec_endpoint1_ip>' returned exit code '1', the output was 'route: writing to routing socket: No such process delete host <ipsec_endpoint1_ip>: not in table' Nov 14 13:23:10 pfsense1 php: : IPSEC interface is not WAN but opt1, adding static route for VPN endpoint <ipsec_endpoint2_ip>via <gw_aon_ip>Nov 14 13:23:10 pfsense1 php: : The command '/sbin/route delete -host <ipsec_endpoint2_ip>' returned exit code '1', the output was 'route: writing to routing socket: No such process delete host <ipsec_endpoint2_ip>: not in table' Nov 14 13:23:10 pfsense1 php: : IPSEC interface is not WAN but opt1, adding static route for VPN endpoint <ipsec_endpoint3_ip>via <gw_aon_ip>Nov 14 13:23:10 pfsense1 php: : The command '/sbin/route delete -host <ipsec_endpoint3_ip>' returned exit code '1', the output was 'route: writing to routing socket: No such process delete host <ipsec_endpoint3_ip>: not in table' Nov 14 13:23:10 pfsense1 php: : IPSEC interface is not WAN but opt1, adding static route for VPN endpoint <ipsec_endpoint1_ip>via <gw_aon_ip>Nov 14 13:23:10 pfsense1 php: : IPSEC interface is not WAN but opt1, adding static route for VPN endpoint <ipsec_endpoint2_ip>via <gw_aon_ip>Nov 14 13:23:10 pfsense1 php: : IPSEC interface is not WAN but opt1, adding static route for VPN endpoint <ipsec_endpoint3_ip>via <gw_aon_ip>Nov 14 13:23:12 pfsense1 php: : MONITOR: UPC_GW_ASYNC has high latency, removing from routing group Nov 14 13:23:13 pfsense1 check_reload_status: reloading filter Nov 14 13:23:14 pfsense1 php: : MONITOR: UPC_GW_ASYNC has high latency, removing from routing group Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/wan-queues.rrd -t :wan:qACK:qDefault:qOthersHigh:qOthersLow N:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/wan-queuedrops.rrd -t :wan:qACK:qDefault:qOthersHigh:qOthersLow N:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/lan-queues.rrd -t :lan:qInternet:qACK:qDefault:qOthersHigh:qOthersLow:qUltraHigh N:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/lan-queuedrops.rrd -t :lan:qInternet:qACK:qDefault:qOthersHigh:qOthersLow:qUltraHigh N:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt1-queues.rrd -t :opt1:qACK:qDefault:qOthersHigh:qOthersLow:qUltraHigh N:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt1-queuedrops.rrd -t :opt1:qACK:qDefault:qOthersHigh:qOthersLow:qUltraHigh N:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt2-queues.rrd -t :opt2:qACK:qDefault:qOthersHigh:qOthersLow N:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt2-queuedrops.rrd -t :opt2:qACK:qDefault:qOthersHigh:qOthersLow N:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt3-queues.rrd -t :opt3:qInternet:qACK:qDefault:qOthersHigh:qOthersLow N:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:14 pfsense1 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt3-queuedrops.rrd -t :opt3:qInternet:qACK:qDefault:qOthersHigh:qOthersLow N:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name ''' Nov 14 13:23:15 pfsense1 php: : Creating rrd update script Nov 14 13:23:15 pfsense1 php: : Resyncing configuration for all packages. Nov 14 13:23:18 pfsense1 login: login on ttyv0 as root Nov 14 13:23:18 pfsense1 sshlockout[54463]: sshlockout v2.0 starting up Nov 14 13:23:18 pfsense1 sshlockout[54463]: sshlockout v2.0 starting up Nov 14 13:23:21 pfsense1 kernel: WARNING: pseudo-random number generator used for IPsec processing Nov 14 13:27:16 pfsense1 kernel: fxp0: link state changed to DOWN Nov 14 13:28:20 pfsense1 check_reload_status: syncing firewall Nov 14 13:28:23 pfsense1 check_reload_status: syncing firewall Nov 14 13:28:23 pfsense1 check_reload_status: reloading filter Nov 14 13:28:24 pfsense1 php: : MONITOR: UPC_GW_ASYNC has high latency, removing from routing group Nov 14 13:28:53 pfsense1 check_reload_status: syncing firewall Nov 14 13:28:56 pfsense1 check_reload_status: syncing firewall Nov 14 13:28:56 pfsense1 check_reload_status: reloading filter Nov 14 13:28:57 pfsense1 php: : MONITOR: UPC_GW_ASYNC has high latency, removing from routing group</gw_aon_ip></ipsec_endpoint3_ip></gw_aon_ip></ipsec_endpoint2_ip></gw_aon_ip></ipsec_endpoint1_ip></ipsec_endpoint3_ip></ipsec_endpoint3_ip></gw_aon_ip></ipsec_endpoint3_ip></ipsec_endpoint2_ip></ipsec_endpoint2_ip></gw_aon_ip></ipsec_endpoint2_ip></ipsec_endpoint1_ip></ipsec_endpoint1_ip></gw_aon_ip></ipsec_endpoint1_ip></gw_upc_ip></gw_upcasync_ip></gw_aon_ip></hid></hid></hid></ibm></logical></lg></cpu></cpu></cpu></cpu></at></keyboard></generic></system></isa></at></floppy></ibm></acpi></acpi></intel(r)></intel(r)></intel(r)></intel(r)></acpi></acpi></i82555></mii></intel></i82555></mii></intel></pci></pci-pci></acpi></acpi></acpi></acpi></isa></pci-isa></ohci></ohci></ata></ata></serverworks></vga-compatible></acpi></acpi></acpi></acpi></acpi></acpi></ibm></software></version></version></version></ibm></cnxt-id,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Thank you very much!
Max</gw_aon></gw_upc>
-
Update:
Though 6th Nov. snapshot already gave me the "cannot define table bogons: Device busy pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [204]: table <bogons>persist file "/etc/bogons"" error in addition to the first "pfctl: DIOCADDRULE: Device busy The line in question reads [ DIOCADDRULE]:" which appeared for me first on Oct.12th snapshot, rules and gateways were working fine as I remember.. but I could be wrong and this second error (bogons) broke it.
Couldn't test for long because this is a production machine, but I tried to edit/save some rules and AON rules, didn't have any effect though..Is there anything else I could do?
I really don't want to stick to oct 12th ;)
Thank you very much!</bogons>
-
Does anyone know what's this all about?
Anyone else besides m4rcu5 and me having this problem?Edit: on redmine I found one follow up post regarding this error: http://redmine.pfsense.org/issues/922
-
2.0-BETA4 (i386)
built on Mon Nov 15 17:03:26 EST 2010
FreeBSD 8.1-RELEASE-p1
nanobsdI get this from time to time:
There were error(s) loading the rules: pfctl: DIOCADDRULE: Device busy The line in question reads [ DIOCADDRULE]: -
After upgrading to todays snapshot, I don't get the following error anymore:
"/tmp/rules.debug:204: cannot define table bogons: Device busy pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [204]: table <bogons>persist file "/etc/bogons"I still get the same error as Clarknova though on boot.</bogons>
-
Okay, unfortunately I got
php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was '/tmp/rules.debug:198: cannot define table bogons: Device busy pfctl: Syntax error in config file: pf rules not loaded'
4 hours after upgrading to that snapshot.
Here's the snippet from rules.debug. Line 198 is in bold:
SSH lockout
block in log quick proto tcp from <sshlockout>to any port 65002 label "sshlockout"
block in quick from <virusprot>to any label "virusprot overload table"
table <bogons>persist file "/etc/bogons"
# block bogon networkshttp://www.cymru.com/Documents/bogon-bn-nonagg.txt
block in log quick on $UPC from <bogons>to any label "block bogon networks from UPC"
antispoof for em3block anything from private networks on interfaces with the option set
antispoof for $UPC
block in log quick on $UPC from 10.0.0.0/8 to any label "block private networks from wan block 10/8"
block in log quick on $UPC from 127.0.0.0/8 to any label "block private networks from wan block 127/8"
block in log quick on $UPC from 172.16.0.0/12 to any label "block private networks from wan block 172.16/12"
block in log quick on $UPC from 192.168.0.0/16 to any label "block private networks from wan block 192.168/16"$UPC is my first "WAN" interface.
I now upgraded to Sun Nov 21 02:37:38 ..</bogons></bogons></virusprot></sshlockout>
-
Any news about those DIOCADDRULE errors?
Is this something to worry about?
If someone could explain what this error is about it would be very nice to know ;)Thank you!
-
Please wait for a snapshot to come after this post and try to see if it fixes the error.
-
Using 2.0-BETA4 (amd64)
built on Mon Nov 29 23:16:42 UTC 2010Error still exists
-
Can you show me your system logs?
Possibly other info from the system? -
I'm running in a ESXi virtualized environment but from what I've read its the same error others are seeing with full installs on dedicated hardware.
Nov 29 22:55:50 kernel: VMware memory control driver initialized Nov 29 22:55:50 sshlockout[37131]: sshlockout v2.0 starting up Nov 29 22:55:50 sshlockout[37131]: sshlockout v2.0 starting up Nov 29 22:55:50 login: login on ttyv0 as root Nov 29 22:55:49 php: : Resyncing configuration for all packages. Nov 29 22:55:48 miniupnpd[21227]: Listening for NAT-PMP traffic on port 5351 Nov 29 22:55:48 miniupnpd[21227]: Listening for NAT-PMP traffic on port 5351 Nov 29 22:55:48 miniupnpd[21227]: HTTP listening on port 2189 Nov 29 22:55:48 miniupnpd[21227]: HTTP listening on port 2189 Nov 29 22:55:48 php: miniupnpd: Starting service on interface: lan Nov 29 22:55:48 php: : Creating rrd update script Nov 29 22:55:43 php: : phpDynDNS: No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Nov 29 22:55:43 php: : DynDns: Cached IP: xxx.xxx.xxx.xxx Nov 29 22:55:43 php: : DynDns: Current WAN IP: xxx.xxx.xxx.xxx Nov 29 22:55:43 php: : DynDns debug information: xxx.xxx.xxx.xxx extracted from local system. Nov 29 22:55:43 php: : DynDns: _checkIP() starting. Nov 29 22:55:43 php: : DynDns: _detectChange() starting. Nov 29 22:55:43 php: : DynDns: updatedns() starting Nov 29 22:55:43 php: : DynDns: Running updatedns() Nov 29 22:55:43 dnsmasq[56517]: read /etc/hosts - 2 addresses Nov 29 22:55:43 dnsmasq[56517]: using nameserver xxx.xxx.xxx.xxx#53 Nov 29 22:55:43 dnsmasq[56517]: using nameserver xxx.xxx.xxx.xxx#53 Nov 29 22:55:43 dnsmasq[56517]: reading /etc/resolv.conf Nov 29 22:55:43 check_reload_status: updating all dyndns Nov 29 22:55:43 dnsmasq[56517]: compile time options: IPv6 GNU-getopt no-DBus I18N DHCP TFTP Nov 29 22:55:43 dnsmasq[56517]: started, version 2.55 cachesize 10000 Nov 29 22:55:42 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Nov 29 22:55:42 dhcpd: All rights reserved. Nov 29 22:55:42 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Nov 29 22:55:42 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Nov 29 22:55:41 php: : ROUTING: change default route to xxx.xxx.xxx.xxx Nov 29 22:55:41 check_reload_status: reloading filter Nov 29 22:55:40 kernel: ovpnc3: link state changed to UP Nov 29 22:55:38 apinger: Starting Alarm Pinger, apinger(25355) Nov 29 22:55:38 php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was 'pfctl: DIOCADDRULE: Device busy' Nov 29 22:55:37 apinger: Exiting on signal 15. Nov 29 22:55:37 php: : There were error(s) loading the rules: pfctl: Duplicate signature for AIX 4.3 : File exists pfctl: Duplicate signature for AIX 4.3 : File exists pfctl: Duplicate signature for AIX 4.3 2: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 2-3: File exists pfctl: Duplicate signature for AIX 4.3 2: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 2-3: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 5.1 : File exists pfctl: Duplicate signature for AIX 5.2 : File exists pfctl: Duplicate signature for AIX 5.1-5.2 : File exists pfctl: Duplicate signature for AIX 5.1 : File exists pfctl: Duplicate signature for AIX 5.2 : File exists pfctl: Duplicate signature for AIX 5.1-5.2 : File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4 Nov 29 22:55:37 php: : New alert found: There were error(s) loading the rules: pfctl: Duplicate signature for AIX 4.3 : File exists pfctl: Duplicate signature for AIX 4.3 : File exists pfctl: Duplicate signature for AIX 4.3 2: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 2-3: File exists pfctl: Duplicate signature for AIX 4.3 2: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 2-3: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 5.1 : File exists pfctl: Duplicate signature for AIX 5.2 : File exists pfctl: Duplicate signature for AIX 5.1-5.2 : File exists pfctl: Duplicate signature for AIX 5.1 : File exists pfctl: Duplicate signature for AIX 5.2 : File exists pfctl: Duplicate signature for AIX 5.1-5.2 : File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate si Nov 29 22:55:37 php: : There were error(s) loading the rules: pfctl: DIOCADDRULE: Device busy - The line in question reads [ DIOCADDRULE]: Nov 29 22:55:37 php: : New alert found: There were error(s) loading the rules: pfctl: DIOCADDRULE: Device busy The line in question reads [ DIOCADDRULE]: Nov 29 22:55:37 php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was 'pfctl: Duplicate signature for AIX 4.3 : File exists pfctl: Duplicate signature for AIX 4.3 2: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 2-3: File exists pfctl: Duplicate signature for AIX 4.3 2: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 2-3: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 5.1 : File exists pfctl: Duplicate signature for AIX 5.2 : File exists pfctl: Duplicate signature for AIX 5.1-5.2 : File exists pfctl: Duplicate signature for AIX 5.1 : File exists pfctl: Duplicate signature for AIX 5.2 : File exists pfctl: Duplicate signature for AIX 5.1-5.2 : File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AI Nov 29 22:55:37 php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was 'pfctl: Duplicate signature for AIX 4.3 : File exists pfctl: Duplicate signature for AIX 4.3 2: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 2-3: File exists pfctl: Duplicate signature for AIX 4.3 2: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 2-3: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AIX 5.1 : File exists pfctl: Duplicate signature for AIX 5.2 : File exists pfctl: Duplicate signature for AIX 5.1-5.2 : File exists pfctl: Duplicate signature for AIX 5.1 : File exists pfctl: Duplicate signature for AIX 5.2 : File exists pfctl: Duplicate signature for AIX 5.1-5.2 : File exists pfctl: Duplicate signature for AIX 4.3 3: File exists pfctl: Duplicate signature for AI Nov 29 22:55:37 php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was '/tmp/rules.debug:59: cannot define table direct_networks: Device busy /tmp/rules.debug:85: cannot define table bogons: Device busy pfctl: Syntax error in config file: pf rules not loaded' Nov 29 22:55:37 inetd[59970]: Accessing /var/etc/inetd.conf: No such file or directory, continuing anyway. Nov 29 22:55:37 inetd[59970]: Accessing /var/etc/inetd.conf: No such file or directory, continuing anyway. Nov 29 22:55:36 apinger: Starting Alarm Pinger, apinger(35530) Nov 29 22:55:36 kernel: pflog0: promiscuous mode enabled Nov 29 22:55:36 check_reload_status: reloading filter Nov 29 22:55:36 check_reload_status: reloading filter Nov 29 22:55:36 kernel: Trying to mount root from ufs:/dev/da0s1a Nov 29 22:55:36 kernel: SMP: AP CPU #3 Launched! Nov 29 22:55:36 kernel: SMP: AP CPU #1 Launched! Nov 29 22:55:36 kernel: SMP: AP CPU #2 Launched! Nov 29 22:55:36 kernel: da0: 8192MB (16777216 512 byte sectors: 255H 63S/T 1044C) Nov 29 22:55:36 kernel: da0: Command Queueing enabled Nov 29 22:55:36 kernel: da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) Nov 29 22:55:36 kernel: da0: <vmware virtual="" disk="" 1.0="">Fixed Direct Access SCSI-2 device Nov 29 22:55:36 kernel: da0 at mpt0 bus 0 scbus0 target 0 lun 0 Nov 29 22:55:36 kernel: acd0: DVDR <vmware virtual="" ide="" cdrom="" drive="" 00000001="">at ata1-master UDMA33 Nov 29 22:55:36 kernel: IPsec: Initialized Security Association Processing. Nov 29 22:55:36 kernel: Timecounters tick every 10.000 msec Nov 29 22:55:36 kernel: ppc0: cannot reserve I/O port range Nov 29 22:55:36 kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Nov 29 22:55:36 kernel: sc0: VGA <16 virtual consoles, flags=0x300> Nov 29 22:55:36 kernel: sc0: <system console="">at flags 0x100 on isa0 Nov 29 22:55:36 kernel: orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xca000-0xcafff,0xcb000-0xcbfff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0 Nov 29 22:55:36 kernel: psm0: model IntelliMouse, device ID 3 Nov 29 22:55:36 kernel: psm0: [ITHREAD] Nov 29 22:55:36 kernel: psm0: [GIANT-LOCKED] Nov 29 22:55:36 kernel: psm0: <ps 2="" mouse="">irq 12 on atkbdc0 Nov 29 22:55:36 kernel: atkbd0: [ITHREAD] Nov 29 22:55:36 kernel: atkbd0: [GIANT-LOCKED] Nov 29 22:55:36 kernel: kbd0 at atkbd0 Nov 29 22:55:36 kernel: atkbd0: <at keyboard="">irq 1 on atkbdc0 Nov 29 22:55:36 kernel: atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0 Nov 29 22:55:36 kernel: atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0 Nov 29 22:55:36 kernel: acpi_acad0: <ac adapter="">on acpi0 Nov 29 22:55:36 kernel: pci34: <acpi pci="" bus="">on pcib34 Nov 29 22:55:36 kernel: pcib34: <acpi pci-pci="" bridge="">at device 24.7 on pci0 Nov 29 22:55:36 kernel: pci33: <acpi pci="" bus="">on pcib33 Nov 29 22:55:36 kernel: pcib33: <acpi pci-pci="" bridge="">at device 24.6 on pci0 Nov 29 22:55:36 kernel: pci32: <acpi pci="" bus="">on pcib32 Nov 29 22:55:36 kernel: pcib32: <acpi pci-pci="" bridge="">at device 24.5 on pci0 Nov 29 22:55:36 kernel: pci31: <acpi pci="" bus="">on pcib31 Nov 29 22:55:36 kernel: pcib31: <acpi pci-pci="" bridge="">at device 24.4 on pci0 Nov 29 22:55:36 kernel: pci30: <acpi pci="" bus="">on pcib30 Nov 29 22:55:36 kernel: pcib30: <acpi pci-pci="" bridge="">at device 24.3 on pci0 Nov 29 22:55:36 kernel: pci29: <acpi pci="" bus="">on pcib29 Nov 29 22:55:36 kernel: pcib29: <acpi pci-pci="" bridge="">at device 24.2 on pci0 Nov 29 22:55:36 kernel: pci28: <acpi pci="" bus="">on pcib28 Nov 29 22:55:36 kernel: pcib28: <acpi pci-pci="" bridge="">at device 24.1 on pci0 Nov 29 22:55:36 kernel: pci27: <acpi pci="" bus="">on pcib27 Nov 29 22:55:36 kernel: pcib27: <acpi pci-pci="" bridge="">at device 24.0 on pci0 Nov 29 22:55:36 kernel: pci26: <acpi pci="" bus="">on pcib26 Nov 29 22:55:36 kernel: pcib26: <acpi pci-pci="" bridge="">at device 23.7 on pci0 Nov 29 22:55:36 kernel: pci25: <acpi pci="" bus="">on pcib25 Nov 29 22:55:36 kernel: pcib25: <acpi pci-pci="" bridge="">at device 23.6 on pci0 Nov 29 22:55:36 kernel: pci24: <acpi pci="" bus="">on pcib24 Nov 29 22:55:36 kernel: pcib24: <acpi pci-pci="" bridge="">at device 23.5 on pci0 Nov 29 22:55:36 kernel: pci23: <acpi pci="" bus="">on pcib23 Nov 29 22:55:36 kernel: pcib23: <acpi pci-pci="" bridge="">at device 23.4 on pci0 Nov 29 22:55:36 kernel: pci22: <acpi pci="" bus="">on pcib22 Nov 29 22:55:36 kernel: pcib22: <acpi pci-pci="" bridge="">at device 23.3 on pci0 Nov 29 22:55:36 kernel: pci21: <acpi pci="" bus="">on pcib21 Nov 29 22:55:36 kernel: pcib21: <acpi pci-pci="" bridge="">at device 23.2 on pci0 Nov 29 22:55:36 kernel: pci20: <acpi pci="" bus="">on pcib20 Nov 29 22:55:36 kernel: pcib20: <acpi pci-pci="" bridge="">at device 23.1 on pci0 Nov 29 22:55:36 kernel: pci19: <acpi pci="" bus="">on pcib19 Nov 29 22:55:36 kernel: pcib19: <acpi pci-pci="" bridge="">at device 23.0 on pci0 Nov 29 22:55:36 kernel: pci18: <acpi pci="" bus="">on pcib18 Nov 29 22:55:36 kernel: pcib18: <acpi pci-pci="" bridge="">at device 22.7 on pci0 Nov 29 22:55:36 kernel: pci17: <acpi pci="" bus="">on pcib17 Nov 29 22:55:36 kernel: pcib17: <acpi pci-pci="" bridge="">at device 22.6 on pci0 Nov 29 22:55:36 kernel: pci16: <acpi pci="" bus="">on pcib16 Nov 29 22:55:36 kernel: pcib16: <acpi pci-pci="" bridge="">at device 22.5 on pci0 Nov 29 22:55:36 kernel: pci15: <acpi pci="" bus="">on pcib15 Nov 29 22:55:36 kernel: pcib15: <acpi pci-pci="" bridge="">at device 22.4 on pci0 Nov 29 22:55:36 kernel: pci14: <acpi pci="" bus="">on pcib14 Nov 29 22:55:36 kernel: pcib14: <acpi pci-pci="" bridge="">at device 22.3 on pci0 Nov 29 22:55:36 kernel: pci13: <acpi pci="" bus="">on pcib13 Nov 29 22:55:36 kernel: pcib13: <acpi pci-pci="" bridge="">at device 22.2 on pci0 Nov 29 22:55:36 kernel: pci12: <acpi pci="" bus="">on pcib12 Nov 29 22:55:36 kernel: pcib12: <acpi pci-pci="" bridge="">at device 22.1 on pci0 Nov 29 22:55:36 kernel: pci11: <acpi pci="" bus="">on pcib11 Nov 29 22:55:36 kernel: pcib11: <acpi pci-pci="" bridge="">at device 22.0 on pci0 Nov 29 22:55:36 kernel: pci10: <acpi pci="" bus="">on pcib10 Nov 29 22:55:36 kernel: pcib10: <acpi pci-pci="" bridge="">at device 21.7 on pci0 Nov 29 22:55:36 kernel: pci9: <acpi pci="" bus="">on pcib9 Nov 29 22:55:36 kernel: pcib9: <acpi pci-pci="" bridge="">at device 21.6 on pci0 Nov 29 22:55:36 kernel: pci8: <acpi pci="" bus="">on pcib8 Nov 29 22:55:36 kernel: pcib8: <acpi pci-pci="" bridge="">at device 21.5 on pci0 Nov 29 22:55:36 kernel: pci7: <acpi pci="" bus="">on pcib7 Nov 29 22:55:36 kernel: pcib7: <acpi pci-pci="" bridge="">at device 21.4 on pci0 Nov 29 22:55:36 kernel: pci6: <acpi pci="" bus="">on pcib6 Nov 29 22:55:36 kernel: pcib6: <acpi pci-pci="" bridge="">at device 21.3 on pci0 Nov 29 22:55:36 kernel: pci5: <acpi pci="" bus="">on pcib5 Nov 29 22:55:36 kernel: pcib5: <acpi pci-pci="" bridge="">at device 21.2 on pci0 Nov 29 22:55:36 kernel: pci4: <acpi pci="" bus="">on pcib4 Nov 29 22:55:36 kernel: pcib4: <acpi pci-pci="" bridge="">at device 21.1 on pci0 Nov 29 22:55:36 kernel: pci3: <acpi pci="" bus="">on pcib3 Nov 29 22:55:36 kernel: pcib3: <acpi pci-pci="" bridge="">at device 21.0 on pci0 Nov 29 22:55:36 kernel: em1: [FILTER] Nov 29 22:55:36 kernel: em1: Memory Access and/or Bus Master bits were not set! Nov 29 22:55:36 kernel: em1: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0x2040-0x207f mem 0xd8940000-0xd895ffff,0xd8910000-0xd891ffff irq 19 at device 1.0 on pci2 Nov 29 22:55:36 kernel: em0: [FILTER] Nov 29 22:55:36 kernel: em0: Memory Access and/or Bus Master bits were not set! Nov 29 22:55:36 kernel: em0: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3="">port 0x2000-0x203f mem 0xd8920000-0xd893ffff,0xd8900000-0xd890ffff irq 18 at device 0.0 on pci2 Nov 29 22:55:36 kernel: pci2: <acpi pci="" bus="">on pcib2 Nov 29 22:55:36 kernel: pcib2: <acpi pci-pci="" bridge="">at device 17.0 on pci0 Nov 29 22:55:36 kernel: mpt0: MPI Version=1.2.0.0 Nov 29 22:55:36 kernel: mpt0: [ITHREAD] Nov 29 22:55:36 kernel: mpt0: <lsilogic 1030="" ultra4="" adapter="">port 0x1400-0x14ff mem 0xd8820000-0xd883ffff,0xd8800000-0xd881ffff irq 17 at device 16.0 on pci0 Nov 29 22:55:36 kernel: vgapci0: <vga-compatible display="">port 0x10d0-0x10df mem 0xd4000000-0xd7ffffff,0xd8000000-0xd87fffff irq 16 at device 15.0 on pci0 Nov 29 22:55:36 kernel: pci0: <base peripheral=""> at device 7.7 (no driver attached) Nov 29 22:55:36 kernel: pci0: <bridge>at device 7.3 (no driver attached) Nov 29 22:55:36 kernel: ata1: [ITHREAD] Nov 29 22:55:36 kernel: ata1: <ata 1="" channel="">on atapci0 Nov 29 22:55:36 kernel: ata0: [ITHREAD] Nov 29 22:55:36 kernel: ata0: <ata 0="" channel="">on atapci0 Nov 29 22:55:36 kernel: atapci0: <intel piix4="" udma33="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10c0-0x10cf at device 7.1 on pci0 Nov 29 22:55:36 kernel: isa0: <isa bus="">on isab0 Nov 29 22:55:36 kernel: isab0: <pci-isa bridge="">at device 7.0 on pci0 Nov 29 22:55:36 kernel: pci1: <acpi pci="" bus="">on pcib1 Nov 29 22:55:36 kernel: pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0 Nov 29 22:55:36 kernel: pci0: <acpi pci="" bus="">on pcib0 Nov 29 22:55:36 kernel: pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 Nov 29 22:55:36 kernel: cpu3: <acpi cpu="">on acpi0 Nov 29 22:55:36 kernel: cpu2: <acpi cpu="">on acpi0 Nov 29 22:55:36 kernel: cpu1: <acpi cpu="">on acpi0 Nov 29 22:55:36 kernel: cpu0: <acpi cpu="">on acpi0 Nov 29 22:55:36 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 Nov 29 22:55:36 kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 Nov 29 22:55:36 kernel: acpi0: Power Button (fixed) Nov 29 22:55:36 kernel: acpi0: [ITHREAD] Nov 29 22:55:36 kernel: acpi0: <intel 440bx="">on motherboard Nov 29 22:55:36 kernel: padlock0: No ACE support. Nov 29 22:55:36 kernel: cryptosoft0: <software crypto="">on motherboard Nov 29 22:55:36 kernel: kbd1 at kbdmux0 Nov 29 22:55:36 kernel: wlan: mac acl policy registered Nov 29 22:55:36 kernel: ioapic0 <version 1.1="">irqs 0-23 on motherboard Nov 29 22:55:36 kernel: MADT: Forcing active-low polarity and level trigger for SCI Nov 29 22:55:36 kernel: cpu3 (AP): APIC ID: 3 Nov 29 22:55:36 kernel: cpu2 (AP): APIC ID: 2 Nov 29 22:55:36 kernel: cpu1 (AP): APIC ID: 1 Nov 29 22:55:36 kernel: cpu0 (BSP): APIC ID: 0 Nov 29 22:55:36 kernel: FreeBSD/SMP: 4 package(s) x 1 core(s) Nov 29 22:55:36 kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Nov 29 22:55:36 kernel: ACPI APIC Table: <ptltd apic="">Nov 29 22:55:36 kernel: avail memory = 1014796288 (967 MB) Nov 29 22:55:36 kernel: real memory = 1073741824 (1024 MB) Nov 29 22:55:36 kernel: TSC: P-state invariant Nov 29 22:55:36 kernel: AMD Features2=0x1 <lahf>Nov 29 22:55:36 kernel: AMD Features=0x20100800 <syscall,nx,lm>Nov 29 22:55:36 kernel: Features2=0x80082201<sse3,ssse3,cx16,sse4.1,<b31>> Nov 29 22:55:36 kernel: Features=0xfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss>Nov 29 22:55:36 kernel: Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10 Nov 29 22:55:36 kernel: CPU: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz (2665.84-MHz K8-class CPU) Nov 29 22:55:36 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Nov 29 22:55:36 kernel: sullrich@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64 Nov 29 22:55:36 kernel: FreeBSD 8.1-RELEASE-p1 #1: Mon Nov 29 23:14:41 UTC 2010 Nov 29 22:55:36 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Nov 29 22:55:36 kernel: The Regents of the University of California. All rights reserved. Nov 29 22:55:36 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Nov 29 22:55:36 kernel: Copyright (c) 1992-2010 The FreeBSD Project.</fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss></sse3,ssse3,cx16,sse4.1,<b31></syscall,nx,lm></lahf></ptltd></version></software></intel></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></pci-isa></isa></intel></ata></ata></bridge></vga-compatible></lsilogic></acpi></acpi></intel(r)></intel(r)></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></ac></at></keyboard></at></ps></isa></system></generic></vmware></vmware> -
Running latest version - updated about 20 mins ago
Dec 1 08:00:22 php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was 'pfctl: DIOCADDRULE: Device busy'
Dec 1 08:00:17 inetd[23098]: /var/etc/inetd.conf: No such file or directory
Dec 1 08:00:17 inetd[23098]: /var/etc/inetd.conf: No such file or directory
Dec 1 08:00:16 check_reload_status: reloading filter
Dec 1 08:00:16 check_reload_status: syncing firewall
Dec 1 08:00:16 check_reload_status: reloading filter
Dec 1 08:00:15 php: /pkg_edit.php: Reloading Squid for configuration syncStill here - but everything seems to be running OK?
Regards
Andrew
-
Are these errors still there if you upgrade to one of the latest snapshots?
-
Hi Ermal,
Unfortunately the error is still present on snapshot Sat Dec 4 01:44:52 EST 2010 (i386) and pops up directly after boot.
Sorry :(
-
When the snapshot that is currently building is done, try that one. There's something in there that might fix this.
-
2.0-BETA4 (i386)
built on Sun Dec 5 07:23:23 EST 2010
Platform nanobsd (1g)
uptime 00:06So far so good :)
-
Yes, looking good here as well.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.