Kernel panic 4-5 Nov (i386)

eri--

Hmmm sorry i thought i had pushed the patch to repo!
Just did though try with next snaps.

jlepthien

Is this probably the same issue that hits me here: http://forum.pfsense.org/index.php/topic,30465.0.html

mbartosch

Hi,

@ermal:

Hmmm sorry i thought i had pushed the patch to repo!
Just did though try with next snaps.

just to give a quick head-up: I have tried the latest snapshot and it seems to have fixed the problem. No kernel panic yes with extensive VLAN on LAGG interfaces config fiddling (but no actual traffic over these yet).

Thanks for fixing this,

Martin

bEsTiAn

same here
uptime 2 hours and increasing :)

thanks a lot once more for the hard and continuous work

jlepthien

Still not possible for me to add my second wireless interface…

See http://forum.pfsense.org/index.php/topic,30465.0.html

Still rebooting then...

eri--

Go over to your thread jlepthien do not hijack this one.

jlepthien

Well, doesn't this look kinda the same problem? And since you are the one fixing this I thought you might be interesting. If you do not want the info on bugs I'll happily install 1.2.3 again and leave the testing up to you…

CryoGenID

Unfortunately, I am still fighting with the kernel panic :'( :'( :'( :'(

I had hopefully upgraded to "Sat Nov 27 03:13:22 EST 2010 "-Build via USB-Stick, which worked pretty fine.
Today, I tried to use the built-in update feature and… BANG! Kernel-Panic (Fatal Trap 12), see attached screenshot...
(the screenshot is from an older build, but the error is still the same)

ermal, are you still fighting this problem? :-)

Hopefully there will be a solution soon :)

Best regards,

Christian

pfSense_ERROR.jpg_thumb

eri--

without a backtrace i cannot say that this is related to this.

FisherKing

I tested both the 27th and 29th snapshots, doing an upgrade to the 27th and then a clean install for the 29th. Kernel panic still pops up for me under the same conditions as before. Oddly, the panic doesn't happen until after the update / install has been in place for a while (1-4 hours?) If I install an update, both GUI and fetch and will work for a bit, then a couple hours later, I run fetch from the console or log into the GUI again and it bonks almost immediately.

I'll get a current backtrace for you in the next hour or two.

FisherKing

Ok - here's the panic and back trace from the 11/29 build.


FreeBSD/i386 (xxxxxx.xxx) (ttyu0)

login: root
Password:
# fetch http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_HEAD/update
s/pfSense-Full-Update-2.0-BETA4-20101129-2231.tgz
Kernel page fault with the following non-sleepable locks held:
exclusive sleep mutex fxp0 (network driver) r = 0 (0xc36de018) locked @ /usr/pfS
ensesrc/src/sys/kern/kern_mutex.c:147
KDB: stack backtrace:
X_db_sym_numargs(c0ea7a7e,c3304a4c,c0a33fb5,93,0,...) at X_db_sym_numargs+0x146
kdb_backtrace(93,0,ffffffff,c144e8a4,c3304a84,...) at kdb_backtrace+0x29
witness_display_spinlock(c0ea9f96,c3304a98,4,1,0,...) at witness_display_spinloc
k+0x75
witness_warn(5,0,c0ee832e,1,c35ab7f8,...) at witness_warn+0x20d
trap(c3304b24) at trap+0x19e
alltraps(c36e6100,dedeadc0,c36e6100,c36e6100,c3304bac,...) at alltraps+0x1b
m_tag_delete_chain(c36e6100,0,df,0,c36de000,...) at m_tag_delete_chain+0x3f
reallocf(c36e6100,100,0,9e3,c0ea29ae,...) at reallocf+0x8a5
uma_zfree_arg(c1d7e380,c36e6100,0,c36df1f0,c3304c20,...) at uma_zfree_arg+0x29
m_freem(c36e6100,c36e4d40,8,c36de000,c36cc800,...) at m_freem+0x43
fwohci_init(c36de018,4,c0e63eff,82a,c36de018,...) at fwohci_init+0x545c
fwohci_init(c36de000,1,c0ea5a5d,189,c130de98,...) at fwohci_init+0x7a25
softclock(c130de60,c3304cc8,c09dfff4,c1311c00,c35d45b8,...) at softclock+0x24a
intr_event_execute_handlers(c35ab7f8,c35d4580,c0e9f7b8,533,c35d45f0,...) at intr
_event_execute_handlers+0x125
intr_event_add_handler(c35aa110,c3304d38,c0e9f51d,344,c35ab7f8,...) at intr_even
t_add_handler+0x42f
fork_exit(c09c8da0,c35aa110,c3304d38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc3304d70, ebp = 0 ---

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0xdedeadc0
fault code              = supervisor read, page not present
instruction pointer     = 0x20:0xc0a53258
stack pointer           = 0x28:0xc3304b64
frame pointer           = 0x28:0xc3304b74
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 12 (swi4: clock)
[thread]
Stopped at      m_tag_delete+0x48:      movl    0(%ecx),%eax
db> lock order reversal: (Giant after non-sleepable)
 1st 0xc36de018 fxp0 (network driver) @ /usr/pfSensesrc/src/sys/kern/kern_mutex.
c:147
 2nd 0xc130d110 Giant (Giant) @ /usr/pfSensesrc/src/sys/dev/usb/input/ukbd.c:170
4
KDB: stack backtrace:
X_db_sym_numargs(c0ea7a7e,c330489c,c0a33fb5,c0a24b9b,c0eaa9ea,...) at X_db_sym_n
umargs+0x146
kdb_backtrace(c0a24b9b,c0eaa9ea,c355f040,c355e1a0,c33048f8,...) at kdb_backtrace
+0x29
witness_display_spinlock(c0eaa9ea,c130d110,c0eceae9,c355e1a0,c0e93752,...) at wi
tness_display_spinlock+0x75
witness_checkorder(c130d110,9,c0e93752,6a8,0,...) at witness_checkorder+0x839
_mtx_lock_flags(c130d110,0,c0e93752,6a8,c392ea80,...) at _mtx_lock_flags+0xc4
ucom_attach(c3c4b000,1,c130bd68,c1309f20,c3304978,...) at ucom_attach+0x1c08
ixgbe_init_fdir_perfect_82599(c35b2c00,1,c1309fa4,c130bd68,1,...) at ixgbe_init_
fdir_perfect_82599+0x6456
sc_attach_unit(c122daa0,78,c3304990,c09b0166,c33049b0,...) at sc_attach_unit+0x5
23
cncheckc(c33049b0,c0526fe5,c0e3bd0d,c0528290,c33049ac,...) at cncheckc+0x48
cngetc(c0e3bd0d,c0528290,c33049ac,c33049e8,1,...) at cngetc+0x16
db_readline(c12dad60,78,c33049cc,c0525c26,c0e3bd0d,...) at db_readline+0x75
db_read_line(c0e3bd0d,c3304a20,c0527add,c0ee41e5,0,...) at db_read_line+0x1a
db_command_loop(c0ee41e5,0,c33049f4,c0e0cf9d,0,...) at db_command_loo3304b24,...
) at 0xed
kdb_trap(c,0,c3304
db>
db> bt
Tracing pid 12 tid 64007 td 0xc35ad280
m_tag_delete(c36e6100,dedeadc0,c36e6100,c36e6100,c3304bac,...) at m_tag_delete+0
x48
m_tag_delete_chain(c36e6100,0,df,0,c36de000,...) at m_tag_delete_chain+0x3f
reallocf(c36e6100,100,0,9e3,c0ea29ae,...) at reallocf+0x8a5
uma_zfree_arg(c1d7e380,c36e6100,0,c36df1f0,c3304c20,...) at uma_zfree_arg+0x29
m_freem(c36e6100,c36e4d40,8,c36de000,c36cc800,...) at m_freem+0x43
fwohci_init(c36de018,4,c0e63eff,82a,c36de018,...) at fwohci_init+0x545c
fwohci_init(c36de000,1,c0ea5a5d,189,c130de98,...) at fwohci_init+0x7a25
softclock(c130de60,c3304cc8,c09dfff4,c1311c00,c35d45b8,...) at softclock+0x24a
intr_event_execute_handlers(c35ab7f8,c35d4580,c0e9f7b8,533,c35d45f0,...) at intr
_event_execute_handlers+0x125
intr_event_add_handler(c35aa110,c3304d38,c0e9f51d,344,c35ab7f8,...) at intr_even
t_add_handler+0x42f
fork_exit(c09c8da0,c35aa110,c3304d38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc3304d70, ebp = 0 ---
db>

I noticed some KDB: stack backtrace messages in the boot up sequence also, so I've included those as well.

[code]
Configuring firewall.....lock order reversal:
 1st 0xc12d8a0c pf task mtx (pf task mtx) @ /usr/pfSensesrc/src/sys/contrib/pf/n
et/pf_ioctl.c:1397
 2nd 0xc147a864 ifnet_rw (ifnet_rw) @ /usr/pfSensesrc/src/sys/net/if.c:2055
KDB: stack backtrace:
X_db_sym_numargs(c0ea7a7e,d43de9c0,c0a33fb5,c0a24b9b,c0eaa9ea,...) at X_db_sym_n
umargs+0x146
kdb_backtrace(c0a24b9b,c0eaa9ea,c3565638,c35627e8,d43dea1c,...) at kdb_backtrace
+0x29
witness_display_spinlock(c0eaa9ea,c147a864,c0eb3e25,c35627e8,c0eb3e04,...) at wi
tness_display_spinlock+0x75
witness_checkorder(c147a864,1,c0eb3e04,807,0,...) at witness_checkorder+0x839
_rw_rlock(c147a864,c0eb3e04,807,c392e930,3,...) at _rw_rlock+0x9c
ifunit(c392e930,0,c0e3ab59,575,c0eb2f6d,...) at ifunit+0x27
pfioctl(c3923500,c0104414,c392e930,3,c3c37780,...) at pfioctl+0x2724
dev2udev(c3c62888,c0104414,c392e930,c35a8400,c3c37780,...) at dev2udev+0x898
kern_ioctl(c3c37780,8,c0104414,c392e930,1a2d860,...) at kern_ioctl+0x1fd
ioctl(c3c37780,d43decf8,c0ee8261,c0ec0326,c3c3ad48,...) at ioctl+0x134
syscall(d43ded38) at syscall+0x220
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (54, FreeBSD ELF32, ioctl), eip = 0x281e0533, esp = 0xbfbfdd9c, ebp
= 0xbfbfddd8 ---
.done.
Starting PFLOG...done.
Setting up gateway monitors...No matching processes were found
done.
Synchronizing user settings...lock order reversal:
 1st 0xcc04c260 bufwait (bufwait) @ /usr/pfSensesrc/src/sys/kern/vfs_bio.c:2559
 2nd 0xc3c27000 dirhash (dirhash) @ /usr/pfSensesrc/src/sys/ufs/ufs/ufs_dirhash.
c:285
KDB: stack backtrace:
X_db_sym_numargs(c0ea7a7e,d44187c0,c0a33fb5,c0a24b9b,c0eaa9ea,...) at X_db_sym_n
umargs+0x146
kdb_backtrace(c0a24b9b,c0eaa9ea,c3561fc8,c3565ec0,d441881c,...) at kdb_backtrace
+0x29
witness_display_spinlock(c0eaa9ea,c3c27000,c0ed4887,c3565ec0,c0ed4515,...) at wi
tness_display_spinlock+0x75
witness_checkorder(c3c27000,9,c0ed4515,11d,0,...) at witness_checkorder+0x839
_sx_xlock(c3c27000,0,c0ed4515,11d,c3c59d24,...) at _sx_xlock+0x85
ufsdirhash_enduseful(cc04c200,d4418944,34,cc1833e8,d44188ec,...) at ufsdirhash_e
nduseful+0x2f5
ufsdirhash_add(c3c59d24,d4418944,3e8,d44188d8,d44188dc,...) at ufsdirhash_add+0x
13
ufs_direnter(c3957648,c3e55c90,d4418944,d4418bd4,0,...) at ufs_direnter+0x729
ufs_itimes(d4418bd4,0,d4418b30,d4418a8c,c0dba8d5,...) at ufs_itimes+0x14bd
ufs_itimes(d4418b30,d4418b48,0,0,d4418ba8,...) at ufs_itimes+0x17b0
VOP_CREATE_APV(c12bd740,d4418b30,d4418bd4,d4418ac8,0,...) at VOP_CREATE_APV+0xa5

vn_open_cred(d4418ba8,d4418c5c,1a4,0,c35a8400,...) at vn_open_cred+0x215
vn_open(d4418ba8,d4418c5c,1a4,c3c63818,281df000,...) at vn_open+0x3b
kern_openat(c3d31280,ffffff9c,bfbfd2f8,0,603,...) at kern_openat+0x125
kern_open(c3d31280,bfbfd2f8,0,602,1a4,...) at kern_open+0x35
open(c3d31280,d4418cf8,c,c3d31280,c3c3cd48,...) at open+0x30
syscall(d4418d38) at syscall+0x220
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (5, FreeBSD ELF32, open), eip = 0x281a7a83, esp = 0xbfbfd2bc, ebp =
0xbfbfd708 ---
done.
Starting webConfigurator...done.
Configuring CRON...done.
Starting OpenNTP time client...done.
lock order reversal:
 1st 0xc3e5edf4 ufs (ufs) @ /usr/pfSensesrc/src/sys/kern/vfs_mount.c:1058
 2nd 0xc3e848b8 devfs (devfs) @ /usr/pfSensesrc/src/sys/kern/vfs_subr.c:2090
KDB: stack backtrace:
X_db_sym_numargs(c0ea7a7e,d4455800,c0a33fb5,c0a24b9b,c0eaa9ea,...) at X_db_sym_n
umargs+0x146
kdb_backtrace(c0a24b9b,c0eaa9ea,c3565e58,c3565d88,d445585c,...) at kdb_backtrace
+0x29
witness_display_spinlock(c0eaa9ea,c3e848b8,c0e96afc,c3565d88,c0eb1da5,...) at wi
tness_display_spinlock+0x75
witness_checkorder(c3e848b8,9,c0eb1da5,82a,0,...) at witness_checkorder+0x839
__lockmgr_args(c3e848b8,80100,c3e848d4,0,0,...) at __lockmgr_args+0x7f5
vop_stdlock(d4455978,c0a33d5b,c0e96d43,80100,c3e84860,...) at vop_stdlock+0x62
VOP_LOCK1_APV(c1292060,d4455978,c3dea5a4,c12d68e0,c3e84860,...) at VOP_LOCK1_APV
+0xb5
_vn_lock(c3e84860,80100,c0eb1da5,82a,8,...) at _vn_lock+0x5e
vget(c3e84860,80100,c3dea500,15e,c0e96c5a,...) at vget+0xb9
devfs_allocv(c3ddf880,c3c4f284,d4455a10,9d,c147a63c,...) at devfs_allocv+0x102
devfs_rules_apply(c3c4f284,80000,d4455c30,430,0,...) at devfs_rules_apply+0x14a
vfs_donmount(c3dea500,0,c3ddf980,c3ddf980,bfbfde09,...) at vfs_donmount+0x14c2
nmount(c3dea500,d4455cf8,c,c3dea500,c3e817f8,...) at nmount+0x75
syscall(d4455d38) at syscall+0x220
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (378, FreeBSD ELF32, nmount), eip = 0x280ee5db, esp = 0xbfbfdddc, eb
p = 0xbfbfe338 ---
Starting DHCP service...done.
Starting DNS forwarder...done.
Starting captive portal... load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
done
Configuring firewall......done.
Generating RRD graphs...done.
Starting CRON... done.
Executing rc.d items...
 Starting /usr/local/etc/rc.d/*.sh...done.
Bootup complete
[/code]

[/thread]

eri--

Can you please test the new snapshots and see if this is fixed?

FisherKing

Will do. Thanks ermal!

Do you believe the update made it into the current builder run (looks like it started 10:40am EST), or do I need to wait for the build after this?

Michael Sh.

pfSense-Full-Update-2.0-BETA4-20101203-2137.tgz – 5 hours - flight normal. I hope further problems it will not be.

Thanks!

FisherKing

Ok, I've done several tests, need to do a couple more, but here's what I've discovered so far.

It appears that the GUI triggered panic may be cleared up. I'm still able to trigger a panic by calling fetch from the console under specific configuration. It appears to become a problem when CaptivePortal is enabled even though I'm not working from or through the CP interface. I'm not sure which feature in CP is the trigger, so I need to do a little more testing.

Since this thread was more related to the GUI caused kernel panic I suggest we mark this one as solved and I'll start a new thread for the CP related kernel panic once I've narrowed it down.

Ermal - Thanks again for tracking this down!

CryoGenID

Unfortunately, it still doesn't work for me :-(
I just tried the December 5 Snapshot but I still get a panic when trying to update from the GUI…
I will try the most current snapshot tomorrow, just wanted to let you know ;D

Best regards,

Christian

jimp

Trying anything but the most current snapshot would undoubtedly be problematic.

CryoGenID

Update:
Tried the newest snapshot (20.12.2010) but I still get the kernel panic when I try the online update via GUI :-(

Could I do s.th. to help you to figure this problem out?

Thanks and best regards,

Christian

FisherKing

Are you running captive portal?

CryoGenID

PJ2,

thanks for your reply.
Actually yes, I have a CP set up… Do I have to deactivate it?

Best regards,

Christian