Traffic shaper wizard issue (i386)
-
Tried to use the traffic shaper wizard to set up that with VOIP. I used the 1 Lan/Multi Wan wizard.
Version is 2.0-BETA4 (i386) built on Sat Nov 27 03:13:22 EST 2010When i reach "Finish" the wizard jumps back to the VOIP-entry.
I use an iphone as VOIP-Adapter. It gets an IP via DHCP, has an alias. I tried the wizard with the IP of that phone, same as its alias-name. Nothing worked.
I tried with all 4 Provider-entries, same result.
Is this an error of mine or a bug i found?Here a screenie of the page:
-
it is a bug same for me also.
-
Can you paste here the contents in config.xml of <ezshaper>tags?
Usually that is supposed to happen when the bandwidth in the Voip section is set too high and the wizard should show a message when redirecting there!</ezshaper>
-
Here we go:
<ezshaper><step1><numberofconnections>1</numberofconnections></step1>
<step3><local0download><local0downloadspeed>
<conn0upload><conn0uploadspeed><download><downloadspeed></downloadspeed></download></conn0uploadspeed></conn0upload></local0downloadspeed></local0download></step3>
<step4><enable>on</enable>
<bandwidthunit>%</bandwidthunit><address>win2000</address>
<bandwidth>1</bandwidth></step4>
<step7><enable>on</enable>
<msrdp>H</msrdp>
<vnc>H</vnc>
<appleremotedesktop>H</appleremotedesktop>
<pcanywhere>D</pcanywhere>
<irc>L</irc>
<jabber>L</jabber>
<icq>L</icq>
<aolinstantmessenger>L</aolinstantmessenger>
<msnmessenger>L</msnmessenger>
<teamspeak>L</teamspeak>
<pptp>D</pptp>
<ipsec>H</ipsec>
<streamingmp3>D</streamingmp3>
<rtsp>D</rtsp>
<http>H</http>
<smtp>L</smtp>
<pop3>L</pop3>
<imap>L</imap>
<lotusnotes>L</lotusnotes>
<dns>H</dns>
<icmp>H</icmp>
<smb>D</smb>
<snmp>H</snmp>
<mysqlserver>H</mysqlserver>
<nntp>D</nntp>
<cvsup>D</cvsup>
<slingbox>D</slingbox>
<hbci>D</hbci></step7>
<step5><enable>on</enable>
<p2pcatchall>on</p2pcatchall>
<bandwidth>30</bandwidth>
<bandwidthunit>%</bandwidthunit>
<bittorrent>on</bittorrent>
<buddyshare>on</buddyshare>
<cutemx>on</cutemx>
<dcplusplus>on</dcplusplus>
<dcc>on</dcc>
<directconnect>on</directconnect>
<directfileexpress>on</directfileexpress>
<edonkey2000>on</edonkey2000>
<fasttrack>on</fasttrack>
<gnutella>on</gnutella>
<grouper>on</grouper>
<hotcomm>on</hotcomm>
<hotlineconnect>on</hotlineconnect>
<imesh>on</imesh>
<napster>on</napster>
<opennap>on</opennap>
<scour>on</scour>
<shareaza>on</shareaza>
<songspy>on</songspy>
<winmx>on</winmx>
<aimster>on</aimster></step5>
<step2><local0downloadscheduler>HFSC</local0downloadscheduler>
<local0interface>lan</local0interface>
<conn0uploadscheduler>HFSC</conn0uploadscheduler>
<conn0upload>10</conn0upload>
<conn0uploadspeed>Mb</conn0uploadspeed>
<conn0download>100</conn0download>
<conn0downloadspeed>Mb</conn0downloadspeed>
<conn0interface>wan</conn0interface></step2></ezshaper>Looks as if no VOIP-entry is generated.
-
I am sorry but it works for me.
So please upgrade. -
Did an upgrade today and the error still exists. No change in behaviour.
Difference to before is that all in earlier retries entered values at all pages were present except the LAN download-entry at the VOIP-page. This value was missing.
Hope that helps finding the bug… -
For me is the same. It jump to voip step. After 2-3 times try it stay in empty page. But when i go to recheck all the value from games, torrents and application priority unchecked.
-
I had a similar issue a few weeks ago, this sounds somewhat similar: http://forum.pfsense.org/index.php/topic,30122.msg156006.html
I haven't tried since to configure the shaper, but I never did get it working then.
-
Exact same problem in the current snapshot - all wizards appear to work until the last screen - and all yu get is blank and you have to enter URL by hand to continue. Queues appear to exist but all traffic takes the default queue.
Log shows
Dec 3 08:53:28 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/wan-queuedrops.rrd -t :wan:qInternet:qACK:qDefault:qP2P:qOthersHigh:qOthersLow N:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name '''
Dec 3 08:53:28 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/wan-queues.rrd -t :wan:qInternet:qACK:qDefault:qP2P:qOthersHigh:qOthersLow N:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name '''
Dec 3 08:53:28 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/lan-queuedrops.rrd -t :lan:qInternet:qACK:qDefault:qP2P:qOthersHigh:qOthersLow N:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name '''
Dec 3 08:53:28 php: : The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/lan-queues.rrd -t :lan:qInternet:qACK:qDefault:qP2P:qOthersHigh:qOthersLow N:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: unknown DS name '''Regards
Andrew
-
Nop. Your description sounds like other thing. What i get is nothing, say no queue is created and wizard jumps back to VOIP.
Tested again: On Single LAN Multi WAN it jumps back as at all other wizards, but here i get an error-message:
Custom Bandwidths are greater than 30%. Please lower them for the wizard to continue.
I had put in 100k Up/Download, my setting from WAN was Up=10MBit, Down=100MBit. So internal calcs seem to be wrong. Tested the same thing with 1% Up/Down for VOIP, but same message appears.
Hope that helps.
-
After updating to the last snap i encounter the same behaviour than before. I end up with en endless loop jumping back to VOIP.
I have opened up a bug-report:
http://redmine.pfsense.org/issues/1081 -
Are you, by any chance, using Internet Explorer to configure the unit? I've encountered problems with using IE to configure pfSense where changes are not committed. Firefox and Chrome work fine though.
-
Nop. I use Safari, netscape doesn't even show the menus right. IE doesn't exist on Mac.
-
We always use Firefox (3.6.12) and we have the problem
Regards
Andrew
-
Should be fixed on latest snapshots.
-
Not fixed in latest version. Same it is jump to voip section.
-
If you are getting back to VoIP means that you have passed the 30% of specified link values.
Read at the first step of the wizard what it tells you.
It should warn you though that this is the case!?Can you give me your config.xml and screenshots of your wizard steps so i can replicate it.
Otherwise i cannot reproduce this. -
Here it is.
<shaper><queue><interface>wan</interface>
<name>wan</name>
<scheduler>HFSC</scheduler>
<bandwidth>800</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<queue><name>qACK</name>
<interface>wan</interface>
<priority>6</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersDefault</name>
<interface>wan</interface>
<priority>3</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn></queue>
<queue><name>qP2P</name>
<interface>wan</interface>
<priority>1</priority>
<bandwidth>20</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<default>on</default>
<ecn>on</ecn>
<linkshare3>20%</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>20%</upperlimit3>
<upperlimit>on</upperlimit></queue>
<queue><name>qVoIP</name>
<interface>wan</interface>
<priority>7</priority>
<bandwidth>32</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<realtime3>50Kb</realtime3>
<realtime>on</realtime></queue>
<queue><name>qGames</name>
<interface>wan</interface>
<priority>5</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersHigh</name>
<interface>wan</interface>
<priority>4</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>7.6%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersLow</name>
<interface>wan</interface>
<priority>2</priority>
<bandwidth>3.8</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>3.8%</linkshare3>
<linkshare>on</linkshare></queue></queue>
<queue><interface>opt1</interface>
<name>opt1</name>
<scheduler>HFSC</scheduler>
<bandwidth>800</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<queue><name>qACK</name>
<interface>opt1</interface>
<priority>6</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersDefault</name>
<interface>opt1</interface>
<priority>3</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn></queue>
<queue><name>qP2P</name>
<interface>opt1</interface>
<priority>1</priority>
<bandwidth>20</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<default>on</default>
<ecn>on</ecn>
<linkshare3>20%</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>20%</upperlimit3>
<upperlimit>on</upperlimit></queue>
<queue><name>qVoIP</name>
<interface>opt1</interface>
<priority>7</priority>
<bandwidth>32</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<realtime3>50Kb</realtime3>
<realtime>on</realtime></queue>
<queue><name>qGames</name>
<interface>opt1</interface>
<priority>5</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersHigh</name>
<interface>opt1</interface>
<priority>4</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>7.6%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersLow</name>
<interface>opt1</interface>
<priority>2</priority>
<bandwidth>3.8</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>3.8%</linkshare3>
<linkshare>on</linkshare></queue></queue>
<queue><interface>opt2</interface>
<name>opt2</name>
<scheduler>HFSC</scheduler>
<bandwidth>800</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<queue><name>qACK</name>
<interface>opt2</interface>
<priority>6</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersDefault</name>
<interface>opt2</interface>
<priority>3</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn></queue>
<queue><name>qP2P</name>
<interface>opt2</interface>
<priority>1</priority>
<bandwidth>20</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<default>on</default>
<ecn>on</ecn>
<linkshare3>20%</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>20%</upperlimit3>
<upperlimit>on</upperlimit></queue>
<queue><name>qVoIP</name>
<interface>opt2</interface>
<priority>7</priority>
<bandwidth>32</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<realtime3>50Kb</realtime3>
<realtime>on</realtime></queue>
<queue><name>qGames</name>
<interface>opt2</interface>
<priority>5</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersHigh</name>
<interface>opt2</interface>
<priority>4</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>7.6%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersLow</name>
<interface>opt2</interface>
<priority>2</priority>
<bandwidth>3.8</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>3.8%</linkshare3>
<linkshare>on</linkshare></queue></queue>
<queue><interface>opt3</interface>
<name>opt3</name>
<scheduler>HFSC</scheduler>
<bandwidth>800</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<queue><name>qACK</name>
<interface>opt3</interface>
<priority>6</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersDefault</name>
<interface>opt3</interface>
<priority>3</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn></queue>
<queue><name>qP2P</name>
<interface>opt3</interface>
<priority>1</priority>
<bandwidth>20</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<default>on</default>
<ecn>on</ecn>
<linkshare3>20%</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>20%</upperlimit3>
<upperlimit>on</upperlimit></queue>
<queue><name>qVoIP</name>
<interface>opt3</interface>
<priority>7</priority>
<bandwidth>32</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<realtime3>50Kb</realtime3>
<realtime>on</realtime></queue>
<queue><name>qGames</name>
<interface>opt3</interface>
<priority>5</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersHigh</name>
<interface>opt3</interface>
<priority>4</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>7.6%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersLow</name>
<interface>opt3</interface>
<priority>2</priority>
<bandwidth>3.8</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>3.8%</linkshare3>
<linkshare>on</linkshare></queue></queue>
<queue><interface>opt4</interface>
<name>opt4</name>
<scheduler>HFSC</scheduler>
<bandwidth>800</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<queue><name>qACK</name>
<interface>opt4</interface>
<priority>6</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersDefault</name>
<interface>opt4</interface>
<priority>3</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn></queue>
<queue><name>qP2P</name>
<interface>opt4</interface>
<priority>1</priority>
<bandwidth>20</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<default>on</default>
<ecn>on</ecn>
<linkshare3>20%</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>20%</upperlimit3>
<upperlimit>on</upperlimit></queue>
<queue><name>qVoIP</name>
<interface>opt4</interface>
<priority>7</priority>
<bandwidth>32</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<realtime3>15.2%</realtime3>
<realtime>on</realtime></queue>
<queue><name>qGames</name>
<interface>opt4</interface>
<priority>5</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersHigh</name>
<interface>opt4</interface>
<priority>4</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>7.6%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersLow</name>
<interface>opt4</interface>
<priority>2</priority>
<bandwidth>3.8</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>3.8%</linkshare3>
<linkshare>on</linkshare></queue></queue>
<queue><interface>opt5</interface>
<name>opt5</name>
<scheduler>HFSC</scheduler>
<bandwidth>800</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<queue><name>qACK</name>
<interface>opt5</interface>
<priority>6</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersDefault</name>
<interface>opt5</interface>
<priority>3</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn></queue>
<queue><name>qP2P</name>
<interface>opt5</interface>
<priority>1</priority>
<bandwidth>20</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<default>on</default>
<ecn>on</ecn>
<linkshare3>20%</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>20%</upperlimit3>
<upperlimit>on</upperlimit></queue>
<queue><name>qVoIP</name>
<interface>opt5</interface>
<priority>7</priority>
<bandwidth>32</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<realtime3>15.2%</realtime3>
<realtime>on</realtime></queue>
<queue><name>qGames</name>
<interface>opt5</interface>
<priority>5</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersHigh</name>
<interface>opt5</interface>
<priority>4</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>7.6%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersLow</name>
<interface>opt5</interface>
<priority>2</priority>
<bandwidth>3.8</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>3.8%</linkshare3>
<linkshare>on</linkshare></queue></queue>
<queue><interface>opt6</interface>
<name>opt6</name>
<scheduler>HFSC</scheduler>
<bandwidth>800</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<queue><name>qACK</name>
<interface>opt6</interface>
<priority>6</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersDefault</name>
<interface>opt6</interface>
<priority>3</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn></queue>
<queue><name>qP2P</name>
<interface>opt6</interface>
<priority>1</priority>
<bandwidth>20</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<default>on</default>
<ecn>on</ecn>
<linkshare3>20%</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>20%</upperlimit3>
<upperlimit>on</upperlimit></queue>
<queue><name>qVoIP</name>
<interface>opt6</interface>
<priority>7</priority>
<bandwidth>32</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<realtime3>15.2%</realtime3>
<realtime>on</realtime></queue>
<queue><name>qGames</name>
<interface>opt6</interface>
<priority>5</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersHigh</name>
<interface>opt6</interface>
<priority>4</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>7.6%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersLow</name>
<interface>opt6</interface>
<priority>2</priority>
<bandwidth>3.8</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>3.8%</linkshare3>
<linkshare>on</linkshare></queue></queue>
<queue><interface>opt7</interface>
<name>opt7</name>
<scheduler>HFSC</scheduler>
<bandwidth>800</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<queue><name>qACK</name>
<interface>opt7</interface>
<priority>6</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersDefault</name>
<interface>opt7</interface>
<priority>3</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn></queue>
<queue><name>qP2P</name>
<interface>opt7</interface>
<priority>1</priority>
<bandwidth>20</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<default>on</default>
<ecn>on</ecn>
<linkshare3>20%</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>20%</upperlimit3>
<upperlimit>on</upperlimit></queue>
<queue><name>qVoIP</name>
<interface>opt7</interface>
<priority>7</priority>
<bandwidth>32</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<realtime3>15.2%</realtime3>
<realtime>on</realtime></queue>
<queue><name>qGames</name>
<interface>opt7</interface>
<priority>5</priority>
<bandwidth>15.2</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.2%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersHigh</name>
<interface>opt7</interface>
<priority>4</priority>
<bandwidth>7.6</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>7.6%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersLow</name>
<interface>opt7</interface>
<priority>2</priority>
<bandwidth>3.8</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>3.8%</linkshare3>
<linkshare>on</linkshare></queue></queue>
<queue><interface>lan</interface>
<name>lan</name>
<scheduler>HFSC</scheduler>
<bandwidth>64000</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<queue><name>qInternet</name>
<interface>lan</interface>
<bandwidth>64000</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>64000Kb</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>64000Kb</upperlimit3>
<upperlimit>on</upperlimit>
<queue><name>qACK</name>
<interface>lan</interface>
<priority>6</priority>
<bandwidth>15.99</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.99%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersDefault</name>
<interface>lan</interface>
<priority>3</priority>
<bandwidth>7.995</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn></queue>
<queue><name>qP2P</name>
<interface>lan</interface>
<priority>1</priority>
<bandwidth>20</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<default>on</default>
<ecn>on</ecn>
<linkshare3>20%</linkshare3>
<linkshare>on</linkshare>
<upperlimit3>20%</upperlimit3>
<upperlimit>on</upperlimit></queue>
<queue><name>qVoIP</name>
<interface>lan</interface>
<priority>7</priority>
<bandwidth>32</bandwidth>
<bandwidthtype>Kb</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<realtime3>800Kb</realtime3>
<realtime>on</realtime></queue>
<queue><name>qGames</name>
<interface>lan</interface>
<priority>5</priority>
<bandwidth>15.99</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>15.99%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersHigh</name>
<interface>lan</interface>
<priority>4</priority>
<bandwidth>7.995</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>7.995%</linkshare3>
<linkshare>on</linkshare></queue>
<queue><name>qOthersLow</name>
<interface>lan</interface>
<priority>2</priority>
<bandwidth>3.9975</bandwidth>
<bandwidthtype>%</bandwidthtype>
<enabled>on</enabled>
<ecn>on</ecn>
<linkshare3>3.9975%</linkshare3>
<linkshare>on</linkshare></queue></queue></queue></shaper> -
Well this are the generated queues which means thew izard worked?!
-
I am also having the same problem… qDefault takes all the traffic after upgrading today (09 12 2010). I also get the Blank screen after the bogus last screen...
Kind Regards
Aubrey Kloppers -
Tried it with snap 2.0-BETA4 (i386) built on Tue Dec 7 05:18:51 EST 2010: same as before.
Here a pic from the VOIP-page after pressing "Finish". No queue is created.When Upload is 10MBit/sec, 100k/sec is never more than 30%. But no error-message comes up.
Oh, tried with IP with same result
-
Using the build built on Wed Dec 8 14:27:51 EST 2010, my traffic shaper has starting working correctly (previously I had the other shaper issue were finish lead to a blank screen). Does this build fix your issue as well?
-
Nop. Tested now, 2.0-BETA4 (i386) built on Thu Dec 9 04:14:22 EST 2010
the browser-adressfield shows this when it jumps back: https://…/wizard.php?xml=traffic_shaper_wizard.xml&stepid=2&message=
Looks as if its not fixed.
-
With update from Dec. 10 there is an error-message complaining 30% of bandwith exceeded. With update from Dec. 12 still the same error. I tried with all combinations including senseless values, no change. Every time bandwith exceeds the available bandwith, so the calculo behind seems to be broken. No queues are created.
-
Post me your ezshaper section.
-
Here we go:
<ezshaper><step1><numberofconnections>1</numberofconnections> <numberoflocalinterfaces>1</numberoflocalinterfaces></step1> <step3><local0download>640</local0download> <local0downloadspeed>Kb</local0downloadspeed> <conn0upload>2</conn0upload> <conn0uploadspeed>Kb</conn0uploadspeed> <download>2</download> <downloadspeed>Kb</downloadspeed> <enable>on</enable> <provider>Generic</provider> <address>eureka</address> <connupload>0,64</connupload> <connuploadspeed>%</connuploadspeed> <conndownload>0,64</conndownload> <conndownloadspeed>%</conndownloadspeed></step3> <step4><enable>on</enable> <bandwidthunit>%</bandwidthunit> <address>win2000</address> <bandwidth>1</bandwidth></step4> <step7><enable>on</enable> <msrdp>H</msrdp> <vnc>H</vnc> <appleremotedesktop>H</appleremotedesktop> <pcanywhere>D</pcanywhere> <irc>L</irc> <jabber>L</jabber> <icq>L</icq> <aolinstantmessenger>L</aolinstantmessenger> <msnmessenger>L</msnmessenger> <teamspeak>L</teamspeak> <pptp>D</pptp> <ipsec>H</ipsec> <streamingmp3>D</streamingmp3> <rtsp>D</rtsp> <http>H</http> <smtp>L</smtp> <pop3>L</pop3> <imap>L</imap> <lotusnotes>L</lotusnotes> <dns>H</dns> <icmp>H</icmp> <smb>D</smb> <snmp>H</snmp> <mysqlserver>H</mysqlserver> <nntp>D</nntp> <cvsup>D</cvsup> <slingbox>D</slingbox> <hbci>D</hbci></step7> <step5><enable>on</enable> <p2pcatchall>on</p2pcatchall> <bandwidth>30</bandwidth> <bandwidthunit>%</bandwidthunit> <bittorrent>on</bittorrent> <buddyshare>on</buddyshare> <cutemx>on</cutemx> <dcplusplus>on</dcplusplus> <dcc>on</dcc> <directconnect>on</directconnect> <directfileexpress>on</directfileexpress> <edonkey2000>on</edonkey2000> <fasttrack>on</fasttrack> <gnutella>on</gnutella> <grouper>on</grouper> <hotcomm>on</hotcomm> <hotlineconnect>on</hotlineconnect> <imesh>on</imesh> <napster>on</napster> <opennap>on</opennap> <scour>on</scour> <shareaza>on</shareaza> <songspy>on</songspy> <winmx>on</winmx> <aimster>on</aimster></step5> <step2><downloadscheduler>HFSC</downloadscheduler> <conn0uploadscheduler>HFSC</conn0uploadscheduler> <conn0upload>10</conn0upload> <conn0uploadspeed>Mb</conn0uploadspeed> <conn0download>100</conn0download> <conn0downloadspeed>Mb</conn0downloadspeed> <conn0interface>wan</conn0interface></step2></ezshaper>
-
Can you try with latest snap i fixed a issue in the wizards.
-
Did the fix have to do with P2P section? When i tried to use the wizard, if i set a P2P catchall, it always looped to VIOP (which is next screen after NIC configs, iirc). Once I removed the P2P settings, the loop stopped.
Hope that helps.
-
Now with snap from Dec, 23 the fix worked.
But i had to remove prior the whole ezshaper-section from config.xml. With the old entries settled it jumped back as usual. So i have 2 thoughts:
- My error, the bug was gone, but the ezshaper-section was culprit. Should have tested this really earlier at my tests.
- The bug still exists, but only pops up if any ezshaper-section exists in the environment like i had.
Due to the fact that the respective devs have seen the ezshaper-section the wizard created and said, it was nothing bugus with that entry, i tend to say that this bug will appear sooner or later again or its still present.
edit: I still have the respective config, could do tests with the thing for further development and bug-killing.
Happy navidad to all of you out there!
As always great jobs you did over the year! Thanks much!!!!!!
-
bug still present in 2.1.2011 build.