What will be the gateway of the workstations to work on my squid?
-
newbie here,
here's my setup in my pfsense box.
em0 - LAN - 192.168.1.1 (pfsense management)
em1 - WAN - xxx.xxx.xxx.xxx
em2 - VLAN1 - 192.168.2.1 (voice)
VLAN2 - 192.168.3.1 (data/agents pc)
VLAN3 - 192.168.4.1 (servers)question:
what will be the gateway i will use in my per subnet pc?thank you.
-
The gateway will be the gateway for the physical network or VLAN the client is connected to, that you're using squid doesn't change the basics of networking.
-
just want to make it clear, correct me if i am wrong. this will be the setup of their gateway per subnet.
em0 - LAN - 192.168.1.2-254 (gw:192.168.1.1)
em2 - VLAN1 - 192.168.2.2-254 (gw:192.168.2.1)
VLAN2 - 192.168.3.2-254 (gw:192.168.3.1)
VLAN3 - 192.168.4.2-254 (gw:192.168.4.1)these will work per computer in per subnet as their gateway?
thank you again.
-
From what you have posted, yes.
