What will be the gateway of the workstations to work on my squid?

[ylem]

newbie here,

here's my setup in my pfsense box.

em0 - LAN -    192.168.1.1 (pfsense management)
em1 - WAN -  xxx.xxx.xxx.xxx
em2 - VLAN1 - 192.168.2.1 (voice)
        VLAN2 - 192.168.3.1 (data/agents pc)
        VLAN3 - 192.168.4.1 (servers)

question:
what will be the gateway i will use in my per subnet pc?

thank you.

[Cry Havok]

The gateway will be the gateway for the physical network or VLAN the client is connected to, that you're using squid doesn't change the basics of networking.

[ylem]

just want to make it clear, correct me if i am wrong. this will be the setup of their gateway per subnet.

em0 - LAN    - 192.168.1.2-254 (gw:192.168.1.1)
em2 - VLAN1  - 192.168.2.2-254 (gw:192.168.2.1)
        VLAN2  - 192.168.3.2-254 (gw:192.168.3.1)
        VLAN3  - 192.168.4.2-254 (gw:192.168.4.1)

these will work per computer in per subnet as their gateway?

thank you again.

[Cry Havok]

From what you have posted, yes.