Since 3 days: Unable to check for updates
-
I tried on and off and rebooted.
-
System 1 [i386]:
em0: <intel(r) 1000="" pro="" network="" connection="" 7.1.8=""> port 0x9f00-0x9f1f mem 0xfd9c0000-0xfd9dffff,0xfd9fc000-0xfd9fffff irq 16 at device 0.0 on pci1 em0: Using MSIX interrupts with 3 vectors em1: <intel(r) 1000="" pro="" network="" connection="" 7.1.8=""> port 0xdf00-0xdf1f mem 0xfd5c0000-0xfd5dffff,0xfd5fc000-0xfd5fffff irq 17 at device 0.0 on pci2 em1: Using MSIX interrupts with 3 vectors em2: <intel(r) 1000="" pro="" network="" connection="" 7.1.8=""> port 0xcf00-0xcf1f mem 0xfddc0000-0xfdddffff,0xfddfc000-0xfddfffff irq 18 at device 0.0 on pci3 em2: Using MSIX interrupts with 3 vectors em3: <intel(r) 1000="" pro="" network="" connection="" 7.1.8=""> port 0xbf00-0xbf1f mem 0xfdbe0000-0xfdbfffff,0xfdbc0000-0xfdbdffff irq 19 at device 0.0 on pci4 em3: Using an MSI interrupt em4: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3=""> port 0xaf00-0xaf3f mem 0xfd8e0000-0xfd8fffff irq 19 at device 10.0 on pci5 em4: [FILTER] em5: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.3=""> port 0xae00-0xae3f mem 0xfd8c0000-0xfd8dffff irq 18 at device 11.0 on pci5 em5: [FILTER]</intel(r)></intel(r)></intel(r)></intel(r)></intel(r)></intel(r)>System 2: [amd64]
rlphy0: <realtek internal="" media="" interface="">PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto em0: <intel(r) 1000="" pro="" network="" connection="" 7.1.8="">port 0xc200-0xc21f mem 0xf30c0000-0xf30dffff,0xf3000000-0xf307ffff,0xf3100000-0xf3103fff irq 36 at device 5.0 on pci0 em0: Using MSIX interrupts with 3 vectors em1: <intel(r) 1000="" pro="" network="" connection="" 7.1.8="">port 0xc220-0xc23f mem 0xf30e0000-0xf30fffff,0xf3104000-0xf3107fff irq 40 at device 6.0 on pci0 em1: Using MSIX interrupts with 3 vectors</intel(r)></intel(r)></realtek> -
sysctl -a | grep tso
The values don't change if i change it in the gui.net.inet.tcp.tso: 1 hw.bce.tso_enable: 1 dev.em.0.mac_stats.tso_txd: 0 dev.em.0.mac_stats.tso_ctx_fail: 0 dev.em.1.mac_stats.tso_txd: 0 dev.em.1.mac_stats.tso_ctx_fail: 0 dev.em.2.mac_stats.tso_txd: 0 dev.em.2.mac_stats.tso_ctx_fail: 0 dev.em.3.mac_stats.tso_txd: 0 dev.em.3.mac_stats.tso_ctx_fail: 0 dev.em.4.mac_stats.tso_txd: 0 dev.em.4.mac_stats.tso_ctx_fail: 0 dev.em.5.mac_stats.tso_txd: 0 dev.em.5.mac_stats.tso_ctx_fail: 0 -
I have an amd64 firmware I built without a certain patch that was added last week. It has fixed a few issues for me and I'm curious if it would fix them for you as well.
Try to load this firmware on the amd64 system (be sure to grab a config backup just in case) and see if the behavior changes. I'm running this firmware on an amd64 VM of mine so it should be OK.
http://pingle.org/files/pfSense-Full-Update-2.0-BETA4-20101212-2328.tgz
Either try that with a console update by URL, or if that doesn't work, download it to a client machine and then upload it using the GUI.
-
The amd64 system is off-site.
And i couldn't be there the next 3 days.
You don't have the i386 version? -
No, I don't have an i386 builder setup on my workstation right now. I might be able to set one up but it probably wouldn't be today.
-
OK, I got one for i386 done now.
The URLs for both are:
amd64 - http://pingle.org/files/pfSense-Full-Update-2.0-BETA4-20101212-2328.tgz
i386 - http://pingle.org/files/pfSense-Full-Update-2.0-BETA4-20101214-1319.tgz
Give it a try, see if it helps.
-
Do these snaps come online so one can update?
I just cant get the 2.0 running…..everything seems fine, but it aint routing....
Dont have any logs, because I got so pissed that I deleted the VM :D
-
Do these snaps come online so one can update?
I just cant get the 2.0 running…..everything seems fine, but it aint routing....
Dont have any logs, because I got so pissed that I deleted the VM :D
The links I posted are not full installs, just firmware updates, and they were only intended to be used to assist the person who started this thread. If your problem isn't exactly the same, start a new thread.
-
Thx buddy!
I did…
http://forum.pfsense.org/index.php/topic,31066.0.html
:)
Do these snaps come online so one can update?
I just cant get the 2.0 running…..everything seems fine, but it aint routing....
Dont have any logs, because I got so pissed that I deleted the VM :D
The links I posted are not full installs, just firmware updates, and they were only intended to be used to assist the person who started this thread. If your problem isn't exactly the same, start a new thread.
-
I've installed the i386 update and that has solved the problem for me. Thanks JimP!
-
Thank you.
It's working.
What's the trick? -
There is a patch meant to fix pf's behavior with TSO and checksums, but it seems to be causing a few other problems.
EDIT: I disabled the patch in the repo and have a new snapshot building now. The next new snapshot dated after this update should be OK.
