Kernel panic 4-5 Nov (i386)
-
Update:
Tried the newest snapshot (20.12.2010) but I still get the kernel panic when I try the online update via GUI :-(Could I do s.th. to help you to figure this problem out?
Thanks and best regards,
Christian
-
Are you running captive portal?
-
PJ2,
thanks for your reply.
Actually yes, I have a CP set up… Do I have to deactivate it?Best regards,
Christian
-
turning off CP does the trick for me.
What network drivers are you using? fxp?
-
Actually yes, I have a CP set up… Do I have to deactivate it?
That's something to try, it may narrow down the issue considerably.
-
@PJ2:
I have these interfaces:
vr0 <- on-Board
ste <- 4-port 100Mbit Card (D-Link)@cmb:
I have now switched off CP and just clicked on "Auto Update". This time pfSense was able to check if there is a new version without a restart / kernel panic.
Tomorrow will be interesting, as then there'll be an update available.I will report back, if the update went OK tomorrow, or if I still got a kernel panic :-)
Thanks for your help anyway so far!!
Best regards,
Chris
-
Thanks Chris -
I've been trying to sort out what it is besides CP that makes the difference. I was hoping that switching NICs would solve the problem for me, but that doesn't seem to be the case. :-/
-
Hm… Well if CP really makes the difference, then I am sure that we can sort this, together with the dev, out somehow ;-)
They would be having the same issues if they turn on CP as well, wouldn't they? Or is it indeed coupled with the NIC-type?
I am eager to see what happens tomorrow ;-)
Best regards,
Chris
-
Update:
Tried the update today and… it worked ;DSo the problem really seems to be that I get a kernel panic with the update function if there is the CP enabled...
Strange isn't it?
Best regards
Christian
-
I was using a ver from the 2nd week of Dec. I would get a kernel panic every time I would start heavy downloading from the internet.. I updated the box to 16th ver and the kernel panics went away. Been updating the box every couple of days after and it seems stable. Only using Snort, no CP.
-
For a long time I thought I was the only one with this issue. Glad I'm not totally crazy.
-
@PJ2:
For a long time I thought I was the only one with this issue. Glad I'm not totally crazy.
I was thinking the same thing until I saw this topic. I had a good reason tho. I swapped my case back to mini-box M300 and started to mess around getting the picolcd to work again. Figured it was that at first but my panic had somthing to do with the nic irqs.
-
I don't think it's a hardware issue. 2.0-BETA4 (i386) built on Tue Nov 2 14:53:54 EDT 2010 is perfectly stable with Captive Portal active.
Automatic update -> success -> restart -> several minutes running -> kernel panic :-/
disconnect WAN iface cable -> manually update back to the Nov 2 versionI tried these:
pfSense-Full-Update-2.0-BETA4-20101107-0244.tgz
pfSense-Full-Update-2.0-BETA4-20101110-0504.tgz
pfSense-Full-Update-2.0-BETA4-20101115-1340.tgz
and auto-update from Dec 9, Dec 17, Dec 21all af them crashing in the same way.
Anybody know what has changed with CP between Nov 2 and Nov 7 ?
-
Update to the most current snapshot and try again. Many fixes have been checked in, some in the last couple days. It should be working again now without panics. (hopefully)
-
Just downloaded this mornings update (2.0-BETA4 (i386) built on Thu Dec 23 03:37:06 EST 2010)
Enabled captive portal, logged into the console, tried to fetch, and it panicked.I see a patch related to PPPoE that ermal checked in last night that wouldn't have made it into the current snap. I'll try again when a new snap comes out. If it still panics then, I'll get the back trace and post it.
CyroGenID - I'm using PPPoE to get my WAN's IP. How about you? Does your system still panic with the 12/23 3am build?
-
It would be in that snap, I started building it at around 1am on the i386 builder.
-
Hmm - ok. I'll try a clean install & post the backtrace if it panics on that.
-
Sounds good. Normally I wouldn't know the build times quite that well but I had to kick that off by hand after rebuilding all of the ports on the box. :-)
-
@PJ2:
I will update today to the newest snapshot and try an update (with enabled CP) tomorrow.
And yes, I am also getting my 2 WAN-IPs via PPPoE ;-)Best regards,
Chris
-
OK, here comes the update:
It …. didn't work :-(I still get the panic when CP is enabled... As soon as I disable CP, the updating works perfectly :-(
Best regards,
Chris
