TRaffic shaping on 2.0 x86 dont reach 100% of interface bandwidth

[kaneda]

Using traffic assistant multi wan and multilan it uses 50% of bandwidth. for example in my case:

WAN (2Mb)
–Internet Queue (2Mb)
          |___ qAck (19%)
          |___ qDefault (9,9%)
          |___ qP2P (4,95%)
          |___ qVoIP (512Kb)
          |___ qOthersHigh(9,9%)
          |___ qOtherLow(4,95%)
The percent values only reach 50% and bandwidth for VoIP is only 25% then I think 25% will be unused beacuse is not included at any Queue and should be at qdefault queue raising it to 34,9%.

When I do this all traffic incoming that is not HTTP dont reach servers on DMZ, LAN or VPNs.