Kernel Panic

jimp

A patch was just committed by ermal that might be a potential fix for this, or at least change the behavior somewhat. Give the next snapshot a try.

Jonb

Just as a side note I was getting a kernal panic with the PPPOA interface being selected to WAN rather than rl1. Not sure if that is due to incorrect config but if so might be worth removing to save people the hassle.

LostInIgnorance

Still getting the panic, I don't think the commit happened on the most recent snap.

Kernel page fault with the following non-sleepable locks held:
exclusive sleep mutex em0 (EM TX Lock) r = 0 (0xc2f52580) locked @ /usr/pfSensesrc/src/sys/dev/e1000/if_lem.c:1350
KDB: stack backtrace:
X_db_sym_numargs(c0eb72fb,ccc3ca90,c0a41f25,546,0,...) at X_db_sym_numargs+0x146
kdb_backtrace(546,0,ffffffff,c145d42c,ccc3cac8,...) at kdb_backtrace+0x29
witness_display_spinlock(c0eb9813,ccc3cadc,4,1,0,...) at witness_display_spinlock+0x75
witness_warn(5,0,c0ef7bc2,14,c131b3c0,...) at witness_warn+0x20d
trap(ccc3cb68) at trap+0x19e
alltraps(c341ab00,dedeadc0,c341ab00,c341ab00,ccc3cbf0,...) at alltraps+0x1b
m_tag_delete_chain(c341ab00,0,c0e6e75d,0,c2ed9d50,...) at m_tag_delete_chain+0x3f
reallocf(c341ab00,100,0,c0a42978,df,...) at reallocf+0x8a5
uma_zfree_arg(c1d7e380,c341ab00,0,d5,ccc3cc84,...) at uma_zfree_arg+0x29
m_freem(c341ab00,4,c0e6e75d,b87,c2f4e000,...) at m_freem+0x43
ed_probe_RTL80x9(c2f52580,0,c0e6e75d,546,c2f525bc,...) at 0xc06ec4d8
ed_probe_RTL80x9(c2f4e000,1,c0eb8bcc,4f,c2edb918,...) at 0xc06efea0
taskqueue_run(c2edb900,c2edb918,c0ea5f85,0,c0eb222b,...) at taskqueue_run+0x103
taskqueue_thread_loop(c2f525ec,ccc3cd38,c0eaed9a,344,c131b3c0,...) at taskqueue_thread_loop+0x68
fork_exit(c0a3b1a0,c2f525ec,ccc3cd38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xccc3cd70, ebp = 0 ---

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address= 0xdedeadc0
fault code= supervisor read, page not present
instruction pointer= 0x20:0xc0a611c8
stack pointer        = 0x28:0xccc3cba8
frame pointer        = 0x28:0xccc3cbb8
code segment= base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags= interrupt enabled, resume, IOPL = 0
current process= 0 (em0 taskq)
[thread]
Stopped at      m_tag_delete+0x48:      movl    0(%ecx),%eax
db> [/thread]

jimp

It did happen. I manually restarted the builders after the patch went in. So apparently it still isn't quite right.

jimp

Could someone who can readily reproduce this panic give this custom firmware build a try?

http://cvs.pfsense.org/~jimp/pfSense-Full-Update-2.0-BETA5-i386-20110114-2041.tgz

It was built without a patch that does the extra mbuf operations that may be triggering the panic.

LostInIgnorance

Bad news JimP, still crashes.

Kernel page fault with the following non-sleepable locks held:
exclusive sleep mutex em0 (EM TX Lock) r = 0 (0xc2f52580) locked @ /usr/pfSensesrc/src/sys/dev/e1000/if_lem.c:1350
KDB: stack backtrace:
X_db_sym_numargs(c0eb72fb,ccc3ca90,c0a41f25,546,0,...) at X_db_sym_numargs+0x146
kdb_backtrace(546,0,ffffffff,c145d42c,ccc3cac8,...) at kdb_backtrace+0x29
witness_display_spinlock(c0eb9813,ccc3cadc,4,1,0,...) at witness_display_spinlock+0x75
witness_warn(5,0,c0ef7bc2,14,c131b3c0,...) at witness_warn+0x20d
trap(ccc3cb68) at trap+0x19e
alltraps(c2feeb00,dedeadc0,c2feeb00,c2feeb00,ccc3cbf0,...) at alltraps+0x1b
m_tag_delete_chain(c2feeb00,0,c0e6e75d,0,c2ed9b50,...) at m_tag_delete_chain+0x3f
reallocf(c2feeb00,100,0,c0a42978,df,...) at reallocf+0x8a5
uma_zfree_arg(c1d7e380,c2feeb00,0,b5,ccc3cc84,...) at uma_zfree_arg+0x29
m_freem(c2feeb00,4,c0e6e75d,b87,c2f4e000,...) at m_freem+0x43
ed_probe_RTL80x9(c2f52580,0,c0e6e75d,546,c2f525bc,...) at 0xc06ec4d8
ed_probe_RTL80x9(c2f4e000,1,c0eb8bcc,4f,c2edb918,...) at 0xc06efea0
taskqueue_run(c2edb900,c2edb918,c0ea5f85,0,c0eb222b,...) at taskqueue_run+0x103
taskqueue_thread_loop(c2f525ec,ccc3cd38,c0eaed9a,344,c131b3c0,...) at taskqueue_thread_loop+0x68
fork_exit(c0a3b1a0,c2f525ec,ccc3cd38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xccc3cd70, ebp = 0 ---

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address= 0xdedeadc0
fault code= supervisor read, page not present
instruction pointer= 0x20:0xc0a611c8
stack pointer        = 0x28:0xccc3cba8
frame pointer        = 0x28:0xccc3cbb8
code segment= base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags= interrupt enabled, resume, IOPL = 0
current process= 0 (em0 taskq)
[thread]
Stopped at      m_tag_delete+0x48:      movl    0(%ecx),%eax
db> [/thread]

FisherKing

currently running 2.0-BETA5 (i386) built on Thu Jan 13 19:33:19 EST 201
not sure how far back this happens.

in a test network -
2 machines, each w/ 4 intel nics (em0 - em3)
WAN, LAN, Opt1, Opt2 (CARP interface)

Running CARP on WAN, LAN, Opt1 interfaces
Syncing on Opt2 interface.

Recently started getting panics on box2 when changing settings on box1.

Panic & BackTrace from box2 included below.


Fatal trap 12: page fault while in kernel mode

cpuid = 0; apic id = 00

fault virtual address	= 0x1a4

fault code		= supervisor read, page not present

instruction pointer	= 0x20:0xc09ee51d

stack pointer	        = 0x28:0xd670aa54

frame pointer	        = 0x28:0xd670aa70

code segment		= base 0x0, limit 0xfffff, type 0x1b

			= DPL 0, pres 1, def32 1, gran 1

processor eflags	= interrupt enabled, resume, IOPL = 0

current process		= 253 (devd)

[thread]
Stopped at      _mtx_lock_sleep+0x6d:   movl    0x1a4(%ecx),%eax

db> bt
Tracing pid 253 tid 64081 td 0xc4142000
_mtx_lock_sleep(c40f16d0,c4142000,0,c0ecfc57,fd,...) at _mtx_lock_sleep+0x6d
_mtx_lock_flags(c40f16d0,0,c0ecfc57,fd,0,...) at _mtx_lock_flags+0xf7
carp6_input(c3ae5800,c0286938,c40f3a00,c0ea9fce,3,...) at carp6_input+0x9bd
ifioctl(c46a3b44,c0286938,c40f3a00,c4142000,c40cf900,...) at ifioctl+0x141e
soo_ioctl(c412ddc8,c0286938,c40f3a00,c39aa400,c4142000,...) at soo_ioctl+0x415
kern_ioctl(c4142000,f,c0286938,c40f3a00,1a3b7d0,...) at kern_ioctl+0x1fd
ioctl(c4142000,d670acf8,c0ef7af5,c0ecdaff,c41a77f8,...) at ioctl+0x134
syscall(d670ad38) at syscall+0x220
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (54, FreeBSD ELF32, ioctl), eip = 0x8088357, esp = 0xbfbfe89c, ebp = 0xbfbfe908 ---
db> reboot
[/thread]

jimp

Out of curiosity, what type of network cards do you have in that box? Is it rl and em both? Or just em? or just rl? Or something else?

LostInIgnorance

one em network (gig embedded on the board of an old dell p4). All network traffic is VLAN'd on that one interface.

jimp

OK, just checking… It looks odd to me that the backtrace references ed_probe_RTL80x9 which is a really old realtek chip, but it may just be something weird that I don't know at that level in the kernel/network stack.

We have arranged serial console access with someone who has been able to reproduce the panic so hopefully we'll have a lead on a fix early next week.

wallabybob

@jimp:

OK, just checking… It looks odd to me that the backtrace references ed_probe_RTL80x9 which is a really old realtek chip,

Here's an extract from the stack trace:

m_freem(c2feeb00,4,c0e6e75d,b87,c2f4e000,...) at m_freem+0x43
ed_probe_RTL80x9(c2f52580,0,c0e6e75d,546,c2f525bc,...) at 0xc06ec4d8
ed_probe_RTL80x9(c2f4e000,1,c0eb8bcc,4f,c2edb918,...) at 0xc06efea0
taskqueue_run(c2edb900,c2edb918,c0ea5f85,0,c0eb222b,...) at taskqueue_run+0x103

Note the two ed_probe_RTL80x9 references are not accompanied by a symbol name and offset. I suspect ed_probe_RTL80x9 is merely the closest lower value global symbol but its too far away to warrant printing the PC as symbol+offset. If that is the case you shouldn't take too much notice of the ed_probe_RTL80x9.

LostInIgnorance

@jimp:

We have arranged serial console access with someone who has been able to reproduce the panic so hopefully we'll have a lead on a fix early next week.

JimP, is there anything I can do to help out?

jimp

Not that I'm aware of. If the mbuf tag patch isn't the cause, it almost has to be the recent e1000 driver update (em, igb, etc).

jimp

Someone else had seen that once but so far we've been unable to replicate it so the real cause can be tracked down.

It seemed to be something in the configuration, though.

LostInIgnorance

I am afraid to update since I haven't heard anything back. Is it still crashing or has it been fixed?

jimp

Nothing has changed with the drivers, but there are plenty of other things that have been fixed, it may be worth trying.

Sabbasth

How can I get the logs (system.log is flushed every boot ?) so I can help targeting the problem ?

I have 4 NICs (5 if), all Intel em, both PCI NIC or MB integrated NIC.
The computer just freezes, no reboot.

I have nmap and bandwithd installed. I'm using outboud Multi Wan, DHCP server, no VLAN, no traffic shaper, no VPN.

All was running good with an old snapshot. Freezes started after an upgrade a week ago. I currently have the lastest snapshot installed.
The freezes are random, sometimes pfSense runs some minutes, sometimes some hours.

Any FTP transfert aborts with an error (There were problems a week or so with passive FTP, but they were connection problems, here transferts are aborted).
I think this can be linked to the problem if a buffer in the driver is the problem.

jimp

@Sabbasth:

How can I get the logs (system.log is flushed every boot ?) so I can help targeting the problem ?

I have 4 NICs (5 if), all Intel em, both PCI NIC or MB integrated NIC.
The computer just freezes, no reboot.

I have nmap and bandwithd installed. I'm using outboud Multi Wan, DHCP server, no VLAN, no traffic shaper, no VPN.

All was running good with an old snapshot. Freezes started after an upgrade a week ago. I currently have the lastest snapshot installed.
The freezes are random, sometimes pfSense runs some minutes, sometimes some hours.

Any FTP transfert aborts with an error (There were problems a week or so with passive FTP, but they were connection problems, here transferts are aborted).
I think this can be linked to the problem if a buffer in the driver is the problem.

If you are seeing a freeze and not a reset/panic, then this thread isn't related. Start a new thread for that. These drivers haven't changed for several weeks now.

clarknova

2.0-BETA5 (amd64)
built on Wed Jan 12 18:01:47 EST 2011

I just experienced my first kernel panic last night after more than 8 days uptime. I'm using a SM X7SPA-H board with only the onboard Intel GBE (Intel 82574L Gigabit Ethernet). I'm not using openvpn, but both NICs have multiple vlans on them and deal only in tagged traffic.

Is there a reasonable chance that updating to the latest snap will resolve this? I don't know that I can reproduce this panic intentionally, as it hasn't happened before and I wasn't doing anything interesting when it happened. I do have clients, but the panic happened at my lowest traffic period of the day.

jimp

I don't think we have done anything that would have fixed these panics, if it is driver-related.

Are you able to switch to a developer kernel so you can obtain a backtrace?