Multi LAN - Single Wan

[jimp]

You'd need to add that subnet into an ACL for squid, I don't use the lusca version so I can't say what that might entail.

No way to get their MAC unless everything was in one large subnet without an intermediate router.

[NeophyteHeaven]

what about static routes? do i need to apply that also?
here my current?

Interface  Network  Gateway
LAN 90.0.1.0/24 90.0.0.201

[jimp]

Not sure what you're asking about applying them to. NAT? Squid? You don't need to do anything to them for static routes

[NeophyteHeaven]

my squid seems didnt capture anythin via lightsquid..
same goes for LAN2, still cant access anything on WAN (internet)

not sure what i missed here..

[NeophyteHeaven]

SQUID seems didnt work for LAN2

[jimp]

Did you add the LAN2 subnet to squid's list of authorized networks/subnets?

[NeophyteHeaven]

@jimp:

Did you add the LAN2 subnet to squid's list of authorized networks/subnets?

yep..ive already add that into that…
90.0.1.0/24
still cant get LAN2 go through the net via LAN1 -> WAN

[NeophyteHeaven]

updated with attached layout

[GGM]

Same Problem with me.

I'm using pfsense 1.2.3 release.

I have LAN(10.10.254.0/24) ,virbr2_ES(10.10.4.0/24), virbr0_SS(10.10.2.0/24),1 WAN(dhcp 192.168.2.0/24).

NAT rules:

WAN   10.10.254.0/24 * * * * * NO Auto created rule for LAN
WAN   10.10.4.0/24 * * * * * NO rule for virbr2_ES
WAN   10.10.2.0/24 * * * * * NO rule for virbr0_SS

Firewall is friendly and blocks nothing.
DNS forwarder is active.

Mysterius things happens:
from LAN:

nslookup www.google.de
Server: 10.10.254.1
Address: 10.10.254.1#53

** server can't find www.google.de: REFUSED

–-----and minutes later-------

nslookup www.google.de
Server: 192.168.2.100
Address: 192.168.2.100#53

Non-authoritative answer:
www.google.de canonical name = www.google.com.
www.google.com canonical name = www.l.google.com.
Name: www.l.google.com
Address: 74.125.79.104
Name: www.l.google.com
Address: 74.125.79.147
Name: www.l.google.com
Address: 74.125.79.99

the same on all "LANs", sometimes it works and sometimes not ??
DNS is not the only Problem.
When it works I could resolve names but from the opt interfaces virbr2_ES and virbr0_SS
sometimes i can ping in the internet(www.heise.de) and sometimes not.

Some Idears?

[NeophyteHeaven]

My Static Rules is
Interface : LAN
Destination network : 90.0.1.0/24
Gateway : 90.0.0.201

yet still i cant manage to get my LAN2 connect to the internet.

here my manual outbound.