Kernel Panic

jimp

I have a net5501-70, a Pro 1000GT (pci), and a spare pppoe DSL line. Jim, I can set this up with openvpn if you want to test against it. I have no experience with openvpn though, so would need some guidance setting that up.

Also note that my DSL line has pretty poor sync rates right now, and occasional disconnects, which is why it's not in use :/

I'll keep that in mind, though I was hoping to do it locally since that makes it a lot easier to track down…

vito

@jimp:

It might be worth trying without any packages. (the only one I have is OpenVPN client export) to see if it makes a difference.

One thing - for everyone seeing the panic on em(4) devices, the output from
pciconf -lvb
For the em card seen in the crash would be helpful.

Will try later tonight. :)

from my system
em1@pci0:3:0:0: class=0x020000 card=0x060a15d9 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfeae0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xec00, size 32, enabled
bar [1c] = type Memory, range 32, base 0xfeadc000, size 16384, enabled

vito

from another system having problems. (i can not get to the console to see what card)

em0@pci0:2:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfe6e0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0x9c00, size 32, enabled
bar [1c] = type Memory, range 32, base 0xfe6dc000, size 16384, enabled
em1@pci0:3:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfe7e0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xac00, size 32, enabled
bar [1c] = type Memory, range 32, base 0xfe7dc000, size 16384, enabled
em2@pci0:4:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfe8e0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xbc00, size 32, enabled
bar [1c] = type Memory, range 32, base 0xfe8dc000, size 16384, enabled
em3@pci0:5:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfe9e0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xcc00, size 32, enabled
bar [1c] = type Memory, range 32, base 0xfe9dc000, size 16384, enabled
em4@pci0:6:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfeae0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xdc00, size 32, enabled
bar [1c] = type Memory, range 32, base 0xfeadc000, size 16384, enabled
em5@pci0:7:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfebe0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xec00, size 32, enabled
bar [1c] = type Memory, range 32, base 0xfebdc000, size 16384, enabled

jimp

Chip ID is the same on both of those, and on another one I'm talking to that crashes… Mine that run fine are a different chip.

clarknova

em0@pci0:2:0:0: class=0x020000 card=0x060a15d9 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfeae0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xdc00, size 32, enabled
bar [1c] = type Memory, range 32, base 0xfeadc000, size 16384, enabled
em1@pci0:3:0:0: class=0x020000 card=0x060a15d9 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfebe0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xec00, size 32, enabled
bar [1c] = type Memory, range 32, base 0xfebdc000, size 16384, enabled

Interesting, my SM board has the same chip ID. My panics come around at 6-8 day intervals with no vpn use, no known factor other than time elapsed.

jimp

LostInIgnorance - one more test for you since you seem to hit it faster than anyone else - can you try switching your OpenVPN instance to TCP instead of UDP and see if it makes any difference? Just curious.

jnorell

Just another "me too" .. panics in devd on the carp backup host. Just got them while adding firewall aliases on the primary (no recent changes to VIP addrs). I'll report if tomorrow's snapshot doesn't stop them.

jimp

vito and others with em failing, can you look at the output of this:

sysctl -a | grep 'dev.em.*fail'

And report any non-zero values. Specifically with dev.em.0.mbuf_alloc_fail and dev.em.0.tx_dma_fail

vito

No non zero's

here is the output
dev.em.0.mbuf_alloc_fail: 0
dev.em.0.cluster_alloc_fail: 0
dev.em.0.tx_dma_fail: 0
dev.em.0.mac_stats.tso_ctx_fail: 0
dev.em.1.mbuf_alloc_fail: 0
dev.em.1.cluster_alloc_fail: 0
dev.em.1.tx_dma_fail: 0
dev.em.1.mac_stats.tso_ctx_fail: 0

LostInIgnorance

Nope, over TCP still did this:

Kernel page fault with the following non-sleepable locks held:
exclusive sleep mutex vr1 (network driver) r = 0 (0xc3640aec) locked @ /usr/pfSensesrc/src/sys/dev/vr/if_vr.c:1675
KDB: stack backtrace:
X_db_sym_numargs(c0c4e35f,d5341a88,c092ce85,68b,0,...) at X_db_sym_numargs+0x146
kdb_backtrace(68b,0,ffffffff,c11b7554,d5341ac0,...) at kdb_backtrace+0x29
witness_display_spinlock(c0c50877,d5341ad4,4,1,0,...) at witness_display_spinlock+0x75
witness_warn(5,0,c0c823d7,c1981a94,c3556aa0,...) at witness_warn+0x20d
trap(d5341b60) at trap+0x172
alltraps(c39bf700,dedeadc0,c39bf700,c39bf700,d5341be8,...) at alltraps+0x1b
m_tag_delete_chain(c39bf700,0,c092cc2b,0,0,...) at m_tag_delete_chain+0x3f
m_pkthdr_init(c39bf700,100,0,c092cc2b,c0c3acf7,...) at m_pkthdr_init+0x8b5
uma_zfree_arg(c1981a80,c39bf700,0,c3640000,d5341c70,...) at uma_zfree_arg+0x29
m_freem(c39bf700,4,c0c3acf7,5a3,0,...) at m_freem+0x43
ucom_attach(c3640aec,0,c0c3acf7,68b,c3640aec,...) at ucom_attach+0x88f5
ucom_attach(c3640000,d5341cc8,c08d8a54,c107b5c0,c3554238,...) at ucom_attach+0xaa17
intr_event_execute_handlers(c3556aa0,c3554200,c0c4616c,533,c3554270,...) at intr_event_execute_handlers+0x125
intr_event_add_handler(c3644b60,d5341d38,c0c45ecc,344,c3556aa0,...) at intr_event_add_handler+0x42f
fork_exit(c08c1b70,c3644b60,d5341d38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xd5341d70, ebp = 0 ---

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0xdedeadc0
fault code              = supervisor read, page not present
instruction pointer     = 0x20:0xc094b038
stack pointer           = 0x28:0xd5341ba0
frame pointer           = 0x28:0xd5341bb0
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 11 (irq5: vr1)
[thread]
Stopped at      m_tag_delete+0x48:      movl    0(%ecx),%eax
db> bt
Tracing pid 11 tid 64025 td 0xc358d780
m_tag_delete(c39bf700,dedeadc0,c39bf700,c39bf700,d5341be8,...) at m_tag_delete+0x48
m_tag_delete_chain(c39bf700,0,c092cc2b,0,0,...) at m_tag_delete_chain+0x3f
m_pkthdr_init(c39bf700,100,0,c092cc2b,c0c3acf7,...) at m_pkthdr_init+0x8b5
uma_zfree_arg(c1981a80,c39bf700,0,c3640000,d5341c70,...) at uma_zfree_arg+0x29
m_freem(c39bf700,4,c0c3acf7,5a3,0,...) at m_freem+0x43
ucom_attach(c3640aec,0,c0c3acf7,68b,c3640aec,...) at ucom_attach+0x88f5
ucom_attach(c3640000,d5341cc8,c08d8a54,c107b5c0,c3554238,...) at ucom_attach+0xaa17
intr_event_execute_handlers(c3556aa0,c3554200,c0c4616c,533,c3554270,...) at intr_event_execute_handlers+0x125
intr_event_add_handler(c3644b60,d5341d38,c0c45ecc,344,c3556aa0,...) at intr_event_add_handler+0x42f
fork_exit(c08c1b70,c3644b60,d5341d38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xd5341d70, ebp = 0 ---
db>
[/thread]

jimp

It was worth trying/checking…

eri--

Can anyone of you please test with this kernel http://files.pfsense.org/kernel.gz
Just copy it under /boot/kernel/kernel.gz on pfsense and reboot.

LostInIgnorance

@jimp:

For those wanting to debug on ALIX/other embedded devices…
/etc/rc.conf_mount_rw
fetch http://pingle.org/files/kernel_wrap_Dev.gz
tar xzpf kernel_wrap_Dev.gz -C /boot/
And then reboot. It works on my ALIX.

The next snapshot after the one building now should have them in there as well, but not the one building now.

Should I use the above process, just changing the file to http://files.pfsense.org/kernel.gz?

jimp

That kernel is probably for full installs only though, not embedded.

LostInIgnorance

so, not for me? Just for the old dell p4 with the built in em card and everyone else with gig cards.

jimp

Yeah, for the em and not for the Soekris.

eri--

Please try with tomorrows snapshots to see if it is fixed.

vito

@ermal:

Can anyone of you please test with this kernel http://files.pfsense.org/kernel.gz
Just copy it under /boot/kernel/kernel.gz on pfsense and reboot.

ermal,
I installed the kernel and it seems to work.
I copied about 2gb of data with no problems.

vito

may have spoke to soon,
No panic but firewall threw this error and lost all connects.
hard to hard reset the box

pf_test: pf_get_mtag returned null

Slaygon

Hi,

My setup consists of two boxes, both having quad intel nic's ("card=0x10a48086 chip=0x10a48086 rev=0x06" from pciconf -lvb).
Both of the boxes run 2.0-BETA5 (amd64) built on Wed Jan 26 01:53:43 EST 2011.

I have had three different types of errors occuring on these;
1 - Box spontaneously reboots
2 - Fatal trap 12 type error
3 - Box freezes

I only have the OpenOSPFD and Postfix Forwarder packages installed. No VLANs. Current uptime is 50 and 33 minutes. I am expecting one of these boxes to do #1, 2 or 3 above within the next 10 or so minutes. They've been doing that since the upgrade.
(while writing this post, one of them did indeed die by freezing)

Prior to upgrading these two, I had no panics, though I did have other errors, such as connections being reset, which was what prompted me to upgrade.

Output of pciconf -lvb:

em0@pci0:3:0:0: class=0x020000 card=0x10a48086 chip=0x10a48086 rev=0x06 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xec120000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xec100000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0x2000, size 32, enabled
em1@pci0:3:0:1: class=0x020000 card=0x10a48086 chip=0x10a48086 rev=0x06 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xec160000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xec140000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0x2020, size 32, enabled
em2@pci0:4:0:0: class=0x020000 card=0x10a48086 chip=0x10a48086 rev=0x06 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xec220000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xec200000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0x3000, size 32, enabled
em3@pci0:4:0:1: class=0x020000 card=0x10a48086 chip=0x10a48086 rev=0x06 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xec260000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xec240000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0x3020, size 32, enabled
bge0@pci0:14:0:0: class=0x020000 card=0x7051103c chip=0x165a14e4 rev=0x00 hdr=0x00
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xed000000, size 65536, enabled

The trap 12 error is as follows:

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 0
fault virtual address = 0xa8
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff801fe02f
stack pointer = 0x20:0xffffff8058b56b10
frame pointer = 0x20:0xffffff8058b56b28
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 8 (pfpurge)