Squidguard
-
I just reinstalled squid and still have the same issue :(
-
I just reinstalled squid and still have the same issue :(
Try uninstal squid/squidGuard from GUI.
Then from console deinstall any from this (if exists) - 'pkg_delete -r pkgname'squid-2.7.9 HTTP Caching Proxy squidGuard-1.4_2 A fast redirector for squid squid_radius_auth-1.10 RADIUS authenticator for squid proxy 2.5 and laterThen install squid/squidGuard new from GUI
-
It would be a good idea to remove all packages, then check the pkg_info as dvserg suggests, and pkg_delete -f each of the remaining items.
When that is done, you can reinstall your packages to make sure everything you have is current.
-
I removed all packages as suggested, renstalled squid and squiguard, and I still can't update the list
-
Just for information I just rebooted pfsense and the problem is still here
-
May be irrelevant - but including the reboot for the IPSEC VPN (wanted to make sure all caches were clear) - it started working for after the third reboot.
Regards
Andrew
-
I might have been a bit quick saying it was working. It certainly appears to be working but a look at the system log shows
Feb 2 14:48:11 php: : The command 'cp -f -p /usr/local/etc/squidGuard/blacklist.files /usr/local/etc/squidGuard' returned exit code '1', the output was 'cp: /usr/local/etc/squidGuard/blacklist.files and /usr/local/etc/squidGuard/blacklist.files are identical (not copied).'
Feb 2 14:46:35 php: : The command 'rm -R . /tmp/squidGuard/arcdb' returned exit code '1', the output was 'rm: "." and ".." may not be removed'
Feb 2 14:46:31 php: : The command 'rm -R . /tmp/squidGuard/unpack' returned exit code '1', the output was 'rm: "." and ".." may not be removed'More checking!
Andrew
-
I might have been a bit quick saying it was working. It certainly appears to be working but a look at the system log shows
Feb 2 14:48:11 php: : The command 'cp -f -p /usr/local/etc/squidGuard/blacklist.files /usr/local/etc/squidGuard' returned exit code '1', the output was 'cp: /usr/local/etc/squidGuard/blacklist.files and /usr/local/etc/squidGuard/blacklist.files are identical (not copied).'
Feb 2 14:46:35 php: : The command 'rm -R . /tmp/squidGuard/arcdb' returned exit code '1', the output was 'rm: "." and ".." may not be removed'
Feb 2 14:46:31 php: : The command 'rm -R . /tmp/squidGuard/unpack' returned exit code '1', the output was 'rm: "." and ".." may not be removed'More checking!
Andrew
It is a bug. Thanks.
-
Just to confirm, I did the following:
- removed all packages with GUI
- removed all packages with pkg_delete
- upgraded to latest snapshot
- installed squid and then squidguard
Result: the "Download" button makes nothing. No error in "Portal Auth"
-
I've recently updated the same package on pfsense 1.2.3.
The "download" button has moved to a new tab called "Blacklist" next to the "log" tab.
You can see a progress bar during update of the blacklist.
Maybe that the 2.0 version also moved there? -
Yes but in version 2.0 the progress bar stays at 0%
-
Yes but in version 2.0 the progress bar stays at 0%
What browser you use? I test this version on IE(8)/FF/Chrome
-
Firefox and IE
But the problem is not on the progress bar itself, i.e. the progress bar for packages installation works sucessfully.
When I click on "Download" button, nothing happens at all.
-
Update: tried again, I don't know why, this time it worked, I got that message:
Begin blacklist update Start download. Download archive http://urlblacklist.com/cgi-bin/commercialdownload.pl?type=download Download complete Unpack archive Scan blacklist categories. Start rebuild DB. Copy DB to workdir. Reconfigure Squid proxy. Blacklist update complete.But the progress bar has never moved from 0%, and now the message above is not cleared.
-
Update: tried again, I don't know why, this time it worked, I got that message:
But the progress bar has never moved from 0%, and now the message above is not cleared.I'm working on it as time allows. A lot had to change, so mistakes are inevitable
-
No problem take your time. Thanks :)
-
Stranger & stranger,
Running on version Tue Feb 1 19:36:32 - Squidguard is working fine, updates when asked, progress bar works.
Only thing missing would be an automated update of the script.
Regards
Andrew
-
On pfSense 2.0 with IE8 not work for me.
And pfSense 1.2 with IE8 work fine.This task does not require frequent updates
-
Should have mentioned running on Firefox 3.6.13
Just the ability to run the update script once a month?
Andrew
-
Should have mentioned running on Firefox 3.6.13
Just the ability to run the update script once a month?
Andrew
Well, maybe, but later - after editing bugs.
