Moving from a pix to pfsense, I have a few nat/firewall questions
-
I'm currenlty using a pix which I'm fimiar with. I'd like to convert to a pfsense box, and I want it to go as smoothly as possible. Here's the juicy part of my config:
ip address outside x.x.x.146 255.255.255.240
global (outside) 1 x.x.x.147 netmask 255.255.255.240static (inside,outside) x.x.x.150 192.168.1.24 netmask 255.255.255.255 0 0
static (inside,outside) x.x.x.151 192.168.1.25 netmask 255.255.255.255 0 0
conduit permit tcp host x.x.x.150 eq 1494 any
conduit permit tcp host x.x.x.151 eq 5993 anyx.x.x.146 is the pix.
x.x.x.150 is server 1
x.x.x.151 is server 2I'm assuming I'll make the wan port on pfsense x.x.x.146. I'm not sure how to program x.x.x.147 to the pfsense… This is the ip that shows up if I go to whatsmyip.org. For the servers I'm assuming two 1:1 nats, and then forwarding the individual ports in the firewall settings.
Am I close?