Country Block
-
I just looked over the package a bit and it seems like it could be useful to some. However, I have move all my mail use to the cloud so I am not sure how I could test anything.
Do you have a 2.0 Developer VM I could copy?
I just develop on regular 2.0 BETA5.
-
Figured I would give this package try on the latest 2.0beta5 build. Package says its running and i can confirm ip networks using pfctl. In my system log, I'm seeing the below errors tho:
Feb 4 16:14:53 php: /packages/countryblock/countryblock.php: The command 'rm lists/temp' returned exit code '1', the output was 'rm: lists/temp: No such file or directory' Feb 4 16:14:41 php: /packages/countryblock/countryblock.php: The command 'rm errorOUT.txt' returned exit code '1', the output was 'rm: errorOUT.txt: No such file or directory' Feb 4 16:14:41 php: /packages/countryblock/countryblock.php: The command 'rm -R /usr/local/www/packages/countryblock/lists' returned exit code '1', the output was 'rm: /usr/local/www/packages/countryblock/lists: No such file or directory'the files and directories are there, wondering if its because how the path is setup for the commands
BTW, great work on this package!
-
I wanted to report that following the instructions in this thread, I was successfully able to install Country Block in 1.2.3. and the system is currently 14,384 networks (20 countries).
I also wanted to say "thank you" because pfSense with Country Block stopped a problem that I'd been having for quite some time. I run a bulletin board system (yep, we're still out there) that is available via telnet and my poor BBS was just getting absolutely hammered by systems from all over the world such as Egypt, Turkey, UAE, Peru, India, Korea, China, and Russia just to name a few. Since I installed pfSense and Country Block, things have been "normal".
Thanks for all the hard work you've put into Country Block. It's made a world of difference here!
-
I wanted to report that following the instructions in this thread, I was successfully able to install Country Block in 1.2.3. and the system is currently 14,384 networks (20 countries).
I also wanted to say "thank you" because pfSense with Country Block stopped a problem that I'd been having for quite some time. I run a bulletin board system (yep, we're still out there) that is available via telnet and my poor BBS was just getting absolutely hammered by systems from all over the world such as Egypt, Turkey, UAE, Peru, India, Korea, China, and Russia just to name a few. Since I installed pfSense and Country Block, things have been "normal".
Thanks for all the hard work you've put into Country Block. It's made a world of difference here!
I'm glad to hear it. That's exactly what countryblock is for, reducing SPAM and unwanted traffic. Thank you for your support!
-
I just looked over the package a bit and it seems like it could be useful to some. However, I have move all my mail use to the cloud so I am not sure how I could test anything.
Do you have a 2.0 Developer VM I could copy?
I just develop on regular 2.0 BETA5.
How do you compile then?
-
I just looked over the package a bit and it seems like it could be useful to some. However, I have move all my mail use to the cloud so I am not sure how I could test anything.
Do you have a 2.0 Developer VM I could copy?
I just develop on regular 2.0 BETA5.
How do you compile then?
I don't compile. All my packages are based on scripts that I wrote.
Edit: Errr, that is to say I program in assembly or what ever makes me sound cooler :) -
I don't compile. All my packages are based on scripts that I wrote.
Edit: Errr, that is to say I program in assembly or what ever makes me sound cooler :)Your picture says it all but..program is better IMO.
-
I don't compile. All my packages are based on scripts that I wrote.
Edit: Errr, that is to say I program in assembly or what ever makes me sound cooler :)Your picture says it all but..program is better IMO.
Why program something when you can script it easily? This not only makes it easy for you to distribute but also easy for users to debug and modify for their own use. I think scripting when you can gives you and your users more power.
-
I know scripting is easier and I agree with all the points you made but I was just saying that one sounds better than the other, not that it is easier or is actually better in practice.
-
Only reason I asked about compiling because It is needed to create the binaries from source. I was not necessarily suggesting you code :)
-
I'm using pFsense 1.2.3 release and I'm getting this error:
Current Status = NOT running
/tmp/rules.debug:134: rule label too long (max 63 chars)
You are blocking 0 NetworksI got all country blocked except where I live. I am using the following packages:
- Dashboard
- Fit123
- Bandwidthd
- Rate
- Squid
Already uninstalled the package of CB and reinstaled, but I got the same error.
-
I'm using pFsense 1.2.3 release and I'm getting this error:
Current Status = NOT running
/tmp/rules.debug:134: rule label too long (max 63 chars)
You are blocking 0 NetworksI got all country blocked except where I live. I am using the following packages:
- Dashboard
- Fit123
- Bandwidthd
- Rate
- Squid
Already uninstalled the package of CB and reinstaled, but I got the same error.
How many firewall entries do you have? Does it work for a little while after you reboot?
-
It's a fresh install… I only have 2 rules on LAN and other 2 rules on the WAN... After I reboot this message appears in the WEB as soon I open , so I think don't work for a litle while...
-
Try just selecting one country, commit, and then save/update. Reboot if you still have that error.
I suspect you should be able to get one country working to begin with. Since it's a fresh install I wonder if any of the other packages are messing with it. -
Unselect all countries and comited… Then I just select one and comited again... When i did this, i saw that the checkbox for "Enable" becomes unchecked... So, I checked the "Enable" box and saved... Then it start runing normaly... To test, I select another country, and comited... The "Enable" becomes uncheked again... I turnet on the CB again and was runing fine... Now I checked all countries that i wanted and comited... Again, the "Enable" becomes uncheked... I checked it and start normaly...
Current Status = Running
You are blocking 109524 Networks
Don't know what happening , because i tried do that befoure posting here...
Let's see if the BC works fine now!!
Tanks for your help and job!! Its a realy nice Package!!!
:D
-
FYI. I just upgraded my pf2.0 vm to RC1. I was having problems with b5 so I decided to update it. I reset pfsense to factory defaults from console and I noticed on the boot afterwards the the country block script was still present. I was not able to access the webgui to remove country block prior to upgrading.
After installing countryblock on the new build I get this.
/tmp/rules.debug:74 Cannot load "/usr/local/www/packages/countryblock/countries-white.txt" No such file or directory
I know this is no real big bug but I just thought you should know
-
I am having tons of issues with RC1 not related to CB. However, my system.log is reporting missing dependencies with RC1. I will look into this further and keep you updated.
-
I am having tons of issues with RC1 not related to CB. However, my system.log is reporting missing dependencies with RC1. I will look into this further and keep you updated.
I see a lot of packages that do the same thing. I'm not sure what generates that but ignoring those errors doen't hurt. Let me know if you narrow it down to something. I looked into it a while ago and came back empty handed. I would love to fix it if it's possible.
Thanks for the heads up! -
Country Block , blocked?
To help us defray burgeoning costs, we have temporarily suspended automated downloads of Access Control Lists. We would like to restore these or move to a members only delivery system. Please help us by donating now:
Does this affect your script? If I have to download manually, what format should I grab…
-
Country Block , blocked?
To help us defray burgeoning costs, we have temporarily suspended automated downloads of Access Control Lists. We would like to restore these or move to a members only delivery system. Please help us by donating now:
Does this affect your script? If I have to download manually, what format should I grab…
There is an updated countryblock package that I released several days ago. Update and it should work.