SquidGuard Blacklists

qwaven

Thanks for the info. I didnt notice that little green button beside the Target Rules List. :)

Is it possible to create multiple lists for different groups?

Thanks!

dvserg

Thanks for the info. I didnt notice that little green button beside the Target Rules List. :)

Is it possible to create multiple lists for different groups?

Thanks!

Yes - Special ACL

qwaven

Oh I see it now. Not under 'common' but under 'special' :)

Thanks for your help.

dvserg

@qwaven:

Oh I see it now. Not under 'common' but under 'special' :)

Thanks for your help.

I just can not find another name for this tab. Can someone suggest another option?

qwaven

Are you talking about the names for Common and Special? I'd call them Common = Global and Special = Groups or Custom. :)

Cheers!

dvserg

@qwaven:

Are you talking about the names for Common and Special? I'd call them Common = Global and Special = Groups or Custom. :)

Cheers!

'Common' fairly accurately determine its value as a setting for all those who no have special settings. Perhaps a "Groups ACL" closer to the meaning than the "special ACL".
Thanks.

qwaven

Still seem to be having issue.

I've setup as follows.

[internet] – [main router/firewall] – [pfsense] – [switch] – [lan]

-PF sense is in bridging mode
-I don't seem to be able to browse at all when I try and use transparent mode
-When browsing through the proxy manually; I go to a site that shows http headers and I see I'm on a proxy. Yet none of my filter rules seem to apply. I've tried using 'common', 'special', and 'target cat…'

Thoughts?

dvserg

@qwaven:

Still seem to be having issue.

I've setup as follows.

[internet] – [main router/firewall] – [pfsense] – [switch] – [lan]

-PF sense is in bridging mode
-I don't seem to be able to browse at all when I try and use transparent mode
-When browsing through the proxy manually; I go to a site that shows http headers and I see I'm on a proxy. Yet none of my filter rules seem to apply. I've tried using 'common', 'special', and 'target cat…'

In bridging mode transparent do not work
Show you SG config

qwaven

Is there a way I can export my config or do I need to screenshot?

Thanks.

dvserg

@qwaven:

Is there a way I can export my config or do I need to screenshot?

Thanks.

Log > Proxy filter config. Copy-paste

qwaven

Oh thanks. :)


# Do not edit manually !
http_port 10.10.200.254:8080
icp_port 0

pid_filename /var/run/squid.pid
cache_effective_user proxy
cache_effective_group proxy
error_directory /usr/local/etc/squid/errors/English
icon_directory /usr/local/etc/squid/icons
visible_hostname ffdfw002
cache_mgr ithelp@dontcare.com
access_log /var/log/httpproxy/access.log
cache_log /var/log/httpproxy/cache.log
cache_store_log none
logfile_rotate 8
shutdown_lifetime 3 seconds
# Allow local network(s) on interface(s)
acl localnet src  10.10.200.0/255.255.255.0
uri_whitespace strip

cache_mem 512 MB
maximum_object_size_in_memory 32 KB
memory_replacement_policy lru
cache_replacement_policy lru
cache_dir aufs /var/squid/cache 2500 16 256
minimum_object_size 0 KB
maximum_object_size 1024 KB
offline_mode off
cache_swap_low 90
cache_swap_high 95

# No redirector configured

# Setup some default acls
acl all src 0.0.0.0/0.0.0.0
acl localhost src 127.0.0.1/255.255.255.255
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901  3128 1025-65535 
acl sslports port 443 563  
acl manager proto cache_object
acl purge method PURGE
acl connect method CONNECT
acl dynamic urlpath_regex cgi-bin \?
acl allowed_subnets src 10.10.200.0/24 
cache deny dynamic
http_access allow manager localhost

http_access deny manager
http_access allow purge localhost
http_access deny purge
http_access deny !safeports
http_access deny CONNECT !sslports

# Always allow localhost connections
http_access allow localhost

request_body_max_size 0 KB
reply_body_max_size 0 allow all
delay_pools 1
delay_class 1 2
delay_parameters 1 -1/-1 -1/-1
delay_initial_bucket_level 100
delay_access 1 allow all

# Setup allowed acls
# Allow local network(s) on interface(s)
http_access allow allowed_subnets
http_access allow localnet
# Custom options
redirect_program /usr/local/bin/squidGuard -c /usr/local/etc/squidGuard/squidGuard.conf
redirector_bypass on
redirect_children 3
# Default block all to be sure
http_access deny all

Thoughts?