Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [SOLVED] pfsense 1.2.3 / harddrive install / boot problem

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    5 Posts 2 Posters 3.3k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      andi_
      last edited by

      hy.

      i have big troubles with installing on a harddisk.
      The install procedure finishing without errors.

      The pc restarts and stops at the bootloader:

      
F1
\

      i tried the lba setting in the bios, but it didtn help.

      dmesg

      
$ dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p5 #0: Sun Dec  6 23:20:31 EST 2009
    sullrich@FreeBSD_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (2005.32-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm>real memory  = 1073414144 (1023 MB)
avail memory = 1036550144 (988 MB)
ACPI APIC Table: <a m="" i=""  oemapic="">
ioapic0 <version 2.0="">irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0:</software></version> </a><a m="" i="" oemrsdt="">on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3fef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
agp0: <intel 82865="" host="" to="" agp="" bridge="">on hostb0
pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
uhci0: <intel 82801eb="" (ich5)="" usb="" controller="" usb-a="">port 0xef00-0xef1f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <intel 82801eb="" (ich5)="" usb="" controller="" usb-a="">on uhci0
usb0: USB revision 1.0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <intel 82801eb="" (ich5)="" usb="" controller="" usb-b="">port 0xef20-0xef3f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <intel 82801eb="" (ich5)="" usb="" controller="" usb-b="">on uhci1
usb1: USB revision 1.0
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <intel 82801eb="" (ich5)="" usb="" controller="" usb-c="">port 0xef40-0xef5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <intel 82801eb="" (ich5)="" usb="" controller="" usb-c="">on uhci2
usb2: USB revision 1.0
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <intel 82801eb="" (ich5)="" usb="" controller="" usb-d="">port 0xef80-0xef9f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <intel 82801eb="" (ich5)="" usb="" controller="" usb-d="">on uhci3
usb3: USB revision 1.0
uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <intel 82801eb="" r="" (ich5)="" usb="" 2.0="" controller="">mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <intel 82801eb="" r="" (ich5)="" usb="" 2.0="" controller="">on ehci0
usb4: USB revision 2.0
uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usb4
uhub4: 8 ports with 8 removable, self powered
pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci2: <acpi pci="" bus="">on pcib2
rl0: <realtek 10="" 8139="" 100basetx="">port 0xd800-0xd8ff mem 0xfeafbc00-0xfeafbcff irq 22 at device 5.0 on pci2
miibus0: <mii bus="">on rl0
rlphy0: <realtek internal="" media="" interface="">PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:13:d4:43:de:9f
rl0: [ITHREAD]
re0: <realtek 8169="" 8169s="" 8169sb(l)="" 8110s="" 8110sb(l)="" gigabit="" ethernet="">port 0xd400-0xd4ff mem 0xfeafb800-0xfeafb8ff irq 21 at device 9.0 on pci2
re0: Chip rev. 0x04000000
re0: MAC rev. 0x00000000
miibus1: <mii bus="">on re0
rgephy0: <rtl8169s 8110s="" 8211b="" media="" interface="">PHY 1 on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:22:3f:f4:c5:8f
re0: [FILTER]
re1: <realtek 8169="" 8169s="" 8169sb(l)="" 8110s="" 8110sb(l)="" gigabit="" ethernet="">port 0xd000-0xd0ff mem 0xfeafb400-0xfeafb4ff irq 22 at device 10.0 on pci2
re1: Chip rev. 0x04000000
re1: MAC rev. 0x00000000
miibus2: <mii bus="">on re1
rgephy1: <rtl8169s 8110s="" 8211b="" media="" interface="">PHY 1 on miibus2
rgephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: Ethernet address: 00:22:3f:f4:c3:9c
re1: [FILTER]
vgapci0: <vga-compatible display="">mem 0xf6000000-0xf6ffffff,0xfeafc000-0xfeafffff,0xfe000000-0xfe7fffff irq 23 at device 11.0 on pci2
re2: <realtek 8169="" 8169s="" 8169sb(l)="" 8110s="" 8110sb(l)="" gigabit="" ethernet="">port 0xde00-0xdeff mem 0xfeafb000-0xfeafb0ff irq 20 at device 12.0 on pci2
re2: Chip rev. 0x04000000
re2: MAC rev. 0x00000000
miibus3: <mii bus="">on re2
rgephy2: <rtl8169s 8110s="" 8211b="" media="" interface="">PHY 1 on miibus3
rgephy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re2: Ethernet address: 00:22:3f:f4:c0:fc
re2: [FILTER]
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich5="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
pci0: <multimedia, audio="">at device 31.5 (no driver attached)
acpi_button0: <power button="">on acpi0
speaker0: <pc speaker="">port 0x61 on acpi0
fdc0: <floppy drive="" controller="" (fde)="">port 0x3f0-0x3f5,0x3f7 irq 6 on acpi0
fdc0: cannot reserve DMA request line
fdc0: [FILTER]
atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <acpi cpu="">on acpi0
p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
pmtimer0 on isa0
orm0: <isa option="" rom="">at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2005322500 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ad0: 114473MB <seagate st3120022a="" 3.06="">at ata0-master PIO4
acd0: CDROM <atapi cdrom="" v100t="">at ata1-master PIO4
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
Trying to mount root from cd9660:/dev/iso9660/pfSense
md0.uzip: 1690 x 65536 blocks
re0: link state changed to UP
pflog0: promiscuous mode enabled
re2: link state changed to DOWN
re2: link state changed to UP</atapi></seagate></generic></system></isa></cpu></acpi></at></keyboard></floppy></pc></power></multimedia,></ata></ata></intel></isa></pci-isa></rtl8169s></mii></realtek></vga-compatible></rtl8169s></mii></realtek></rtl8169s></mii></realtek></realtek></mii></realtek></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></intel></acpi></acpi></a></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm> 
``` <a m="" i="" oemrsdt="">The LIVE CD mode is working very well.

Has everyone an idea??

Thanks for you help

best regards
andi</a>
      1 Reply Last reply Reply Quote 0
      • Cry HavokC
        Cry Havok
        last edited by

        Have you tried searching the forum? If you installed the embedded or nano versions and you're not connected to the serial console that is expected.

        1 Reply Last reply Reply Quote 0
        • A
          andi_
          last edited by

          yes i used the search, but i didnt found a solution :(

          I installed this version:

          
pfSense-1.2.3-RELEASE-LiveCD-Installer.iso.gz

          i think it is the correct one??

          thanks

          1 Reply Last reply Reply Quote 0
          • Cry HavokC
            Cry Havok
            last edited by

            And which kernel did you pick?

            1 Reply Last reply Reply Quote 0
            • A
              andi_
              last edited by

              i solved it now.

              i installed the newest bios, and did an reinstall of pfsense.

              and now it works. :)

              i had to do an reinstall, otherwise pfsense wouldnt start…

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.