Which image to choose for Alix 2D13?
-
You've got the right image. The old embedded images were discontinued as of 1.2.3, now the NanoBSD images are the "embedded" images.
-
Excellent! Thanks!
Trent
-
Hi There,
…I'm new to pfSense and plan to install into a Soekris 5501-70. Reading the thread above, If all images are nanoBDS, then what is the difference between the 4G, 2G, ...512 MB images ? Is it some have more features/packages than others ?
Thanks!
-N
-
If all images are nanoBDS, then what is the difference between the 4G, 2G, …512 MB images ? Is it some have more features/packages than others ?
Same features but tailored for different sizes of flash drives.
-
Tailored may be too strong a word. The only difference is the size of the partitions. The features and capabilities are the same.
-
I'm also trying to install pfsense on a 4G CF. I picked the 4G image because according to the docs it is suppose to represent the size of my CF. When using physdiskwrite to copy the image to the CF I get the following error:
Which disk do you want to write? (0..4) 4
WARNING: that disk is larger than 2 GB! Make sure you're not accidentally
overwriting your primary hard disk! Proceeding on your own risk…
About to overwrite the contents of disk 4 with new data. Proceed? (y/n) y
Found compressed image file
4000317440 bytes writtenWrite error after 4000317440 bytes (8192).Is the 4G image to large for a 4G CF? Should I choose the 2G and maybe resize after install?
I followed these instructions before writing the file:
If you are unable to delete all the partitions with the Disk Management utility, try the following procedure:
1. Open a command window as admin ("cmd")
2. Type "diskpart" and hit enter.
3. Type "list disk" and hit enter to find out the number of your drive.
4. Type "select disk X" (where you replace X with the number of your drive) and hit enter.
5. Type "clean" and hit enter.When I used the 2G image everything went fine with no errors.
-
Thanks wallabybob & jimp. If I have not yet purchased an (industrial grade) CF to go with my Soekris, is there a "best way to go" regarding which image I use ? Would using a 4G be best ? .. and thus require I purchase a 4G CF card ?… Sorry for the basic questions....
-
the 4G image takes forever to install and upgrade. I'm not running any packages that need the extra space so I usually use the 2G or 1G image.
Roy…
edit: BTW, you can install a 1G or 2G image on a 4G CF.
-
Is the 4G image to large for a 4G CF? Should I choose the 2G and maybe resize after install?
From the numbers it looks like you got a 4G card that isn't as large as the 4G cards were when the images were made. Just a bit too small. The 2GB image will work fine for that.
-
Thank you rpsmith !
-
Thanks for the advice. Installed 2G and everything is working fine.
One wired thing is when the device boots I have 2 boot options:
01F0 Master 848A SanDisk SDCFH-004G
Phys C/H/S 7751/16/63 Log C/H/S 968/128/631 FreeBSD
2 FreeBSDI cleared the flash before I installed the 2G. Both images are identical even after editing one.
-
That is by design. When you do an upgrade, the slice not currently in use is upgraded, and then you switch to it. If the upgrade fails, you go back to the first slice.
