Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Psense wan lost internet

    Scheduled Pinned Locked Moved 2.0-RC Snapshot Feedback and Problems - RETIRED
    2 Posts 2 Posters 1.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T Offline
      ToxIcon
      last edited by

      Psense wan lost internet
      2.0-BETA5  (i386)
      built on Fri Feb 18 06:31:46 EST 2011

      it seems like wan loose connection under heavy load when their is a lot of traffic
      it happen once before and it was when wan was also under heavy load

      Feb 19 16:24:39 dhclient[63980]: exiting.
      Feb 19 16:24:39 dhclient[63980]: exiting.
      Feb 19 16:24:39 php: : The command '/sbin/dhclient -c /var/etc/dhclient_wan.conf em0 > /tmp/em0_output > /tmp/em0_error_output' returned exit code '15', the output was ''
      Feb 19 16:24:39 dhclient[63980]: connection closed
      Feb 19 16:24:39 dhclient[63980]: connection closed
      Feb 19 16:24:39 php: : DEVD Ethernet detached event for wan
      Feb 19 16:24:39 kernel: em0: link state changed to DOWN
      Feb 19 16:24:39 check_reload_status: Linkup starting em0
      Feb 19 16:24:38 dhclient[34460]: DHCPREQUEST on em0 to xxx.xx.xxx.xxx port 67
      Feb 19 16:24:38 dhclient[34460]: DHCPREQUEST on em0 to xxx.xx.xxx.xxx port 67
      Feb 19 16:24:38 dhclient: PREINIT
      Feb 19 16:24:38 php: : HOTPLUG: Configuring interface wan
      Feb 19 16:24:38 php: : DEVD Ethernet attached event for wan
      Feb 19 16:24:38 kernel: em0: link state changed to UP
      Feb 19 16:24:38 check_reload_status: Linkup starting em0
      Feb 19 16:24:33 php: : Sending HUP signal to 32746
      Feb 19 16:24:33 apinger: bind socket: Can't assign requested address
      Feb 19 16:24:33 apinger: Starting Alarm Pinger, apinger(36313)
      Feb 19 16:24:33 check_reload_status: reloading filter
      Feb 19 16:24:32 dhclient[25478]: exiting.
      Feb 19 16:24:32 dhclient[25478]: exiting.
      Feb 19 16:24:32 dhclient[25478]: connection closed
      Feb 19 16:24:32 dhclient[25478]: connection closed
      Feb 19 16:24:32 php: : DEVD Ethernet detached event for wan
      Feb 19 16:24:32 kernel: em0: link state changed to DOWN
      Feb 19 16:24:32 check_reload_status: Linkup starting em0
      Feb 19 16:24:32 apinger: Exiting on signal 15.
      Feb 19 16:24:32 php: : ROUTING: change default route to xxx.xx.xxx.xxx
      Feb 19 16:24:32 php: : rc.newwanip: on (IP address: xxx.xxx.xxx.xxx) (interface: wan) (real interface: em0).
      Feb 19 16:24:32 php: : rc.newwanip: Informational is starting em0.
      Feb 19 16:24:31 dhclient[56594]: bound to xxx.xxx.xxx.xxx – renewal in 43200 seconds.
      Feb 19 16:24:31 check_reload_status: rc.newwanip starting em0
      Feb 19 16:24:31 dhclient: Creating resolv.conf
      Feb 19 16:24:31 dhclient: /sbin/route add default xxx.xxx.xxx.xxx
      Feb 19 16:24:31 dhclient: Adding new routes to interface: em0
      Feb 19 16:24:31 dhclient: New Routers (em0): xxx.xxx.xxx.xxx
      Feb 19 16:24:31 dhclient: New Broadcast Address (em0): xxx.xxx.xxx.xxx
      Feb 19 16:24:31 dhclient: New Subnet Mask (em0): xxx.xxx.xxx.xxx
      Feb 19 16:24:31 dhclient: New IP Address (em0): xxx.xxx.xxx.xxx
      Feb 19 16:24:31 dhclient: ifconfig em0 inet xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx
      Feb 19 16:24:31 dhclient: Starting add_new_address()
      Feb 19 16:24:31 dhclient: REBOOT
      Feb 19 16:24:31 dhclient[56594]: DHCPACK from xxx.xxx.xxx.xxx
      Feb 19 16:24:31 dhclient[56594]: DHCPREQUEST on em0 to xxx.xxx.xxx.xxx port 67
      Feb 19 16:24:31 dhclient: PREINIT
      Feb 19 16:24:31 dhclient[39120]: exiting.
      Feb 19 16:24:31 dhclient[39120]: exiting.
      Feb 19 16:24:31 dhclient[39120]: connection closed
      Feb 19 16:24:31 dhclient[39120]: connection closed
      Feb 19 16:24:31 php: : HOTPLUG: Configuring interface wan
      Feb 19 16:24:31 php: : DEVD Ethernet attached event for wan
      Feb 19 16:24:31 kernel: em0: link state changed to UP
      Feb 19 16:24:31 check_reload_status: Linkup starting em0
      Feb 19 16:24:30 php: : Sending HUP signal to 32746
      Feb 19 16:24:30 php: : Sending HUP signal to 32746
      Feb 19 16:24:29 check_reload_status: reloading filter
      Feb 19 16:24:29 apinger: bind socket: Can't assign requested address
      Feb 19 16:24:29 apinger: Starting Alarm Pinger, apinger(57647)
      Feb 19 16:24:29 check_reload_status: reloading filter
      Feb 19 16:24:28 dhclient[46360]: exiting.
      Feb 19 16:24:28 dhclient[46360]: exiting.
      Feb 19 16:24:28 dhclient[46360]: connection closed
      Feb 19 16:24:28 dhclient[46360]: connection closed
      Feb 19 16:24:28 php: : DEVD Ethernet detached event for wan
      Feb 19 16:24:28 kernel: em0: link state changed to DOWN
      Feb 19 16:24:28 check_reload_status: Linkup starting em0
      Feb 19 16:24:28 php: : ROUTING: change default route to xxx.xxx.xxx.xxx
      Feb 19 16:24:28 apinger: Exiting on signal 15.
      Feb 19 16:24:28 php: : rc.newwanip: on (IP address: xxx.xxx.xxx.xxx) (interface: wan) (real interface: em0).
      Feb 19 16:24:28 php: : rc.newwanip: Informational is starting em0.
      Feb 19 16:24:28 php: : ROUTING: change default route to xxx.xxx.xxx.xxx
      Feb 19 16:24:28 dhclient[36928]: bound to xxx.xxx.xxx.xxx – renewal in 43200 seconds.
      Feb 19 16:24:28 check_reload_status: rc.newwanip starting em0
      Feb 19 16:24:28 php: : rc.newwanip: on (IP address: xxx.xxx.xxx.xxx) (interface: wan) (real interface: em0).
      Feb 19 16:24:28 php: : rc.newwanip: Informational is starting em0.
      Feb 19 16:24:28 dhclient: Creating resolv.conf
      Feb 19 16:24:28 dhclient: /sbin/route add default xxx.xxx.xxx.xxx
      Feb 19 16:24:28 dhclient: Adding new routes to interface: em0

      1 Reply Last reply Reply Quote 0
      • C Offline
        cmb
        last edited by

        Not sure if it's related to load but what's happening is your WAN NIC is losing link with whatever it's plugged into. Maybe your modem is rebooting under high load, or you have a bad cable or bad modem or bad NIC (probably not).

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.