Problem with Thu Mar 3 17:43:05 EST 2011
-
Same here - last snapshot (Mar 3) has completely trashed my config.
-
I solve this by editing all the rules which display empty field at summary for protocol column, in my case all those containing *
-
But is it a problrm with hoe the latest snapshot reads the XML or how a previous version wrote it?
Andrew
-
Little of both. It was an issue with an upgrade code bit I added to fix another issue.
If you gitsync and reboot it should be fine.
http://doc.pfsense.org/index.php/Updating_pfSense_code_between_snapshots
Or wait for the next new snap which is building now.
-
Meanwhile, installing an older snapshot and then using the Config History tab to restore a pre-update configuration will fix the problem.
-
Or you could move forward instead of back and make sure the fixes really work for you. :-)
-
Sure, but I believe you'd have to be on the fixed snapshot, which wasn't available when I last checked!
-
See above, re: gitsync.
-
The customer had no Internet access, so a gitsync was no possible; fortunately, he had previous snapshots downloaded.
-
They had no access from LAN because pf didn't load the NAT rules, from the box itself it would have been fine.
-
I appreciate the feedback, but had to fix the problem within a very narrow time frame (happened on a customer deployment); the idea of gitsync'ing did not occur to me (and when it happened, there was no indication on the forum threads that it had already been fixed, so a rollback really seemed the safe choice then).
I am really thankful for the work you guys have been putting on this, and - on top of that - that you still have time to offer support on the forum: amazing!
Marcello
Sao Paulo - SP - Brazil -
I shall start coming here first and checking. Then proceed with caution,
Perhaps there should be an open Red Alert Thread.
Totally hosed one box, could not go forward or backward ::)
-
The new snapshot is up now, so it's sort of a moot point.
-
Yeah right - until the next gotcha ::)
Is this the "good" snapshot?
pfSense-Full-Update-2.0-RC1-i386-20110304-0811.tgz
The new snapshot is up now, so it's sort of a moot point.
-
-
I shall start coming here first and checking. Then proceed with caution,
Perhaps there should be an open Red Alert Thread.
Totally hosed one box, could not go forward or backward ::)
nice plan but the bad build was built on Thu Mar 3 17:43:05 EST 2011 and this thread was opened on Friday Mar 4 at 03:19:57 am…
http://forum.pfsense.org/index.php/topic,33905.0.html is another fun experience for me and some others. I posted that at 12:13am but since I was so tired when I did this, the post is a little hard to read.
But many thanks to Jimp. Many enterprise firewall providers would not have found and fixed the problem as quickly as you did. Kudos!
-
I had to roll back to the signed RC1 tonight on my home Alix as I upgraded this morning and had the same issues. It's bad when my Alix is blinking SOS at me. From now on I'm only testing on my office's spare router.
-
I appreciate the feedback, but had to fix the problem within a very narrow time frame (happened on a customer deployment)…
That is pretty brave to be rolling out RC's to customers…
-
From the RC1 announcement:
"This is considered a stable release suitable for production use, as we’ve already widely deployed it over the past several months in beta and upgraded numerous systems to RC1 over the weekend. This is the preferred version for new installations at this point."
Also, they actually need some of the new features in 2.0.
-
I think we all know that RC really means we are getting close and we want to entice a few more people to help with Beta Testing the product. :)
Roy…
