VPN IPSEC "ERROR: phase2 negotiation failed due to time up waiting for phase1."
-
All the routers updated to 2.0 RC1 Feb 28 and the problem continue ….
-
All the routers updated to 2.0 RC1 March 3 and the problem continue ….
-
You will have to check the settings, All my tunnels work. The few that did not after the upgrade were caused by subtle mismatches.
-
I've double checked the setting many times also I've deleted the vpn and check one by one with the same results.
The next step is to check the network cards finding some kind of driver issue.
I can send in a private message the ip address and user/password If someone want to help me.
Thanks again,
Tito
-
The things are getting worse
Now after the last release (2.0-RC1 (i386) built on Mon Mar 14 21:14:15 EDT 2011) we can´t connect with any of the VPN sites.
-
You are sure there is no firewall rule preventing this?
-
Are you suffering the same symptom as mine (http://forum.pfsense.org/index.php/topic,33892.0.html) because I see you're using FQDN as the remote gateway.
-Raylund
-
ermal: I check the firewall rules and now I'm back to the initial stage of this post two VPNs "connected" and the rest of VPNs "not connected" with the same information as above
raylund: I replace the FQDN with the IPs and same result two VPNs "connected" and the rest of VPNs "not connected"
-
May be you check the MTU between the sites. -Raylund
-
Hi Raylund,
I will check your recommendations but I think something is happen and no one are interested to check or help in depth to solve it.
I've experience since 1994 installing and configuring routers and I've found pfSense as and extraordinary solution but in my opinion the RC1 looks like a beta instead of a Release Candidate.
:(
Tito
-
Now a new issue:
The console show "em0 –--- watchdog resetting"
:(
Tito
-
I just upgraded to the 16th Release and it broke my ipsec as well. I keep getting```
[Remote Side not responding]
