2.0-RC1 fix ?

clarknova

We will probably move away from the yandex drivers in the near future, but we're trying to figure out where (back to what we had or to an updated version of the driver from FreeBSD -stable or -current).

Yeeouch! I had terrible performance on a certain build before switching to Yandex.

jimp

Were the RC1 builds OK? If so, those had no Yandex drivers. Some people have connectivity issues and traffic accounting issues (and the watchdog issues) and other things with the Yandex drivers, and they didn't fix the problems we originally hoped they would.

clarknova

http://marc.info/?l=pfsense-support&m=129903385420047&w=2

http://marc.info/?l=pfsense-support&m=129913331924304&w=2

To summarize, I was the OP in that thread. Routing performance in the March 1 RC snap was poorer than expected, and inconsistent. Then on the March 4 RC snap routing performance improved to the expected level, and Seth Mos indicated that the Yandex driver had just gone into the builds.

I had no other issues with that system, except maybe mbuf leaks. I no longer have access to it.

Cino

Any build I've used after March 3rd has giving me a couple of issues. Mostly with the LCDproc package sockets timing out after a reboot. Restart the service and it works like it did before. I have to do this with every 'reset of states' also..And I have the NTPd issue. When using the build right before the Yandex drivers were added, no issues.

Since i'm testing the IPv6 code, I ended up using the pfSense-2.0-RC1-ipv6-i386-20110228-1715.iso.gz image and gitsync as updates are added, mostly after a mainline merge to smos git.

I've heard of some performance issues with RC1 but I haven't experience any as I'm routing over a 50/5 cable link.

AhnHEL

Will be testing the following commits tomorrow once there is a snapshot built that includes them.

https://rcs.pfsense.org/projects/pfsense-tools/repos/mainline/commits/9ef97a5994abb78061277f4f29d2067b7b833a9d

https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/b2305621e59b330290d337e7855acb8e90b6dd65

Fingers crossed

AhnHEL

NTPD seems to be fixed but I'm still getting the watchdog messages on the 3/19 RC1 snapshot


Mar 20 05:27:03 	php: : Hotplug event detected for lan but ignoring since interface is configured with static IP (aaa.bbb.ccc.ddd)
Mar 20 05:27:03 	check_reload_status: Linkup starting em0
Mar 20 05:27:03 	kernel: em0: link state changed to UP
Mar 20 05:27:01 	php: : Hotplug event detected for lan but ignoring since interface is configured with static IP (aaa.bbb.ccc.ddd)
Mar 20 05:27:00 	check_reload_status: Linkup starting em0
Mar 20 05:27:00 	kernel: em0: link state changed to DOWN
Mar 20 05:27:00 	kernel: em0: Watchdog timeout -- resetting
Mar 20 05:23:33 	php: : Hotplug event detected for lan but ignoring since interface is configured with static IP (aaa.bbb.ccc.ddd)
Mar 20 05:23:33 	kernel: em0: link state changed to UP
Mar 20 05:23:33 	check_reload_status: Linkup starting em0
Mar 20 05:23:31 	php: : Hotplug event detected for lan but ignoring since interface is configured with static IP (aaa.bbb.ccc.ddd)
Mar 20 05:23:30 	check_reload_status: Linkup starting em0

Edit: OK, looking good with the snap from the 20th.

estragon

Hello,

I'm using a Jasomi 7650 (alias Lanner FW 7650 - [network: Intel 82540EM and Intel 82551QM])

with Pfsense 2.0-RC1 (i386) built on Sun Mar 20 02:20:38 EDT 2011

and have the same problem :

Mar 21 18:52:12 	php: : Hotplug event detected for opt4 but ignoring since interface is configured with static IP (192.168.5.1)
Mar 21 18:52:12 	kernel: em0: link state changed to UP
Mar 21 18:52:12 	check_reload_status: Linkup starting em0
Mar 21 18:52:09 	php: : Hotplug event detected for opt4 but ignoring since interface is configured with static IP (192.168.5.1)
Mar 21 18:52:09 	kernel: em0: link state changed to DOWN
Mar 21 18:52:09 	kernel: em0: Watchdog timeout -- resetting
Mar 21 18:52:09 	check_reload_status: Linkup starting em0
Mar 21 18:45:02 	php: : Hotplug event detected for opt4 but ignoring since interface is configured with static IP (192.168.5.1)
Mar 21 18:45:01 	kernel: em0: link state changed to UP
Mar 21 18:45:01 	check_reload_status: Linkup starting em0
Mar 21 18:44:59 	php: : Hotplug event detected for opt4 but ignoring since interface is configured with static IP (192.168.5.1)
Mar 21 18:44:58 	check_reload_status: Linkup starting em0
Mar 21 18:44:58 	kernel: em0: link state changed to DOWN

just to complet the informations …

AhnHEL

Estragon, this was fixed, upgrade to a newer snap.

photonman

@onhel:

Estragon, this was fixed, upgrade to a newer snap.

the EM watchdog errors are fixed now?

AhnHEL

Yes, I used the 3/20 update snapshot 1657 and my em's are running without error.

estragon

hello,
I go on the newer snap
2.0-RC1 (i386) built on Tue Mar 22 01:13:42 EDT 2011
and no more watchdog issue … (my system log entries is now so depopulate ::))

incidentally, from some snap install I need to reboot after the installation in the way that the Wan interface can acquire the IP from DHCP, and these issue seam's to be resolved too ...

many tanks :)

photonman

yandex drivers are out now so no more guarddogs

were the yandex supposed to be better performance?