Voucher database synchronization

stefanero

should I make a bugreport at the bugtracker?

since I got no featback I wonder if its a configuration issue or a bug :)

stefanero

Hi,

I think I found kinda relation between the duration of the voucher and the length of the ticket.

Looks like only the 1st digit is actually "active" in the end.

For example:

I create 3 vouchers:

200 min

300 min

400 min

and on the test page(status_captiveportal_test.php) it shows :

FqGkVaxLwZc (3/4) good for 400 Minutes

when a voucher is actullay used it shows in the system logs -> captive portal

Voucher login good for 4 min.: FqGkVaxLwZc,

Same with 300 min, and then its valid 3 min duration, 200 min -> 2min duration…

Maybe this helps a little
Stefanero

eri--

Can you please test with latest snapshot and also post the system log on the problematic portal.

stefanero

Hi erml,

thank you for the reply,

I am now running

2.0-RC1 (i386)
built on Mon Mar 7 12:03:17 EST 2011

I created some new voucher, when I go to test page first:

status_captiveportal_vouchers.php –> active_vouchers page

Warning: file(/var/db/voucher_active_4.db): failed to open stream: No such file or directory in /usr/local/www/status_captiveportal_vouchers.php on line 61 Warning: Invalid argument supplied for foreach() in /usr/local/www/status_captiveportal_vouchers.php on line 62

but the rest test itself is okey,

PchcMGLVFct (4/3) good for 500 Minutes
Access granted for 500 Minutes in total.

on the pfsense system logs

Last 50 system log entries
Mar 8 16:09:56	php: : The command 'pfctl -K ' returned exit code '1', the output was 'pfctl: option requires an argument -- K usage: pfctl [-AdeghmNnOqRrvz] [-a anchor] [-D macro=value] [-F modifier] [-f file] [-i interface] [-K host | network] [-k host | network ] [-b host | network ] [-o [level]] [-p device] [-s modifier ] [-t table -T command [address ...]] [-x level]'
Mar 8 16:09:56	php: : The command 'pfctl -k ' returned exit code '1', the output was 'pfctl: option requires an argument -- k usage: pfctl [-AdeghmNnOqRrvz] [-a anchor] [-D macro=value] [-F modifier] [-f file] [-i interface] [-K host | network] [-k host | network ] [-b host | network ] [-o [level]] [-p device] [-s modifier ] [-t table -T command [address ...]] [-x level]'
Mar 8 16:09:56	php: : The command '/sbin/ipfw table 2 delete ' returned exit code '64', the output was 'ipfw: IP address required'
Mar 8 16:09:56	php: : The command '/sbin/ipfw table 1 delete ' returned exit code '64', the output was 'ipfw: IP address required'
Mar 8 16:09:46	php: /index.php: CaptivePortalVoucherSync XMLRPC reload data success with http://ip-addr:8080:8080 (pfsense.exec_php).
Mar 8 16:09:46	php: /index.php: Captive Portal Voucher XMLRPC sync data http://ip-addr:8080:8080.

Last 50 Portal Auth log entries
Mar 8 16:09:56	logportalauth[52446]: TIMEOUT: , ,
Mar 8 16:09:46	logportalauth[63795]: Voucher login good for 5 min.: PchcMGLVFct, , ip-addr-laptop

btw, when I redo the test, with the current logged in voucher I get:

	PchcMGLVFct (4/2) active and good for 1 Minutes
	Access granted for 1 Minutes in total.

hope to help
stefanero

stefanero

hmm

I just tryed some more, and now the user is at least not logged out anymore after the 5min in this case.

but i wonder if he ever will be logged out, since the voucher is not shown in the "active vouchers" page anymore.

and, when I now use the voucher again in the test page it sais -> denied.

stefanero

stefanero

Well good morning,

I tryed latestet snapsshot

2.0-RC1 (i386) 
built on Wed Mar 9 18:16:20 EST 2011 

You are on the latest version.

and deleted all my existing vouchers on the system in the LAN, then created a new roll and syncted it to the DMZ server.

but still -> no go

system logs on dmz box:

Mar 10 08:11:22	php: /index.php: CaptivePortalVoucherSync XMLRPC reload data success with http://lan-server-ip:8080:8080 (pfsense.exec_php).
Mar 10 08:11:22	php: /index.php: Captive Portal Voucher XMLRPC sync data http://lan-server-ip:8080:8080.

captive logs on dmz box:

Mar 10 08:13:05	logportalauth[36258]: TIMEOUT: qNday4Qihc63, , ip-addr
Mar 10 08:11:22	logportalauth[60559]: Voucher login good for 1 min.: qNday4Qihc63, , ip-addr

and its a 1440 min voucher :-\ so again only the 1st digit is taken into account for voucher lifetime

the tests on the test pages were showing informations just fine.

Also in the Lan-pfsense I can see in the voucher status page:

qNday4Qihc63	1	03/10/2011 08:11:22	1432 min	03/11/2011 08:11:22

cu
stefanero

stefanero

Hi again,

thought I tryed latest snapshot again.

But problem still present.

2.0-RC1 (i386) 
built on Sun Mar 13 06:53:56 EDT 2011


Mar 14 09:36:31	logportalauth[61338]: Voucher login good for 1 min.: sJ74hkCMmQz, , 172.31.128.9

cu
stefanero

stefanero

Hello,

still not working btw, "mar 20th" snapshot

eri--

Can you show me a screenshot of how you have configured the sync voucher section on pfSense?

stefanero

Hi erml,

sure I can attached is a screenshot.

The internal pfsense runs on a class 10 - priv network, we use a different user and run on port 8080 instead of the default.

Like I already wrote in my previous posts, I think the syncronization is kinda working.

Going to Status -> Captive Portal, I can see the rolls from the Lan - pfSense and also the test page with a voucher from lan works fine.

Its only a matter when I actually use a voucher on a laptop.

cu
stefanero

screenshot_002.png_thumb

sullrich

Check tomorrow's snapshot. I am about to commit a fix for this.

stefanero

Thank you very much.

I will let you know as soon as possible.

cu
stefanero

qbik

Can this be implemented to sync on a non pfsense machine? To send info an sync with another DB?

eri--

If you can talk the same xmlrpc than yes you can implement it somewhere else.

stefanero

Good morning,

well sry to tell but still no difference to the situation before.

Voucher	Roll	Activated at	Expires in	Expires at	
adjYYXFyUe73	1	03/25/2011 08:34:21	0 min	03/25/2011 08:35:21

It should have been a 1440 min voucher and not just 1 minute. The sync works as before, I can test the vouchers on the test page showing up fine with a duration of 1440 minutes,
but when they get entered in the client, the duration is just the first digit of the duration of the voucher.

so when a voucher runs 200 minutes, the duration is 2, when a voucher is valid 300 minutes the duration is 3… and so on.

regards
Stefanero

eri--

Now should be all functioning properly.
Test with latest snapshots.

stefanero

Hi ermal,

this is looking good now, finally working :)

thnx a lot to you and sullrich

stefanero